• 문화기술의 융합
• /
• 제9권3호
• /
• pp.721-726
• /
• 2023

본 논문에서는 접지된 2중 유전체층 사이의 도체띠 격자구조에 의한 TM(tranverse magnetic) 전자파 산란 문제를 전자파 수치해석방법으로 알려진 FGMM(fourier galerkin moment method)과 PMM(point matching method)을 적용하여 해석하였다. 경계조건들은 미지의 계수를 구하기 위하여 이용하였다. 접지된 2중 유전층의 비유전율과 두께는 동일한 값에 대해서만 취급하였으며, 유전체층의 두께와 비유전율의 값이 증가하면 전반적으로 반사전력은 증가하였으며, 반사전력의 최소값들이 스트립 폭이 증가하는 방향으로 이동하였다. 본 논문의 제안된 구조에 대해 FGMM과 PMM의 수치해석 방법을 적용한 수치결과들은 매우 잘 일치하였다.

• 한국지진공학회논문집
• /
• 제27권1호
• /
• pp.25-35
• /
• 2023

Considering the non-linear behavior of structure and soil when evaluating a nuclear power plant's seismic safety under a beyond-design basis earthquake is essential. In order to obtain the nonlinear response of a nuclear power plant structure, a time-domain SSI analysis method that considers the nonlinearity of soil and structure and the nonlinear Soil-Structure Interaction (SSI) effect is necessary. The Boundary Reaction Method (BRM) is a time-domain SSI analysis method. The BRM can be applied effectively with a Perfectly Matched Layer (PML), which is an effective energy absorbing boundary condition. The BRM has a characteristic that the magnitude of the response in far-field soil increases as the boundary interface of the effective seismic load moves outward. In addition, the PML has poor absorption performance of low-frequency waves. For this reason, the accuracy of the low-frequency response may be degraded when analyzing the combination of the BRM and the PML. In this study, the accuracy of the analysis response was improved by adjusting the PML input parameters to improve this problem. The accuracy of the response was evaluated by using the analysis response using KIESSI-3D, a frequency domain SSI analysis program, as a reference solution. As a result of the analysis applying the optimal PML parameter, the average error rate of the acceleration response spectrum for 9 degrees of freedom of the structure was 3.40%, which was highly similar to the reference result. In addition, time-domain nonlinear SSI analysis was performed with the soil's nonlinearity to show this study's applicability. As a result of nonlinear SSI analysis, plastic deformation was concentrated in the soil around the foundation. The analysis results found that the analysis method combining BRM and PML can be effectively applied to the seismic response analysis of nuclear power plant structures.

• 한국전산구조공학회논문집
• /
• 제20권5호
• /
• pp.671-680
• /
• 2007

본 연구의 최종 목적은 유체가 빠른 속도로 가해지는 물체의 경계면에서 흡입(suction) 혹은 방출(injection)을 통해 유체를 제어함으로 드래그(drag)를 감소하고자 하는 것이다. 그러나 유체는 대용량, 비선형성을 가지고 있어서 직접적인 해석은 물론, 최적화를 적용한다는 것은 매우 어려운 일이다. 이를 위해 우리는 새로운 알고리즘과 기법들을 개발하였다. 본 연구에서는 이 기법들에 대한 검증을 하고, 나아가 최적화 기법을 사용하여 드래그를 감소하기 위해 흡입량과 방출량을 구하였다. 그리고 이 흡입과 방출을 가할 수 있는 구멍의 수와 위치에 따른 변화를 알아보았다. 본 연구에서 개발된 알고리즘과 기법들을 사용하였을 경우, 기존에는 해결 할 수도 없었던 문제를 가능하게 만들었으며, 기존에 저자가 1차로 개발한 바 있는 방법에 비해서도 더욱 효과적이라는 것을 입증하였다. 그리고 드래그 감소라는 차원에서 본다면 흡입과 방출을 가할 수 있는 구멍의 숫자가 많을수록 효과가 높으나 그다지 많은 수를 필요로 하지 않는다는 것을 알게 되었으며, 구멍의 위치는 유체의 경계층이 분리되는 약간 아래가 가장 최적의 위치라는 것을 알게 되었다.

• Nuclear Engineering and Technology
• /
• 제42권6호
• /
• pp.620-635
• /
• 2010

In this paper we describe current activities on the project Multi-Scale Modeling and Analysis of convective boiling (MSMA), conducted jointly by the Paul Scherrer Institute (PSI) and the Swiss Nuclear Utilities (Swissnuclear). The long-term aim of the MSMA project is to formulate improved closure laws for Computational Fluid Dynamics (CFD) simulations for prediction of convective boiling and eventually of the Critical Heat Flux (CHF). As boiling is controlled by the competition of numerous phenomena at various length and time scales, a multi-scale approach is employed to tackle the problem at different scales. In the MSMA project, the scales on which we focus range from the CFD scale (macro-scale), bubble size scale (meso-scale), liquid micro-layer and triple interline scale (micro-scale), and molecular scale (nano-scale). The current focus of the project is on micro- and meso-scales modeling. The numerical framework comprises a highly efficient, parallel DNS solver, the PSI-BOIL code. The code has incorporated an Immersed Boundary Method (IBM) to tackle complex geometries. For simulation of meso-scales (bubbles), we use the Constrained Interpolation Profile method: Conservative Semi-Lagrangian $2^{nd}$ order (CIP-CSL2). The phase change is described either by applying conventional jump conditions at the interface, or by using the Phase Field (PF) approach. In this work, we present selected results for flows in complex geometry using the IBM, selected bubbly flow simulations using the CIP-CSL2 method and results for phase change using the PF approach. In the subsequent stage of the project, the importance of effects of nano-scale processes on the global boiling heat transfer will be evaluated. To validate the models, more experimental information will be needed in the future, so it is expected that the MSMA project will become the seed for a long-term, combined theoretical and experimental program.

• 대한기계학회논문집
• /
• 제3권3호
• /
• pp.91-97
• /
• 1979

Boundary layer equations (partial differential equations) can be transformed to ordinary diffential equations with constant coeffieients in terms of similarity transformed to ordinary differential equations with constant coeffieients in terms of similarity transformations in the heat tranfer analysis on the surface of any axiaymmetric boiles. The azimuth functions can not be uniquely determined because of the singular behavior at the stagnation point(X=0.deg.).In spite of the azimuth functions behaving singularly, many of researchers have analyzed the heat transfer problem on a horizontal chlinder or a sphere, supposing the set of solutions( $H_{1}$ & G$_{1}$) of being yieled from the simple differential equation to be unique solution of therazimuth functions. In order to ascertain whether mathematical incompatibility as mentioned above can be admitted in the viewpoint of enginerring or not, condensation heat transfer coefficients on a sphere are computed for all azimuth functions( $H_{1}$ G$_{1}$ & $H_{2}$ G$_{2}$) and comparisons with the experimental result are discussed.

• 터널과지하공간
• /
• 제3권1호
• /
• pp.63-79
• /
• 1993

The design of tunnels in rock masses often demands more informations on geologic features and rock mass properties than acquired by usual field survey and laboratory testings. In practice, the situation that a perfect set of geological and mechanical input data is given to geomechanics design engineer is rare, while the engineers are asked to achieve a high level of reliability in their design products. This study presents an artificial neural network which is developed to resolve the difficulties encountered in conventional design techniques, particulary the problem of deteriorating the confidence of existing numerical techniques such as the finite element, boundary element and distinct element methods due to the incomplete adn vague input data. The neural network has inferring capabilities to identify the possible failure modes, support requirements and its timing for underground openings, from previous case histories. Use of the neural network has resulted in a better estimate of the correlation between systems of rock mass classifications such as the RMR and Q systems. A back propagation learning algorithm together with a multi-layer network structure is adopted to enhance the inferential accuracy and efficiency of the neural network. A series of experiments comparing the results of the neural network with the actual field observations are performed to demonstrate the abilities of the artificial neural network as a new tunnel design assistance system.

• 한국정밀공학회지
• /
• 제25권9호
• /
• pp.109-115
• /
• 2008

The cleaning process of contaminant particles adhering to the microchips, integrated circuits (ICs) or the like is essential in modern microelectronics industry. In the cleaning process particularly working with the application of inert gases, the removal of contaminant particles of submicron scale is very difficult because the particles are prone to reside inside the boundary layer of the working fluid, The use of cryogenic $CO_2$ cleaning method is increasing rapidly as an alternative to solve this problem. In contrast to the merits of high efficiency of this process in the removal of minute particles compared to the others, even fundamental parametric studies for the optimal process design in this cleaning process are hardly done up to date, In this study, we attempted to measure the cleaning efficiency with the variations of some principal parameters such as mass flow rate, injection distance and angle, and tried to draw out optimal cleaning conditions by measuring and evaluating an effective cleaning width called $d_{50}$.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2005년도 추계 학술대회논문집
• /
• pp.293-298
• /
• 2005

We calculate the coordinates of an axisymmetric nozzle with a central body. This nozzle ensures a transonic flow with a plane sound surface, which is orthogonal to the symmetry axis and has a wall kink at the sonic point, The Chaplygin transformation in the subsonic part of the flow leads the Dirichlet problem for a system of nonlinear equations. The definition domain of the solution in the velocity-hodograph plane is taken as a rectangle. This enables one to obtain the nozzle with a monotonic distribution of velocity along its subsonic part. In the nonlinear differential equation, the linear Chaplygin operator for plane flows is separated, which allows the iterative calculation of the solution. The supersonic part of the nozzle is calculated under the assumption that the flow at the nozzle exit is uniform and parallel to the symmetry axis; i.e., the supersonic jet outflows to the submerged space with the same pressure. The calculation is performed by the characteristic method. The exact solution of Tricomi equation for near-sonic flows with the straight sonic line is used to 'move away' the sound plane. The velocity distribution alone the supersonic part of the nozzle is also monotonic, which ensures the absence of the boundary-layer separation and, therefore, the adequacy of the ideal-gas model. calculations show that the flow in the supersonic part of the nozzle is continuous (compression shocks are absent)

• Structural Monitoring and Maintenance
• /
• 제4권2호
• /
• pp.115-131
• /
• 2017

Classical flutter of wind turbine blades indicates a type of aeroelastic instability with fully attached boundary layer where a torsional blade mode couples to a flapwise bending mode, resulting in a mutual rapid growth of the amplitudes. In this paper the monitoring problem of onset of flutter is investigated from a detection point of view. The criterion is stated in terms of the exceeding of a defined envelope process of a specific maximum torsional vibration threshold. At a certain instant of time, a limited part of the previously measured torsional vibration signal at the tip of blade is decomposed through the Empirical Mode Decomposition (EMD) method, and the 1st Intrinsic Mode Function (IMF) is assumed to represent the response in the flutter mode. Next, an envelope time series of the indicated modal response is obtained in terms of a Hilbert transform. Finally, a flutter onset criterion is proposed, based on the indicated envelope process. The proposed online flutter monitoring method provided a practical and direct way to detect onset of flutter during operation. The algorithm has been illustrated by a 907-DOFs aeroelastic model for wind turbines, where the tower and the drive train is modelled by 7 DOFs, and each blade by means of 50 3-D Bernoulli-Euler beam elements.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
• /
• pp.989-992
• /
• 2006

The new approach to the problem of oil spill detection consisting in combined use of all available quasiconcurrent satellite information (AVHRR NOAA, TOPEX/Poseidon, Jason-1, MODIS Terra/Aqua, QuikSCAT) is suggested. We present the results of the application of the proposed approach to the operational monitoring of seawater condition and pollution in the coastal zone of northeastern Black Sea conducted in 2006. This monitoring is based on daily receiving, processing and analysis of data different in nature (microwave radar images, optical and infrared data), resolution and surface coverage. These data allow us to retrieve information on seawater pollution, sea surface and air-sea boundary layer conditions, seawater temperature and suspended matter distributions, chlorophyll a concentration, mesoscale water dynamics, near-surface wind and surface wave fields. The focus is on coastal seawater circulation mechanisms and their impact on the evolution of pollutants.