• Journal of the Korean Society for Marine Environment & Energy
• /
• v.4 no.3
• /
• pp.53-64
• /
• 2001

Bathing beach may be one of the ocean resorts in popular, which peoples can easily access in summer. Three beaches in Jeiu island are surveyed about natural environmental conditions using coastal engineering technique and questionnaire are carried out. Also the satisfaction index on the sand size, wave height, water temperature, transparency and bottom slope is gained very well. The results obtained from this study can be utilized making a new artificial bathing beach in the future.

• Korean Journal of Microbiology
• /
• v.19 no.2
• /
• pp.45-51
• /
• 1981

The physico-chemical and biological factors of coastal sea water were measured bimonthly from 1976 to 1979 for elucidating the relationship between microbial distribution and environmental factors at Masan and Jinhae bay. The experimental results are summarized as followings : 1) The polulation size of bactriz in sea water were increasing as the water temperature increased, and that was higher at station 2 and 3 than at station 1. The number of fungi showed the highest value on July on bottom. The population size of yeast showed no seasonal variation and also showed a relation with the geographic distance. 2) The correlationship between microbial distribution and environmental factors showed little coefficiency in surface water. And the other hand, at bottom water, between general bacteria and water temperature and dissolved oxygen, and between yeast and salinity, there were relatively high coefficiecy.

• Proceedings of the KIEE Conference
• /
• 2007.11a
• /
• pp.214-215
• /
• 2007

Unstable sustain discharges can occur at the bottom cells of the panel at high temperature. To solve this phenomenon, the wall charge variation during an address period was investigated. A test panel of 7.5 inch XGA level was used and one green cell was measured. In order to realize operating condition equal to that of the bottom cells of 50 inch panel, the addressing stress pulses are applied. It seems that the resultant wall charge loss during address period increased with increase of temperature as well as the addressing stress pulse voltage. Therefore it results in unstable discharge during sustain period.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.5
• /
• pp.670-678
• /
• 1997

A method to mitigate the thermal stratification phenomenon of pressurizer surge line is proposed by heating bottom outside of horizontal pipe. Unsteady two dimensional model has been used to numerically investigate an effect of heating the bottom of pipe. The dimensionless governing equations are solved by using the control volume formulation and SIMPLE algorithm. Temperature and streamline profiles of fluids and pipe walls with time are compared with the previous study result. The numerical result of this study shows that the outside heating can relaxate the thermal stratification flow of the pressurizer surge line. Maximum dimensionless temperature difference between hot and cold sections of the pipe inner wall which causes thermal stratification was reduced from 0.514 to 0.424 at dimensionless time 1, 632 and 1, 500 respectively.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.15 no.2
• /
• pp.196-203
• /
• 1986

The melting phenomena of horizontal cylindrical ice-bar immersed in water and air concentrically in the cylinder are experimentally investigated for the temperature range from $3.5^{\circ}C\;to\;2.5^{\circ}C$. The shapes of the melting ice-bar are recorded photographically by the shadowgraph method. The shadowgraphs of the melting ice-bar show that water adjacent to the bar flows upward for the temperature range from $3.5^{\circ}C\;to\;5.8^{\circ}C$ while above $5.8^|\circ}C$ the flow is downward direction. The local and average Nusselt numbers are obtoined with the recorded shadowgraphs and comparator. Melting shapes of the ice-bar in the air show the vortex motion in the bottom portion of the bar, whereas no vortex motion appears in the bottom portion when the bar is melted in the water.

• Korean Journal of Materials Research
• /
• v.13 no.2
• /
• pp.69-73
• /
• 2003

In this work, $IrO_2$thin films as bottom electrode of ferroelectric capacitors were deposited and characterized. The $IrO_2$films deposited in the conditions of 25, 40 and 50% oxygen ambient by sputtering method were annealed at 600, 700 and $800^{\circ}C$, respectively. It was found that the crystallinity and the surface morphology of $IrO_2$films affected the surface properties and electrical properties of SBT thin films prepared by the MOD method. With increasing temperature, the crystallinity and the roughness of $IrO_2$films were also increasing. This increasing of roughness degraded the surface properties and electrical properties of SBT films. We found an optimum condition of $IrO_2$films as bottom electrode for ferroelectric capacitor at 50% oxygen ambient and $600^{\circ}C$ annealing temperature. Electrical characterizations were performed by using$ IrO_2$bottom electrodes grown at an optimum conditions. The remanent polarization ($P_{r}$) of the Pt/SBT/$IrO_2$/$SiO_2$/Si structure was 2.75 $\mu$C/$\textrm{cm}^2$ at an applied voltage of 3 V. The leakage current density was $1.06${\times}$10^{-3}$ A/$\textrm{cm}^2$ at an applied voltage of 3 V.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.27 no.2
• /
• pp.200-214
• /
• 1994

In order to clarify the benthic environmental properties as a part of a study on the macrobenthic community in the Chinhae Bay System, water temperature, salinity and dissolved oxygen (DO) in surface and bottom water layers, mean grain size (${\phi}$) and sediment organic carborn (SOC) in surface sediment were analyzed at twelve stations during the period from June 1987 to May 1990. A high sediment organic carbon and hypoxic condition in bottom water due to the development of summer stratification and fine sediment texture toward the inner bay were important environmental characteristics of Chinhae Bay. Hypoxic conditions began to develop in the inner bay from May, and gradually spread toward the outer bay in summer with a peak in September when half the bay was affected by this oxygen deficiency. Recovery from this hypoxic condition in the bottom layer was observed from the beginning of autumn together with a disappearance of the summer stratification. Principal component analyses were carried out from the following five environmental variables:mean water temperature, salinity, dissolved oxygen in the bottom layer and mean grain size, sediment organic carbon in surface sediment. The twelve stations were classified into four areal groups based on the analyses. The division of the areal groups had high correlations to the sediment organic carbon content.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.49 no.6
• /
• pp.849-855
• /
• 2016

The community composition and distribution of fish species in the middle of the Yellow Sea were investigated in summer from 2008 to 2014. A total of 72 demersal fish species from 46 families and 17 orders were collected. The most common species were Larimichthys polyactis, Engraulis japonicus, and Chaeturichthys hexane, which accounted for 72.0% of the total number of individuals while Liparis tanakai, Larimichthys polyactis, and Lophius litulon accounted for 67.8% of the total biomass. A cluster analysis based on the Bray-Curtis similarity revealed that the fish community fell into three groups, according to latitude. Principal Component Analysis (PCA) and correlation analysis showed that variation in bottom water temperature could act as an indicator of variation in community structure and abundance of the dominant species. Characteristics of fish communities, such as the number of species, the total number of individuals ($/km^2$), and biomass ($/km^2$), were highly correlated with bottom water temperature and depth.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.103-104
• /
• 2006

PRAM (Phase change Random Access Memory) is one of the most promising candidates for next generation Non-volatile Memories. The Phase change material has been researched in the field of optical data storage media. However, the characteristics required in solid state memory are quite different from optical ones. In this study, the reset current and temperature profile of PRAM cells with bottom electrode were calculated by the numerical method.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05b
• /
• pp.505-508
• /
• 2006

Self-leveling mortar is walkable bottom mortar which can maintain the horizontality of self fluid and have the the quick-setting quality, the low-human-effort practicable material of high-quality bottom in construction. In accordance with more adhesive strength with bottom side and absorption control, Primer is used for purpose to prevent pin-hole occurrence by self leveling mortar application prior to construction. This study is composed measurement of absorption, adhesive strength. Used material is NP-40 as nonionic emulsifying agent, uses SA-210L as negative ion emulsifying agent, uses APS, SBS as ridical initiator. A result of test, in accordance with image of Primer, as low temperature and application frequency, indicates low absorption rate and adhesive strength, as solid powder and dryness time is increse, absorption rate and adhesive strength lowly shows figure.