• 제목/요약/키워드: borehole survey

검색결과 123건 처리시간 0.021초

준설해사로 충진된 바닥보호공의 형상 및 침투유속평가 (Seepage Velocity and Borehole Image of Bottom Protection Layer Filled with Dredged Sand in Sea Dyke)

  • 오영인;강병윤;김기년;조영권
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2008년도 추계 학술발표회
    • /
    • pp.1727-1734
    • /
    • 2008
  • After the final closure of sea dyke, seepage behaviour of embankment is highly changed by variation of water head different between tide wave and controlled water level at fresh lake. Especially, the seepage behaviour of bottom protection layer of final closure section is more important factor for structural and functional stability of sea dyke, because of the bottom protection layer of final closure section is penetrated sea side to fresh lake. Even though bottom protection layer was filled with dredged fine sand, it has a high permeability. In this paper, mainly described about the seepage velocity and borehole image of bottom protection layer filled with dredged sand after final closure. Various in-situ tests such as BIPS (Borehole Image Processing System) and ABI (Acoustic Borehole Imager) survey, wave velocity measuring, and color tracer survey were conducted to evaluate the seepage behavior of bottom protection layer. Based on the in-situ tests, the bottom protection layer of final closure section was almost filled with dredged sand which is slightly coarse grain sand and there have sea water flow by water head different between tide wave and controlled water level at fresh lake. Also, comply with tracer survey results, the sea water flow path was not exist or generated in the bottom protection layer. However, because of this result not only short term survey but also just one test borehole survey results, additional long term and other borehole tests are needed.

  • PDF

원격탐사, 전기탐사, 전자기탐사 및 시추공영상의 융합적 분석을 통한 서산지역 방조제 누수구역 판별 (Investigation of Water Leakage in Seosan A-Region Sea Wall using Integrated Analysis of Remote Sensing, Electrical Resistivity Survey, Electromagnetic Survey, and Borehole Survey)

  • 홍성인;이동익;백광현;유영철;임국묵;유재형
    • 자원환경지질
    • /
    • 제46권2호
    • /
    • pp.105-121
    • /
    • 2013
  • 본 연구에서는 원격탐사, 전기비저항탐사, 전기전도도탐사(전자기탐사), 시추공 영상촬영법을 융합하여 효과적인 제방의 안정성 및 누수 평가 방법을 서산 A지구 방조제에 적용하여 제시하였다. Landsat ETM+열적외선 밴드를 사용하여 방조제 부근에서 다른 온도의 해수와 담수가 혼합되는 양상을 통해 누수의 존재, 규모 및 기간을 유추하였다. 전기비저항탐사를 방조제를 따라 실시하여 평균비저항 값 83.197 ${\Omega}$-m이하를 보이는 이상대의 수평적 수직적 분포를 확인하였다. 간조와 만조 시의 전기전도도 값의 분석을 통해 배경치의 영향을 최소화한 수평적 이상대 분포를 확인하였다. 시추공영상촬영을 통해 파쇄대의 수직적 분포양상과 기존 탐사법의 정확도를 확인하였다. 그 결과 전체 제방의 연장 중 41.7%에서 세 수평적 이상대 탐사법의 중첩구간이 확인되었으며, 시추공에서 확인된 수직적 파쇄양상을 고려할 때 누수구간이 제방단면의 중심부를 따라 상당부분 수평적으로 연장이 되어 방대한 양의 누수가 존재할 가능성이 높을 것으로 사료된다. 네 탐사법의 융합적 접근은 각 탐사방법이 가지고 있는 장점을 부각하고 단점을 보완하여 수평적 및 수직적인 누수구간과 기간의 확인 및 판별이 가능하고, 시추공에서 확인된 수직적 파쇄양상의 수평적 연장성을 예측하는데 높은 신뢰도를 보인다 할 수 있다.

Estimating aquifer location using deep neural network with electrical impedance tomography

  • Sharma, Sunam Kumar;Khambampati, Anil Kumar;Kim, Kyung Youn
    • 전기전자학회논문지
    • /
    • 제24권4호
    • /
    • pp.982-990
    • /
    • 2020
  • Groundwater is essential source of the freshwater. Groundwater is stored in the body of the rocks or sediments, called aquifer. Finding an aquifer is a very important part of the geophysical survey. The best method to find the aquifer is to make a borehole. Single borehole is not a suitable method if the aquifer is not located in the borehole drilled area. To overcome this problem, a cross borehole method is used. Using a cross borehole method, we can estimate aquifer location more precisely. Electrical impedance tomography is use to estimate the aquifer location inside the subsurface using the cross borehole method. Electrodes are placed inside each boreholes and area between these boreholes are analysed. An aquifer is a non-uniform structure with complex shape which can represented by the truncated Fourier series. Deep neural network is evaluated as an inverse problem solver for estimating the aquifer boundary coefficients.

Borehole radar survey to explore limestone cavities for the construction of a highway bridge

  • Kim Jung-Ho;Cho Seong-Jun;Yi Myeong-Jong
    • 지구물리와물리탐사
    • /
    • 제7권1호
    • /
    • pp.80-87
    • /
    • 2004
  • During excavation work for the construction of a highway bridge in a limestone area in Korea, several cavities were found, and construction work was stopped temporarily. Cavities under the bridge piers might seriously threaten the safety of the planned bridge, because they could lead to excessive subsidence and differential settlement of the pier foundations. In order to establish a method for reinforcement of the pier foundations, borehole radar reflection and tomography surveys were carried out, to locate cavities under the planned pier locations and to determine their sizes where they exist. Since travel time data from the crosshole radar survey showed anisotropy, we applied an anisotropic tomography inversion algorithm assuming heterogeneous elliptic anisotropy, in order to reconstruct three kinds of tomograms: tomograms of maximum and minimum velocities, and of the direction of the symmetry axis. The distribution of maximum velocity matched core logging results better than that of the minimum velocity. The degree of anisotropy, defined by the normalized difference between maximum and minimum velocities, was helpful in deciding whether an anomalous zone in a tomogram was a cavity or not. By careful examination of borehole radar reflection and tomography images, the spatial distributions of cavities were delineated, and most of them were interpreted as being filled with clay and/or water. All the interpretation results implied that two faults imaged clearly by a DC resistivity survey were among the most important factors controlling the groundwater movement in the survey area, and therefore were closely related to the development of cavities. The method of reinforcement of the pier foundations was based on the interpretation results, and the results were confirmed when construction work was resumed.

Feasibility test on EDZ detection by using borehole radar survey

  • 조성준;김정호;손정술;김창렬;성낙훈
    • 한국지구물리탐사학회:학술대회논문집
    • /
    • 한국지구물리탐사학회 2006년도 공동학술대회 논문집
    • /
    • pp.239-244
    • /
    • 2006
  • 현재 건설중인 한국원자력 연구소 내의 지하 처분 연구시설에서 발파에 의한 터널 굴착 중 발생하는 손상대를 모니터링 하기 위해 시추공 레이다 반사법 탐사를 수행하였다. 60m 길이의 진입 터널이 완성되고 끝단에 쉘터가 만들어진 뒤 쉘터로부터 길이 35 m의 수평 시추공을 뚫어 터널 굴착에 따른 손상대 모니터링을 위한 관측공으로 사용하였다. 시추공은 굴착터널로부터 5.5 m 떨어져 있으며, $2{\sim}4$일 간격으로 5회 실험을 실시하였다. 터널의 굴착에 따른 터널면에서의 반사가 가장 강력한 반사면으로 작용하였으며, 서로 다른 날짜의 자료의 비교를 통해 터널 굴착면에 인접한 반사면의 변화를 감지 하였으며 이는 균열대의 생성과 암반 강도의 저하에 의한 것으로 여겨 졌으며 손상대로 평가되었다.

  • PDF

시추공 레이다 탐사에 의한 지하 터널 탐지 적용성 연구 (Application of Borehole Radar to Tunnel Detection)

  • 조성준;김정호;김창렬;손정술;성낙훈
    • 지구물리와물리탐사
    • /
    • 제9권4호
    • /
    • pp.279-290
    • /
    • 2006
  • 이 연구에서는 다양한 시추공 레이다 탐사법 중, 지하 갱도의 탐지에 사용이 가능한 (1) 시추공 레이다 반사법 탐사, (2) 방향성 안테나를 이용한 반사법 탐사, (3) 크로스홀 스캐닝(crosshole scanning), (4) 레이다 토모그래피 등의 4 종류 시추공 레이다 탐사법의 터널 탐지에 대한 적용성과 한계성을 탐사 사례 분석을 통해 고찰하였다. 시추공 레이다 반사법 탐사의 터널로부터 회절 양상은 완벽한 포물선 형태보다는 상부 포물선만 명확히 나타난 형태가 많았고 그 회절 이벤트는 정점을 기준으로 아래, 위 10 m 이상에 이르는 트레이스 까지 나타났다. 또한 안테나의 길이에 비해 시추공의 공경이 커지면 링잉 현상이 많이 발생함을 확인하였다. 송 수신 거리(offset)에 따라 신호의 양상이 많이 달라지며 현장여건에 따라 송 수신 거리를 조절하면 더 좋은 분해능의 자료를 획득할 수 있을 것이다. 방향성 안테나 시스템은 한 시추공만을 이용하여 터널의 3차원적인 위치를 정확히 판별할 수 있는 장점이 있으나 장비의 가격이 고가이며, 현장 작업의 난이도가 매우 높고, 시간이 많이 걸리는 단점이 있다. 크로스홀 스캐닝는 터널의 유무에 대한 좋은 지표가 될 수 있음을 알 수 있었으며 시추공 레이다 반사법 탐사와 같이 사용된다면 높은 신뢰도의 결과를 낼 수 있을 것이다. 레이다 토모그래피는 터널을 영상화함과 동시에 주변의 지반 물성을 얻게 되어 지하구조 파악에 효과적이라고 할 수 있다. 위의 결과를 토대로 경제적이고 효과적인 터널 탐지 방법을 제안하면, 먼저 시추공 레이다 반사법 탐사를 수행하여 이상 징후를 탐지 한 후, 주변의 시추공 상황에 따라 크로스홀 스캐닝이나 방향탐지 안테나를 도입하여 확인하는 것이다.

시추공 공곡 측정의 원리 - 좌표계 변환의 응용 (Tutorial on the Principle of Borehole Deviation Survey - An Application of the Coordinate Transforms)

  • 송윤호
    • 지구물리와물리탐사
    • /
    • 제23권4호
    • /
    • pp.243-252
    • /
    • 2020
  • 이 논문에서는 시추공을 이용한 탐사나 자료 해석 시에 중요한 시추공 궤적 정보 획득 방법에 대한 이해를 공유하고자, 깊이에 따른 시추공의 좌표를 구하는 시추공 공곡 측정 문제를 좌표계 변환 공식에 기초하여 수학적으로 정리하였다. 먼저, 철재 케이싱이 설치되어 있지 않은 시추공에 적용 가능한 방법으로서 3성분 가속도계와 3성분 자력계를 함께 이용하여 시추공의 방위각, 편차각 그리고 센서회전각을 구하는 원리를 정리하였다. 다음으로, 철재 케이싱이 설치되어 있을 경우에 자이로스코프에서 3성분 각속도가 측정되었을 때, 좌표계 변환 행렬의 시간 미분 관계식에 기초해 각속도의 시간에 따른 적분을 통해 요-피치-롤 각을 구하는 수학적 이론을 정리하고 지구 자전의 영향을 제거함으로써 측정자료의 시간 적분에 의해 시추공의 궤적을 구하는 방법을 설명하였다. 오차가 포함된 측정 자료로부터 시추공 공곡 결정의 정확도를 높이는 중요한 방법으로 센서 또는 측정 자료를 융합하는 원리도 예를 들어 설명하였다. 시추공 공곡 측정원리는 GPS 수신이 불가능한 터널내에서의 궤적 추적 또는 무인비행체를 이용한 공중 탐사나 항공 탐사 시 센서의 자세 측정에도 활용될 수 있다. 또한, 센서의 융합에서 필수적으로 접목되어야 할 최적화 필터에 대해서도 중요 문헌 및 사례를 소개함으로써, 앞으로의 연구에 도움을 주고자 하였다.

3D 가시화를 이용한 지반침하지역의 시추자료와 토모그래피 자료의 비교 (Comparison of the borehole and tomography data in subsidence area using 3D visualization)

  • 안조범;윤왕중;김진회
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2002년도 가을 학술발표회 논문집
    • /
    • pp.231-236
    • /
    • 2002
  • The understanding of underground geologic structures is of great importance for the surface and subsurface constructions, prevention of natural hazards such as land-slides and subsidence, and many other areas. To get the information on the geologic conditions, many of investigations such as geologic survey, geophysical explorations, testings on the physical properties of rocks, drilling tests and logging, and groundwater surveys are usually conducted, and tremendous data are collected accordingly. In general, however, these huge amount of data are interpreted in the individual areas only. If these data are analyzed collectively, much more information on the geologic conditions can be obtained. In this study, 3D visualization of borehole logging data is attempted. Borehole logging data are obtained at the urban subsidence area. To compare the 3D logging data with other geologic and geophysical data such as resistivity tomography data, interface module was developed. The 3D visualization of logging data and the comparison with other data can be helpful for the understanding of underground geologic structures.

  • PDF

폐광산 지역의 공동 탐지 및 지반침하 모니터링을 위한 전기비저항탐사와 시추공영상촬영기법 적용 사례 (A Case Study of Electrical Resistivity and Borehole Imaging Methods for Detecting Underground Cavities and Monitoring Ground Subsidence at Abandoned Underground Mines)

  • 최정열;김승섭;박상규;신광수;강병천
    • 한국지구과학회지
    • /
    • 제34권3호
    • /
    • pp.195-208
    • /
    • 2013
  • 지하 폐광도에 의한 지반침하 지역에서 전기비저항탐사와 시추공영상촬영을 통하여 지하공동의 분포 파악 및 지반 침하의 시간에 따른 변화량 측정을 수행하였다. 전기비저항탐사가 가능했던 연구지역 1에서는 100-150 ohm-meter 정도 낮은 비저항을 가지는 이상대가 관찰되었으며 시추조사와 시추공영상촬영 결과에서 폐갱도를 확인하였다. 연구지역 2는 도로로 피복되어 전기비저항탐사 수행이 불가능하였으나 광맥분포를 고려한 시추조사에서 채굴적 및 폐갱도를 확인하였다. 또한 시추공영상촬영을 43일간 총 6차례에 걸쳐 수행하여 시간에 따른 지하매질의 수직 이동 변위를 측정하였다. 지반침하로 인한 지하매질의 수직이동양상은 하부에서 상부보다 3배 이상 큰 규모로 발생하며 그 지속기간 역시 4배 이상 오랫동안 발생했음을 확인하였다. 효과적인 지하공동 탐지 및 지반침하 작용 모니터링을 위해서는 전기비저항탐사와 시추공영상촬영기법을 활용하는 것이 유용함을 알 수 있었다.

화강암 석산 지역에서의 레이다 탐사의 적용 (Application of Radar Survey to a Granite Quarry Mine)

  • 설순지;김정호;조성준;이명종;정승환
    • 지구물리와물리탐사
    • /
    • 제4권1호
    • /
    • pp.8-18
    • /
    • 2001
  • 파쇄대와 같은 불균질대의 분포 및 위치를 영상화하고 암석의 신선도를 평가하기 위하여, 화강암 석산 지역에서 시추공을 이용한 레이다 반사법 및 토모그래피 탐사와 지표 탐사인 GPR탐사를 실시하였다. 또한 레이다 반사법 탐사에서 나타난 반사면의 공간적 방향성을 알기 위해서 방향탐지 안테나도 적용시켰다. 모든 시추공 레이다 탐사에는 20MHz를 주주파수로 갖는 안테나를, GPR탐사에는 100MHz를 사용하였다. 시추공 반사법, 방향탐지 안테나 및 GPR탐사 영상들은 서로 잘 일치하는 탐사 결과를 보여주었으며, 탐사지역내의 주요 파쇄대의 3차원적인 위치 및 주향 방향을 알려주었다. 일부 구간의 토모그래피 초동 시각 곡선에서는 화강암 지역에서는 일반적으로 나타나기 어려운 이방성을 보였는데 이러한 이방성은 텔레뷰어 자료와 비교하여 본 결과 동일 방향으로 정렬되어 있는 미세 균열과 연관된 것으로 추정된다. 또한 이 지역은 시추공 레이다, 토모그래피, GPR 영상들 및 이방성의 분포로부터 MF2및 MF5로 명명된 두개의 주 파쇄대에 둘러싸인 지역이 비교적 신선한 암석으로 구성되어 있음을 확인하였다.

  • PDF