• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.521-532
• /
• 2008

The SIP method developed by low noise-vibration from Japan is appropriate to the construction at urban area. However, this method has been misused as a pre-driiled driven pile method in Korea. Hence, Korea Expressway Corporation proposed 'Design & Construction Guideline for the SIP Method' following the original concept of the SIP method at 2004 and 2006. Also construction guideline of another auger-drilled piles were introduced.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 추계 학술발표회
• /
• pp.539-550
• /
• 2006

New Songdo city is currently developing on the reclaimed land on a marine deposit and among the development the four sixty-four(64) stories high rise buildings are under construction at block 125. The ground condition of the site is comprised of a deep seated weathered rock staratum under a soft marine deposit layer. As a foundation system, a bored pile was planned to transmit the applied load to the stable layer. In this study, the behavior of the weathered rock especially locating at a upper part having a weak strength(HWR, MWR) has been evaluated through series of hi-directional pile load test(BD PLT) carried out on the 3 drilled shafts socketed in a weathered rock layer in a design stage. It has been planned to increase the effect of the tests that the length of test piles was prepared short enough to perform the test under a high stress. The summary of the design reflecting the test results has been made up. In addition, the 4 hi-directional pile tests excuted on the working piles during the construction stage for the purpose of confirmation and the evaluation of the adequacy of the pile behaviors have been included in this study.

• Geomechanics and Engineering
• /
• 제34권4호
• /
• pp.397-408
• /
• 2023

Pipe pile walls are commonly used as retaining structures for excavation projects, particularly in densely populated coastal cities such as Hong Kong. Pipe pile walls are preferred in reclaimed land due to their cost-effectiveness and convenience for installation. However, the pre-bored piling techniques used to install pipe piles can cause significant ground disturbance, posing risks to nearby sensitive structures. This study reports a well-documented case history in a reclamation site, and it was found that pipe piling could induce ground settlement of up to 100 mm. Statutory design submissions in Hong Kong typically specify a ground settlement alarm level of 10 mm, which is significantly lower than the actual settlement observed in this study. In addition, lateral soil movement of approximately 70 mm was detected in the marine deposit. The lateral soil displacement in the marine deposit was found to be up to 3.4 and 3.1 times that of sand fill and CDG, respectively, mainly due to the relatively low stiffness of the marine deposit. Based on the monitoring data and site-investigation data, a 3D numerical analysis was established to back-analyze soil movements due to the installation of the pipe pile wall. The comparison between measured and computed results indicates that the equivalent ground loss ratio is 20%, 40%, and 20% for the fill, marine deposit and CDG, respectively. The maximum ground settlement increases with an increase in the ground loss ratio of the marine deposit, whereas the associated influence radius remains stationary at 1.2 times the pipe pile wall depth (H). The maximum ground settlement increases rapidly when the thickness of marine deposit is less than 0.32H, particularly for the ground loss ratio of larger than 40%. This study provides new insights into the pipe piling construction in reclamation sites.

• 토지주택연구
• /
• 제11권2호
• /
• pp.75-86
• /
• 2020

As the urban regeneration project and the old housing maintenance project are actively progressing in Korea, small-scale building construction is being carried out in downtown areas. Small buildings in the downtown area are constructed on about 4 to 10 floors, and since they are carried out in small units in residential areas, it is difficult to enter large equipment to construct existing piles, and it is more vulnerable to complaints about noise and vibration. in this study, helical piles suitable for urban areas or small sites where it is difficult to enter large equipment, such as noise and vibration. Reliability analysis was performed on the results of the static load tests and dynamic load tests conducted at the LH site and the bearing capacity calculated by the hydrostatic method and the empirical formula (N value). As a result of comparing and analyzing the design formula and the results of static load test and dynamic load tests, the correlation between the design formula of the bored pile (Road bridge design standard) formula using N value and the design formula by the modified Davisson method frequently used by method commonly European helical file practitioners.

• 한국지반공학회지:지반
• /
• 제5권3호
• /
• pp.29-38
• /
• 1989

도시내 지하굴착공사에 저진동, 저소음의 장점이 있어 많이 사용될 수 있는 주열식 흙막이벽편 말뚝의 설계법이 제안되며, 그 실용성이 설계례를 통하여 검토된다. 먼저 점성토지반 속에 설치된 주렬식 흙막이말뚝의 저항력 산정식이 굴착 저면을 기준으로 상부와 하부지반에 대하여 각카 제시 된다. 이 산정식의 특징은 지반특성과 말뚝의 설치간격을 합리적으로 고려할 수 있자는 점이다. 이 저항력 산정식을 활용하여 흙막이 말뚝의 안정해절법이 확립된다. 흙막이 말뚝의 설계는 말뚝의 안 정성과 지반의 안정성을 동시에 만족시키는 범위에서 책시되며, 지반의 안정성 검토시에는 굴착 저 부에서의 정토지반 융기현상에 대한 안전검토도 실시된다.

• 한국안전학회지
• /
• 제35권3호
• /
• pp.58-63
• /
• 2020

At the construction site of the driving site, the pile rebound and penetration measurements are performed manually to determine the end point of the driving operation, thereby causing the measurer to be exposed to a death accident. In this study, in order to eliminate the risk of this work, a non-contact penetration measuring device was developed and usability evaluation was conducted. The penetration measuring device is manufactured based on the ultrasonic sensor, and can be combined with the pile to deliver the data in real time, and the delivered data can be output in real time on the portable PC and the final penetration can be calculated. Usability evaluation on the device was conducted by comparison with manual work. Usability evaluation was largely evaluated on measured values, subjective comfort, and body parts comfort. The result of the measured value tended to overestimate the value measured manually by the measuring device, which is similar to the previous research. In terms of subjective comfort and body part comfort, overall satisfaction was higher than the manual method when using the measuring device. Taken together, these results indicate that it is possible to use the rudder measuring device in place of manual work in the construction site, and it is judged that the worker's comfort is greatly increased by using the measuring machine. The results of this study suggest that the use of non-contact measuring device in the field can be used as basic data to support them.

• 한국지반공학회논문집
• /
• 제25권4호
• /
• pp.77-90
• /
• 2009

본 연구에서는 다층지반에 관입된 현장타설말뚝 중 강성말뚝을 대상으로 다층지반의 조건에 따른 말뚝의 수평지지력과 수평거동에 대하여 실험적 분석을 실시하였다. 이를 위해 말뚝이 근입되는 지반에 상이한 상대밀도를 갖는 지반층을 구성하였으며, 수평하중-변위량 곡선을 통하여 극한수평지지력을 산정하고 기존의 방법을 적용시켜 산정된 극한수평지지력과 비교하였다. 또한, 말뚝에 부착된 스트레인게이지와 토압센서를 이용하여 다층지반에서의 말뚝의 수평거동에서 발생하는 휨모멘트분포와 극한단위수평지지력분포를 확인하였다. 수평재하시험결과 말뚝의 극한수평지지력은 지반의 상대밀도와 지반층의 구성에 따라 달라지며, 단일지반을 대상으로 제안된 다양한 방법으로 예측된 값에 비하여 상당부분 적게 측정되는 것으로 나타났다. 말뚝의 침모멘트 분포는 다층지반의 조건에 상관없이 유사한 분포 형상을 보였으며, 극한단위수평지지력 분포 형태는 최상층지반과 중간층지반이 동일하고 최하층지반이 상이한 지반에서 다소 달라지는 분포형상을 보였으나, 다른경우에 있어서는 기본적으로 Prasad and Chari(1999)의 극한단위수평지지력 분포형상과 유사한 것으로 나타났다.

• 한국지반공학회논문집
• /
• 제22권11호
• /
• pp.65-73
• /
• 2006

최근 신뢰성 이론에 바탕을 둔 한계상태설계법(Limit State Design)이 국제적으로 도입되고있는 추세이다. 이에 본 연구에서는 사질토 지반에 근입된 항타 및 현장타설 말뚝의 지지력 산정법에 대한 신뢰도지수와 안전율과의 관계를 규명하고자 하였다. 본 연구는 말뚝 직경의 10% 침하 시 지지력을 결정하는 방법(0.1B), Chin의 방법, De Beer의 방법과 Davisson의 방법에 대한 말뚝 지지력 산정결과를 비교 분석하였고, 말뚝의 지지력 산정 시 유용하게 활용되는 CPT결과를 통한 말뚝의 지지력 산정법 중에서 LCPC법에 의한 지지력과의 비교를 통해 FOSM법을 바탕으로 각 산정 법에 대한 신뢰도를 평가하였다 각 말뚝지지력 해석 방법에 따른 안전율과 신뢰도지수 관계 분석결과, 극한지지력을 규정하는 0.1B와 Chin의 방법에 대한 신뢰도지수가 De Beer와 Davisson에 의한 신뢰도지수보다 높은 것으로 나타났으며, 목표신뢰도지수 $2.0{\sim}2.5$를 기준으로 하여 항타 말뚝에서의 안전율 2는 방법에 따라 다소 증대될 필요가 있고, 현장 타설 말뚝에서는 극한 지지력 확인시 안전율 3보다 작게 적용할 수 있는 여지가 있음을 확인하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.591-604
• /
• 2008

In this study, two design examples of drilled shafts on soft ground in Ho-Chi-Minh City, Vietnam are introduced. One is for a 27-story apartment and the other is for a Arch bridge over Saigon river. Unlikely the normal cases in Korea, all of the bored pile foundations are supposed to be placed on soil layers. Therefore, skin friction between pile and ground is the most crucial design parameter. Three methods using SPT N value of sandy soil -Korean Road Bridge Code(1996), Reese and Wright (1977), and O'Neill and Reese (1988)- were adopted to obtain an ultimate axial bearing capacity. In order to verify the calculated bearing capacity, 3 sets of static load test and a Osterberg Cell test were performed at an apartment site and a bridge site respectively. LRFD (Load Resistance Factored Design) method was compared with ASD (Allowable Stress Design) method. On application of ASD method, safety factor for skin friction was adopted as 2 or 3 while safety factor for end bearing was 3. The design bearing capacities from ASD method matched well with those from LRFD method when safety factor for skin friction was adopted as 2.

• 한국지반환경공학회 논문집
• /
• 제14권3호
• /
• pp.41-49
• /
• 2013

회전관입형 말뚝은 말뚝설치 시 주변 흙의 변위가 발생하는 변위 말뚝으로 큰 지지력 및 인발력을 발휘할 수 있다. 또한 비배토 공법으로 슬라임이 발생하지 않고 시공 중 소음, 진동이 작아 환경친화적인 특성이 있어 외국의 경우 적용사례가 증가하고 있다. 하지만 대부분의 말뚝을 직접적으로 항타하는 항타말뚝, 선굴착 후 기 제작된 말뚝을 지중에 매입하는 매입말뚝이 주로 적용되고 있으며 회전관입형 말뚝의 사용은 제한적으로 이루어지고 있다. 지금까지 실시된 대부분의 실내시험에서는 말뚝을 설치한 후 지반을 조성하여 지지거동을 평가함에 따라 회전관입형 말뚝의 회전관입과정으로 인한 지지거동의 규명은 미흡한 실정이다. 이에 본 연구에서는 풍화토를 대상으로 회전관입과정을 모사한 실내실험을 실시하여 풍화토에 대한 지지력 거동을 평가하고자 하였으며, 더불어 나선형 판의 직경, 나선형 판의 간격, 나선형판의 개수, 나선형 판의 제원 등을 변화시켜가며 지지 거동을 평가하였다. 연구결과를 통하여 나선형 강관말뚝의 지지력 평가 결과 및 주요 제원에 따른 지지력 변화와 기존이론과의 비교분석 결과를 제시하였다.