DOI QR코드

DOI QR Code

다층지반에 관입된 강성말뚝의 수평 거동 및 수평 지지력 특성

The Behavior and Capacity of Lateral Loaded Rigid Pile Characteristics in Multi-layered Soil Conditions

  • 경두현 (연세대학교 토목공학과) ;
  • 강병준 (연세대학교 토목공학과) ;
  • 홍정무 (연세대학교 토목공학과) ;
  • 이준환 (연세대학교 토목공학과)
  • 발행 : 2009.04.30

초록

본 연구에서는 다층지반에 관입된 현장타설말뚝 중 강성말뚝을 대상으로 다층지반의 조건에 따른 말뚝의 수평지지력과 수평거동에 대하여 실험적 분석을 실시하였다. 이를 위해 말뚝이 근입되는 지반에 상이한 상대밀도를 갖는 지반층을 구성하였으며, 수평하중-변위량 곡선을 통하여 극한수평지지력을 산정하고 기존의 방법을 적용시켜 산정된 극한수평지지력과 비교하였다. 또한, 말뚝에 부착된 스트레인게이지와 토압센서를 이용하여 다층지반에서의 말뚝의 수평거동에서 발생하는 휨모멘트분포와 극한단위수평지지력분포를 확인하였다. 수평재하시험결과 말뚝의 극한수평지지력은 지반의 상대밀도와 지반층의 구성에 따라 달라지며, 단일지반을 대상으로 제안된 다양한 방법으로 예측된 값에 비하여 상당부분 적게 측정되는 것으로 나타났다. 말뚝의 침모멘트 분포는 다층지반의 조건에 상관없이 유사한 분포 형상을 보였으며, 극한단위수평지지력 분포 형태는 최상층지반과 중간층지반이 동일하고 최하층지반이 상이한 지반에서 다소 달라지는 분포형상을 보였으나, 다른경우에 있어서는 기본적으로 Prasad and Chari(1999)의 극한단위수평지지력 분포형상과 유사한 것으로 나타났다.

In this study, experimental analysis was performed about lateral load capacity and behavior of laterally loaded-bored rigid piles in muti-layered soil conditions. Lateral pile load tests were performed for muti-layerd soils consisting of different relative density. Ultimated lateral load capacities were measured from lateral load-displacement curves and compared with estimated values using theoretical methods. Bending moments and unit lateral capacity distribution of surrounding piles were measured from attached strain gauges and earth pressure sensors on the pile. It was found that ultimated lateral load capacities were different from the muti-layered soil conditions, and measured values were lower than estimated values. The bending moment distributions of the pile were similar all the time. Unit lateral capacity distributions were a little different from muti-layered soil conditions, but basically similar to the distribution proposed by Prasad and Chari (1999).

키워드

참고문헌

  1. Broms, B. (1964), "Lateral resistance of piles in cohesive soils", Journal of Geotechnica land Geoenvironmental Engineering, ASCE, Vol.90, No.4, pp.27-63
  2. El Naggar, M. H. and Wei, J. Q. (1998), "Response of tapered piles subjected to lateral loading", Canadian Geotechnical Journal, Vol.36, pp.52-71 https://doi.org/10.1139/cgj-36-1-52
  3. Fleming, W. G., Weltman A. J, Randolph, M. F., and Elson, W. K.(1992), "Piling Engineering", 2nd ed. John Wiley and Sons, Inc
  4. GAI Consultant Inc. (1982), "Laterally loaded drilled pier research Vol. 2", Research documentation GAI Report EL-2197, Research project 1280-1, California
  5. Haldar, A., Chari, T. R., and Prasad, Y. V. S. N. (1997), "Experimental and analytical investigation of directly embedded steel pole foundation", Canadian Electricity Association, Montreal, Que., Research report CEA384T971
  6. Haldar, A., Prasad, Y. V. S. N., and Chari, T. R. (2000), "Fullscale field tests on directly embedded steel pole foundation", Canadian Geotechnical Journal, Vol.37, pp.414-437 https://doi.org/10.1139/cgj-37-2-414
  7. Lee, J. H., Paik, K. H., Kim, D. H. (2008), "Estimation of ultimate lateral load capacity of piles in sands", Geotechnique (accepted)
  8. Meyerhof, G. G. Mathur, S. K., and Valsangkar, A. J. (1981), "Lateral resistance and deflection of rigid wall and piles in layered soils", Canadian Geotechnical Journal, Vol.18(2), pp.159-170 https://doi.org/10.1139/t81-021
  9. Petrasovits, G. and Award, A. (1972), "Ultimate lateral resistance of a rigid pile in cohesionless soil", Proc. of 5th European conf. on SMFE, Vol.3, pp.407-412
  10. Prasad, Y. V. S. and Chri, T. R. (1999), "Lateral capacity of model rigid piles in cohesionless soil", Soils and Foundations, Vol.39, No.2, pp.21-29 https://doi.org/10.3208/sandf.39.2_21
  11. Zhang, L., Silva, F., and Grismala, R. (2005), 'Ultimate lateral resistance to pile in cohesionless soils", Journal of Geotechnical and Geoenvironmental Eng., ASCE, Vol.131, No.1, pp.78-83 https://doi.org/10.1061/(ASCE)1090-0241(2005)131:1(78)
  12. Zhihong, H., McVay, M., Bloomquist, D., Herrera, R., and Lai, P. (2006), "Influence of torque on lateral capacity of drilled shafts in sands", Journal of Geotechnical and Geoenvironmental Eng. ASCE, Vol.132, No.4, pp.456-464 https://doi.org/10.1061/(ASCE)1090-0241(2006)132:4(456)