• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.3
• /
• pp.153-159
• /
• 2014

This research reviewed the joint and duration characteristics depending on the surface treatment condition and lap spliced length in the PET film jointing method using the high hardness liquid material. As a result, the corona discharge treatment was improved to the contact angle, joint tensile strength, and joint peel resistance compared to non-treatment. Particularly, a surface treatment E (Corona discharge + Primer + PU bond + Polyester fabric) turned out to the best, and especially when the lap spliced length is longer than 15mm, stable joint performance was secured under the long term deterioration treatment of 16 weeks. Thus, the joint is considered to be applicable as the water-proof material.

• Journal of the Korean Ceramic Society
• /
• v.42 no.12 s.283
• /
• pp.800-807
• /
• 2005

Cathode material, $(Ba_{0.5}Sr_{0.5})_{0.99}Co_{0.8}Fe_{0.2}O_{3-\delta}$, for low temperature SOFC was prepared by the Glycine-Nitrate synthesis Process (GNP). Characteristics of the synthesized powders were studied with controlling the pH of a precursor solution. Highly acidic precursor solution increased a perovskite forming temperature. It is considered that Ba and Sr cannot complex by carboxylic acid group of glycine, because under highly acidic condition the caboxylic group mainly combined with H+ insead of alkaline earth cations. A lack of bond between cations and glycine resulted in selective precipitation of the elements during evaporation of the precursor solution. In case of using precursor solution with pH %2\~3$, a single perovskite phase was obtained at $1000^{\circ}C$. Polarization resistance of $(Ba_{0.5}Sr_{0.5})_{0.99}Co_{0.8}Fe_{0.2}O_{3-\delta}$ was measured by AC impedance spectroscopy from the two electrode symmetric cell. Area specific resistance of the $(Ba_{0.5}Sr_{0.5})_{0.99}Co_{0.8}Fe_{0.2}O_{3-\delta}$ air electrode at $500^{\circ}C\;and\;600^{\circ}C$ were $0.96{\Omega}{\cdot}cm^2\;and\;0.16{\Omega}{\cdot}cm^2$, respectively.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.04a
• /
• pp.208-211
• /
• 2007

Separation Devices have two functions. These two functions are to bond and to separate two bodies. This paper is about separation devices which use explosives to separate their bodies. Explosive bolt is separated with two bodies when the explosives in the body detonated. The good things of explosive bolt are that it has simple operational system and it is made of few parts. But it has side effects; fragment and pyre-shock. To avoid these side effects gas expansion separation(GES) bolt and pressure cartridge actuation separation(PAS) devices are invented. These use pressure to separate their bodies. The pressure is generated when explosives are burned. But the sizes of PAS devices are bigger than explosive bolts. And GES bolt has a mechanically lower bonding ability than that of explosive bolt. When you design separation devices, it is recommended to know operational system and characteristics of separation devices, to design best one.

• The Journal of the Korea Contents Association
• /
• v.19 no.12
• /
• pp.184-192
• /
• 2019

In the domestic cosmetics market, it is important to secure high customer loyalty in order to stably enter the market. To do this, customers should have a deep sense of trust and bond through the authenticity of the brand. At this time, among the components of brand authenticity, only corporate authenticity has a positive effect on customer brand attachment and loyalty. This paper suggests marketing strategies based on CSR activities that can most effectively show corporate authenticity. First, only cases where the activity was continued for more than one year and the activity contents and results were clear and recognized for authenticity were selected. Twenty cosmetic brands met this condition and 28 CSR activities which conducted by the brand are analyzed. The characteristics of each area were derived by dividing it into four areas of desirable society presented by the EU, and a marketing strategy for each type was presented. This research will be of practical help in conducting CSR activities later in the enterprise.

• Journal of Powder Materials
• /
• v.13 no.1 s.54
• /
• pp.62-67
• /
• 2006

Friction welding of $Al_2O_3$ particulate reinforced aluminum composites was performed and the following conclusions were drawn from the study of interfacial bonding characteristics and the relationship between experimental parameters of friction welding and interfacial bond strength. Highest bonded joint efficiency (HBJE) approaching $100\%$ was obtained from the post-brake timing, indicating that the bonding strength of the joint is close to that of the base material. For the pre-brake timing, HBJE was $65\%$. Most region of the bonded interface obtained from post-brake timing exhibited similar microstructure with the matrix or with very thin, fine-grained $Al_2O_3$ layer. This was attributed to the fact that the fine-grained $Al_2O_3$ layer forming at the bonding interface was drawn out circumferentially in this process. Joint efficiency of post-brake timing was always higher than that of pre-brake timing regardless of rotation speed employed. In order to guarantee the performance of friction welded joint similar to the efficiency of matrix, it is necessary to push out the fine-grained $Al_2O_3$ layer forming at the bonding interface circumferentially. As a result, microstructure of the bonded joint similar to that of the matrix with very thin, fine-grained $Al_2O_3$ layer can be obtained.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.18 no.4
• /
• pp.201-212
• /
• 2014

The plastic hinge region of RC pier ensures its nonlinear behavior during strong earthquake events. It is assumed that the piers secure sufficient strength and ductility in order to prevent the collapse of the bridge during strong earthquake. However, the presence of a lap-splice of longitudinal bars in the plastic hinge region may lead to the occurrence of early bond failure in the lap-splice zone and result in significant loss of the seismic performance. The current regulations for seismic performance evaluation limit the ultimate strain and displacement ductility considering the eventual presence of lap-splice, but do not consider the lap-splice length. In this study, seismic performance test and analysis are performed according to the cross-sectional size and the lap-splice length in the case of longitudinal bars with lap-splice located in the plastic hinge region of existing RC bridge columns with circular cross-section. The seismic behavioral characteristics of the piers are also analyzed. Based upon the results, this paper presents a more reasonable seismic performance evaluation method considering the lap-splice length and the cross-sectional size of the column.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.4
• /
• pp.508-514
• /
• 2006

In this study, we have performed ab initio computer simulations to investigate the conformational and complexation characteristics of the trimethyl ether of p-tert-butylmonodeoxycalix[4]arene (6) with a potassium ion. The structures of different conformers of 6 and their potassium complexes were optimized by using ab initio RHF/6-31G and B3LYP/6-31G(d,p) methods. The relative stability of the various conformers of the uncomplexed 6 is in following order: cone (most stable) > 1-partial-cone ~ 2i-partial-cone > 2-partial-cone ~ 1,3-alternate > 3i-partial-cone. However, the relative stability of the conformational complexes of 6 with $K^+$ is in the following order: 2-partial cone ~ 1,3-alternate > cone > 3-partial cone > 1-partial cone (least stable). The highest binding strengths of 2-partial-cone and 1,3-alternate complexes originate from two strong cation-$\pi$ interactions and two strong cation-oxygen interactions in the complex of 6+$K^+$. Due to the cation-$\pi$ interactions, the calculated C-C bond distances in the arenes of the $K^+$-complexes are about 0.0048 $\AA$ longer than the values of their isolated hosts.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.609-612
• /
• 2008

Ultra Super Early Strength Cement is a material that satisfies these requirements. early hydration heat however, is significant over regular concrete, thus discretion is advised for thermal cracks in accordance with heat generation when constructing a large-scale structures. In addition, the negative point that it is difficult to achieve required strength in a short period of time following rubbing process while retaining workability, the cement is being used conditionally for engineering material and Ultra Super Early Strength Cement for maintenance material for construction doesn't exist. Magnesia Phosphate Cement, which is currently under studies in overseas uses no extra admixture and has strong points of Ultra Super Early Strength as well as favorable construction-ability and adhesive stability to the prototype concrete. These factors stem recognition that it could be used as maintenance material for construction of diverse applicability. In order to provide necessary data to increase practicality of the magnesia phosphate cement for Ultra Super Early Strength Mortar, the study carried out simulate experiment on member of framework to review field applicability.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.6
• /
• pp.27-31
• /
• 2012

This study was designed to examine the feasibility of functionalized mesoporous silica as the adsorbent for benzene, toluene, ethylbenzene, and xylene isomers (BTEX) in groundwater. p-Xylene was used as the model compound of BTEX. A series of functionalized mesoporous silica with MCM-41 type of structure was synthesized using a co-condensation method. Monoamine, triamine, nitrile, phenyl, and octyl groups were functionalized to the mesoporous silica structure. Adsorption sites for p-Xylene in a functionalized mesoporous silica were Si-O-Si covalent bond, the surfactant, and the functional group. Octyl-functionalized mesoporous silica with stearyltrimethylammonium chloride as a surfactant showed the highest adsorption ability. The maximum xylene adsorption capacity of the octyl-functionalized mesoporous silica with stearyltrimethylammonium chloride based on Langmuir model was 4.17 mmol/g on $20^{\circ}C$, which was 2.9 times higher than that of MCM-41.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.141-144
• /
• 2008

Deflection in terms of serviceability of reinforced concrete structures is considered as one of significant factor. Domestic concrete specification offers a procedure to evaluate deflection using effective moment of inertia at cracked section, which has been known as Branson's equation in ACI. Branson's equation was derived from statistical analysis of maximum deflection of flexural members, but is somewhat weak in no reflection of bond characteristics between reinforced bars and concrete, such as tension stiffening effect. Therefore, present code creates difference from actual deflection. In this study, experiments about deflection of RC beams was completed to compare domestic standard and Eurocode 2, which calculates deflection considering tension stiffening effect. Four RC beams were built and tested, and initial modulus of elasticity and tensile strength of concrete used in the test was calculated by each design standard.