• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2017년도 추계학술대회
• /
• pp.425-428
• /
• 2017

본 논문에서는 진동 에너지를 이용하여 에너지를 수확하는 전파 정류 하베스팅 회로를 설계하였다. 설계된 회로는 저전압에서도 전력효율이 우수하도록 Beta-Multiplier를 이용하여 Body-Bias technique을 Negative Voltage Converter에 적용하였으며, Comparator를 Bulk-Driven type으로 설계하였다. 제안된 회로는 $0.35{\mu}m$ CMOS 공정으로 설계하였으며, 설계된 회로의 칩 면적은 $931{\mu}m{\times}785{\mu}m$이다.

• 전기전자학회논문지
• /
• 제17권2호
• /
• pp.214-220
• /
• 2013

본 논문에서는 패스 트랜지스터에 바디 구동 기술을 적용하여 면적을 감소시킨 LDO (Low drop-out) 레귤레이터를 제안하였다. 바디 구동 기술은 트랜지스터의 문턱전압 (Vth)을 감소시켜 드레인 전류를 증가시켜 전류 구동 능력을 향상시킨다. 본 논문에서는 LDO 레귤레이터의 패스 트랜지스터에 바디 구동 기술을 적용하여 면적을 감소시키고, 기존 LDO 레귤레이터와 동일한 성능을 유지하였다. 본 논문에서 제안하는 패스 트랜지스터는 동일한 성능 대비 면적은 5.5 % 감소 하였다. 본 논문에서 제안하는 LDO 레귤레이터는 2.7 V ~ 4.5 V의 입력 전압, 1.2 V ~ 3.3 V의 출력전압 범위를 가지며, 150 mA의 출력 전류를 공급한다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 추계학술대회
• /
• pp.533-536
• /
• 2016

본 논문에서는 진동 에너지를 이용한 MPPT 제어기능을 갖는 에너지 하베스팅 회로를 설계하였다. Body-bias technique과 bulk-driven technique을 이용하여 저전압에서도 높은 효율특성을 갖는 고성능 AC-DC 변환기를 제안하고 진동에너지 하베스팅 회로 설계에 적용하였다. MPPT (Maximum Power Point Tracking) 제어는 진동소자의 개방회로전압과 MPP 전압간의 관계를 이용하였으며, 진동소자의 개방회로전압을 주기적으로 샘플링 함으로써 이를 이용해 MPPT 기준전압을 생성하고, 이를 기준으로 부하로의 에너지 공급을 제어한다. $0.35{\mu}m$ CMOS 공정으로 설계된 회로의 칩 면적은 $1.21mm{\times}0.98mm$이다.

• Journal of Mechanical Science and Technology
• /
• 제15권8호
• /
• pp.1188-1195
• /
• 2001

A numerical analysis has been carried out to investigate the influences of thermosolutal convection on the heat and mass transfer and solute segregation in crystals grown by the vertical Bridgman technique. The governing equations are solved by a finite-volume method using the power law scheme and the SIMPLE algorithm in which body-fitted coordinate system has been used. A primary convective cell driven by thermal gradients forms in the bulk of the domain, while a secondary convective cell driven by solutal gradients forms near interface. As the solutal Rayleigh number increases, secondary cell becomes to be stronger and has a great influence on the radial concentration along the interface.

• 대한조선학회논문집
• /
• 제58권3호
• /
• pp.158-166
• /
• 2021

In this paper, a numerical analysis technique using a body force model is investigated to estimate the available net thrust of multi-pod-driven ice-breaking vessels under bollard pull and overload conditions. To employ the body force model in present flow simulations, drag and thrust components acting on the pod unit are calculated by using Propeller Open Water (POW) test data. The available net thrusts according to the direction of operation are evaluated in both bollard pull and overload conditions under deep water. The simulation results are compared with the model test data. The available net thrusts, calculated by the present analysis for ahead operating modes at 3~6 knots which are typical speeds of the target vessel in arctic field, are agreed well with the model test results. It is also found that the present result for astern operating mode appears approximately 6 % larger than the model test result. In addition, the available net thrusts are calculated under the both operating conditions accompanied by shallow water effects, and the main cause of the difference is studied. Based on the result of the present study, it is confirmed that the body force model can be applied to the performance evaluation of multi-pod propulsion system and the main engine selection in early design stage of the vessel.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1998년도 춘계 학술대회논문집
• /
• pp.15-28
• /
• 1998

As an alternative for solving the incompressible Navier-Stokes equations, we present a vorticity-based integro-differential formulation for vorticity, velocity and pressure variables. One of the most difficult problems encountered in the vorticity-based methods is the introduction of the proper value-value of vorticity or vorticity flux at the solid surface. A practical computational technique toward solving this problem is presented in connection with the coupling between the vorticity and the pressure boundary conditions. Numerical schemes based on an iterative procedure are employed to solve the governing equations with the boundary conditions for the three variables. A finite volume method is implemented to integrate the vorticity transport equation with the dynamic vorticity boundary condition . The velocity field is obtained by using the Biot-Savart integral derived from the mathematical vector identity. Green's scalar identity is used to solve the total pressure in an integral approach similar to the surface panel methods which have been well-established for potential flow analysis. The calculated results with the present mettled for two test problems are compared with data from the literature in order for its validation. The first test problem is one for the two-dimensional square cavity flow driven by shear on the top lid. Two cases are considered here: (i) one driven both by the specified non-uniform shear on the top lid and by the specified body forces acting through the cavity region, for which we find the exact solution, and (ii) one of the classical type (i.e., driven only by uniform shear). Secondly, the present mettled is applied to deal with the early development of the flow around an impulsively started circular cylinder.

• Computers and Concrete
• /
• 제32권2호
• /
• pp.217-232
• /
• 2023

Numerous studies have been performed on the behavior of pile foundations in cold regions. This study first attempted to employ artificial neural networks (ANN) to predict pile-bearing capacity focusing on pile data recorded primarily on cold regions. As the ANN technique has disadvantages such as finding global minima or slower convergence rates, this study in the second phase deals with the development of an ANN-based predictive model improved with an Elephant herding optimizer (EHO), Dragonfly Algorithm (DA), Genetic Algorithm (GA), and Evolution Strategy (ES) methods for predicting the piles' bearing capacity. The network inputs included the pile geometrical features, pile area (m²), pile length (m), internal friction angle along the pile body and pile tip (Ø°), and effective vertical stress. The MLP model pile's output was the ultimate bearing capacity. A sensitivity analysis was performed to determine the optimum parameters to select the best predictive model. A trial-and-error technique was also used to find the optimum network architecture and the number of hidden nodes. According to the results, there is a good consistency between the pile-bearing DA-MLP-predicted capacities and the measured bearing capacities. Based on the R2 and determination coefficient as 0.90364 and 0.8643 for testing and training datasets, respectively, it is suggested that the DA-MLP model can be effectively implemented with higher reliability, efficiency, and practicability to predict the bearing capacity of piles.

• 한국인터넷방송통신학회논문지
• /
• 제19권1호
• /
• pp.85-95
• /
• 2019

이 연구는 다양한 직경의 덕트를 탐사하고 극복하는 삼족 로봇의 구조를 디자인 하는 데에 목적이 있다. 세 개의 휠바디들은 센터바디에 연결되어 회로들이 모여있고 그것들이 로봇바디들을 움직인다. 또한 4개의 파트로 이루어진 슬라이더 링크 구조들도 로봇의 움직임을 돕는다. 스프링들은 로봇 다리의 수축과 확장을 가능하게 하는데 로봇이 다양한 환경을 극복할 수 있도록 해준다. 기어모터와 스프링, 그리고 벨트들은 정, 동역학적 계산에 의해 수직축과 다양한 수평 구조를 극복할 수 있도록 선정되었습니다. 센터 바디에는 카메라와 거리 센서가 장착되어 있으며 이를 활용하여 L형 및 T형의 덕트에서도 성공적으로 진행이 되도록 제어 알고리즘을 구현하였다. UWB 모듈 및 3변 측위 알고리즘을 사용하여 덕트 내의 청소로봇의 위치 추정도 성공적으로 이루어졌다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권4호
• /
• pp.2042-2059
• /
• 2019

Digital shadow puppet has traditionally relied on expensive motion capture equipments and complex design. In this paper, a low-cost driven technique is presented, that captures human pose estimation data with simple camera from real scenarios, and use them to drive virtual Chinese shadow play in a 2.5D scene. We propose a special method for extracting human pose data for driving virtual Chinese shadow play, which is called 2.5D human pose estimation. Firstly, we use the 3D human pose estimation method to obtain the initial data. In the process of the following transformation, we treat the depth feature as an implicit feature, and map body joints to the range of constraints. We call the obtain pose data as 2.5D pose data. However, the 2.5D pose data can not better control the shadow puppet directly, due to the difference in motion pattern and composition structure between real pose and shadow puppet. To this end, the 2.5D pose data transformation is carried out in the implicit pose mapping space based on self-network and the final 2.5D pose expression data is produced for animating shadow puppets. Experimental results have demonstrated the effectiveness of our new method.

• 한국의류학회지
• /
• 제28권11호
• /
• pp.1395-1403
• /
• 2004

Exposure and Concealment have been continued as important way to express fashion and theme as well, especially in women fashion. Exposure can make themselves attractive, and concealment emphasizes this way of being attractive by exposure. Besides the temptable effect of exposure, the ideology which put women next men in society has made a prominence on the fact exposure is significant theme in women fashion. It means that women's image of 'Being seen as Object' (this can be explained by relation passive between active) in society has driven female emphasize in using and focusing on exposure to be attractive. Also the other important thing in women fashion has been considered is concealment. The fact that society has demand women more chaste duty in detail may have meaningful thing in the condition that instigates women take off being attractive to the subject, considering ideology, men. Therefore attractive femininity has to be suggested by virtue and temptation, it is common sense that looking just shallow or too strict are far from criteria of ideal beauty. Namely, the concept for exposure coexists with concealment not only constructively but also naturally in fashion. Technique that can be accentuate for effective exposure differently from method to show unilaterally is needed, and this technique can promote new fashion. And according to the theory of Freud, women means' Absence (lacking penis)', this female's Lack Image induces male castration complex therefore 'Fetishistic Look' which transfers something phallic into specific things or parts of body is adopted, sort of object cathexis. This is revealed as some parts of women body are diverted into object for sexual love, symbolic equivalent. For example, women's parts like legs or breast are remarked as erotogenic zone and as time goes, when no more the zone are felt sexual by exposure, other somewhere felt mysterious (felt something sexual) used to be stressed by exposing. As it were, it can be possible that exposing part on women body (sexual part) moved as time passed because of what previously stated. Especially, the concept of exposure and concealment in women fashion should explain not only from a point of view of style for the beautifulness but also from wearer's immanent intention, further more relationship with ideology. About the present situation becoming bolder in women fashion, it is said that women express confidence as the position of women is elevated higher socially, the more women get freedom. But if we consider this psychoanalysis opinion mentioned ahead, the possibility can not be excluded that the exposure can get emphasizing according as the need of feminine modesty gets decreasing from ideal femininity society, men want. This study about exposure and concealment was made progressed through the theory of Freud who originated psychoanalysis, presented many theories. But nowadays contradictions are being brought up against Freud's theory including conventional philosophy like male chauvinism and adjust studies get suggested. Hereupon, there may be limitation in making no allowance of contradiction and following his theory.