• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.637-643
• /
• 2000

The shrouded corotating disk flow has a simple figure on geometric basis, but has various and complicated forms of flow. this complicated flows can be variously applied to not only information storage device, but also turbomachinery which is greatly influenced by centrifugal force. This study measured its velocity to measure inner flow field with unique flow field univluenced, using LDV and subminiature hot-wire. The result of experiment shows that distribution limits of solid body rotation region, dimensionless velocity gradient and distribution limits of disk surface boundary layer(Ekman layer) are changed by the gap of disks and rotating speed. Circulating vortex which is near the shroud is effected by the gap of disks and rotating speed.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.6
• /
• pp.16-23
• /
• 2001

Spray dispersion in high pressure diesel engines have been simulated experimentally with a special emphasis on the effect of swirl by using a liquid injection technique. A constant volume chamber was designed to be rotatable in order to generate a continuous swirl and to have the flow field closely resembling a solid body rotation. Emulsified fuel was injected into the chamber and the developing process of fuel sprays was visualized. The effect of swirl on the spray dispersion was quantified by calculating non-dimensionalized dispersion area according to the spray tip penetration length. The results show that the effect of swirl on the spray dispersion is different between short and long spray penetrations. For short range of spray tip penetration, the effect of swirl on spray dispersion is quite small. However, as the spray tip is penetrated into longer distance in spray chamber, the effect of swirl on spray dispersion becomes larger. These results can be used as a basic data for designing combustion chamber and injection system of direct injection diesel engine.

• Journal of Power System Engineering
• /
• v.17 no.4
• /
• pp.139-146
• /
• 2013

Because the magnetic bearing supports levitating body without contact, wear, noise and vibration, it is very useful to high revolution machinery. In this paper we selected ATmega 128, a less expensive and widely used micro controller, for control the magnetic bearing system. And we selected the sampling time and the control gain of PID controller through trial-and-error. The control program of the one board controller utilized lookup table to reduce calculation time, and bit shifting for the integer calculation in instead of floating point calculation. As the results, the controller carried out relatively high speed PID control on sampling time 0.25 ms. At last the rotation test for the magnetic bearing system was carried out by 3 phase induction motor and air turbine.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.12 no.12
• /
• pp.1001-1009
• /
• 2002

In this paper, we analyse and present mechanical dynamic characteristics of a micro-machined vibrating silicon ring gyroscope which can measure angular velocities about three orthogonal axes. The ring gyroscope has a ring connected to the gyroscope main body by support-ligaments which are arranged with cyclic symmetry. The natural modes of its vibration can be distinguished into the in-plane motion and the out-of-plane motion which are coupled by the gyro-effect due to the rotation of the gyroscope main body. The equations of motion, the response to angular velocities, and the relationships between the natural modes of vibration are derived and compared with the previous studies for the design of a micro three-axis ring gyroscope.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.5
• /
• pp.2327-2347
• /
• 2018

Human actions can be recognized from depth sequences. In the proposed algorithm, we initially construct depth, motion maps (DMM) by projecting each depth frame onto three orthogonal Cartesian planes and add the motion energy for each view. The body part of the action (BPoA) is calculated by using bounding box with an optimal window size based on maximum spatial and temporal changes for each DMM. Furthermore, feature vector is constructed by using BPoA for each human action view. In this paper, we employed an ensemble based learning approach called Rotation Forest to recognize different actions Experimental results show that proposed method has significantly outperforms the state-of-the-art methods on Microsoft Research (MSR) Action 3D and MSR DailyActivity3D dataset.

• Proceedings of the KSR Conference
• /
• 2009.05b
• /
• pp.559-564
• /
• 2009

Aluminum extrude is increasing to vehicle body manufacture of a recent railroad vehicle. Conventional welding of this aluminum extrude has been used MIG welding or resistance spot welding mainly. But the advanced manufactures like Japan's tried to apply the friction stir welding and friction spot joining at railroad vehicle body manufacture process. Therefore in this paper we tried to study to apply friction stir welding to AL 6005-T6 extrude which has been manufactured the railroad vehicle mainly. In this study we investigated first the mechanisms to affect the welding strength in friction stir welding. After we made the 3 tools of different shape, we observed how the welding strength changed while changing the welding time and the rotation speed, the plunging depth.

• Anxiety and mood
• /
• v.5 no.2
• /
• pp.112-119
• /
• 2009

Objective : Recently, there is an increasing trend of attachment to physical appearance of individuals in many persons with spread of social concern through mass communication. Domestically, several studies has been performed, but they were limited to obesity mainly for juveniles or female college students. Therefore, purpose of this study were to standardize Body image dysmorphic disorder examination self report with male and female college students in Cheonnan area. Methods : This study were total 825 college students in Cheonan area. Subject group are consist of 393 males (47.6%) and 427 females (51.8%), and the mean age was $22.28{\pm}3.24$ years old. Results : The BDDE-SR had adequate internal consistency (Cronbach's alpha=.93) and test-retest (r=.82) and interator reliability. Four factors were extracted by factor analysis with the Varimax rotation. They were 'the camouflage and comparison factor', 'the self-consciousness and negative self-evaluation factor', 'the avoidance factor', and 'the distressing and embarassment factor'. The total score of BDDE-SR was $50.8{\pm}27.1$, female's score ($59.2{\pm}25.5$) was statistically higher than male's score ($41.85{\pm}25.84$). Conclusion : It is considered that BDDE-SR is reliable instrument for body image dissatisfaction, provided correct information in predicting clinical status of Body dysmorphic disorder that is most largely influenced by individual psychologic factor and family system.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.45 no.5
• /
• pp.63-71
• /
• 2008

In this paper, we propose a color based hierarchically propagated particle filter that extends the color based particle filter into the articulated upper body tracking. Since color feature is robust to partial occlusion and rotation, the color based particle filter is widely used for object tracking. However, in articulated body tacking, it is not desirable to use the traditional particle filter because the dimension of the state vector usually is high and thus, many samples are required for robust hacking. To overcome this problem, we use a hierarchical tracking method for each body part based on the blown body part. By using a hierarchical tracking method, we can reduce the number of samples for robust tracking in the cluttered environment. Also for human pose recognition, we classify the human pose into eight categories using Support Vector Machine(SVM) according to the angle between upper- arm and fore-arm. Experimental results show that our proposed method is more efficient than the traditional particle filter.

• Journal of Korean Physical Therapy Science
• /
• v.10 no.2
• /
• pp.112-122
• /
• 2003

The purpose of this study is to search effect that GCM joint treatment gets to right and left range of motion of neck, lumbar, trunk and anke joint. Estimated body deformity using GCM body type assesment chart then measured range of motion of each region. After control group did as act freely after do experiment premeasurement control group did postmeasurement. Each region was measured by measurer who each subject person differs. Experimental group did GCM joint treatment and all measurements each region by measurer who each subject person differs three times measured. When measure with each measurement, measured after leave and walk time interval for 10 minutes. For the analysis of the resulr of experiment the results is change amount comparison increased to keep in mind except ankle joint's dorsiflexion before experiment of experimental group and control group(P<.05). Before an experiment and after an experiment of experimental group, differed to keep in mind in right and left comparison of neck rotation, dorsiflexion, plantaflexin of ankle joint in change amount comparison(P<.05). Neck lateral flexion appears and displayed significantly level right and left difference than rotation after experiment of experimental group(P<.05). Because dorsiflexion, plantefleaion of ankle joint became similar right and left significantly difference did not appear(P<.05).

• Korean Journal of Applied Biomechanics
• /
• v.16 no.4
• /
• pp.49-59
• /
• 2006

The purpose of this study was to investigate the relations between the segments of the body, the three dimensional anatomical angle according to sweep shot in ice hockey. The subjects of this study were five professional ice hockey players. The reflective makers were attached on anatomical boundary line of body. For the movement analysis three dimensional cinematographical method(APAS) was used and for the calculation of the kinematic variables a self developed program was used with the LabVIEW 6.1 graphical programming(Johnson, 1999) program. By using Eular's equations the three dimensional anatomical Cardan angles of the joint and ice hockey stick were defined. 1. In three dimensional linear velocity of blade the Y axis showed maximum linear velocity almost impact, the X axis(horizontal direction) and the Z axis(vertical direction) maximum linear velocity of blade did not show at impact but after impact this will resulted influence upon hitting puck. 2. The resultant linear velocity of each segment of right arm showed maximum resultant linear velocity at impact. It could be suggest that the right arm swing patterns is kind of push-like movement. therefore the upper arm is the most important role in the right arm swing. 3. The three dimensional anatomical angular displacement of trunk in flexion-extension showed flexion all around the wrist shot. The angular displacement of trunk in internal-external rotation showed internal rotation angle at the backswing top and and increased the angle after the impact. while there is no significant adduction-abduction. 4. The three dimensional anatomical angular displacement of trunk showed most important role in wrist shot. and is follwed by shoulder joints, in addition the movement of elbow/wrist joints showed least to the shot. this study result showed upperlimb of left is more important role than upperlimb of right.