• Journal of computational fluids engineering
• /
• v.2 no.2
• /
• pp.35-43
• /
• 1997

An efficient inverse method for 1.he supersonic/hypersonic axisymmetric body design is developed for the parabolized Navier-Stokes equations. The developed method is examined numerically for three extreme testcases in the supersonic(M/sub ∞/=3.0) and hypersonic(M/sub ∞/=6.28) speeds. The first one is a negative pressure distribution near a vacuum pressure and the second one is a positive pressure distribution over the whole region of the body. The last one is the case of abrupt change of pressure distribution to zero in the forward region of the body. These testcases show the robustness of the method. By introducing a regular-falsi method and by using a not-fully converged inverse solution, the convergence behavior was greatly improved.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.43-51
• /
• 2020

This study examined how the eight-week spinal stabilization exercise program affects the cervical disability index, postural balance ability, and body shape change. The exercise program performed 60 minutes of spinal stabilization exercise three times a week for eight weeks. Sixteen patients with chronic neck pain, who complained of neck pain for six months, were classified into exercise group (n=8 patients) and control group (n=8 patients). The results before and after the eight-week exercise program were observed. Significant differences were observed in the time, group, and interaction of the neck disability index (p<.05). The balance ability showed significant interaction effects between the groups and periods (p<.05). Significant differences were noted in the timing and interaction in the pelvic inclination angle in posture change (p<.05), and there were significant differences in the group, timing, group, and interaction in the cervical and shoulder position angles (p<.05). The above results showed that the spinal stabilization exercise significantly improved the cervical disability index, balance ability change, and body shape change in patients with chronic neck pain. Future studies will analyze the specific changes in spinal structure through radiographic imaging to increase the validity of spinal stabilization exercise.

• Journal of Nutrition and Health
• /
• v.29 no.7
• /
• pp.778-787
• /
• 1996

The purpose of present study was to assess the change of bone mineral density(BMD) and the influences of anthroopometric indices and body composition on BMD in Korean women in Taegu. Subjects were 242 healthy female in the range of 7-67 years old, were divided into 4 age groups in order to assess the influence o factors on BMD according to age. Body composition and BMD measurements of lumbar spine, femur(neck, ward's triangle, trochanter) and total body were performed by dual energy X-ray absorptiometry. The analysis indicated that BMD of most region was positively related to body weight, BMI in all groups 4(50-67years), and closely related to femurs than lumbar spine. This study found correlations between BMD and both total fat body mass and total lean body mass in group 1, 2, 3, and correlations between BMD and only total fat body mass and in group 4. But on regression models the most significant prediction of BMD throughout the skeleton was total lean body mass in group 1(7-16years)and 2(17-34years, and total fat body mass in group 3 and 4. It is concluded that the our data can be used to screen early women of low bone mass. This study confirms that one of the most effective way to prevent osteoporosis and the fractures is to maximize peak bone mass in early life and to minimize bone loss through maintaining adequate weight.

• Fashion & Textile Research Journal
• /
• v.16 no.2
• /
• pp.266-274
• /
• 2014

Parametric bodies reproduce the actual shape of human body parts and should be convenient for general users to change size to judge the visual fit of clothes on-line. In this study, three parametric bodies(i.e. I, C, D ) were compared to verify the accuracy of the provided body dimensions and reproducibility to a target model. To compare reproducibility, the 20s female standard virtual model developed for an apparel industry by Korean agency for technology and standards is used. The investigation of existing parameters showed that the numbers and kinds of parameters provided by each program were different with some errors in notation; in addition, some of virtual body dimensions went beyond the maximum allowable error. The result of changing each parametric body to the 20s female standard body showed that D, C, I in order produced better reproducibility for body dimensions. There were different levels of protrusion and concavity in the virtual cross sections and virtual longitudinal sections despite the small differences in body dimensions and cross sectional areas; in addition, some parametric body was not bilateral symmetry. The results of this study can be used as basic information in the standardization of a virtual model used in a virtual garment program.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.47 no.3
• /
• pp.409-424
• /
• 2023

This study aimed to reveal prospective fashion designers' predominant perceptions regarding the ideal body size and shape and to suggest an educational guideline for the design process. Sketch tasks and surveys involving the college students in a fashion design department were conducted over the course of a year. A total of 113 participants designed a white cotton shirt for women in their 30s and 40s. Immediately after the sketching task, the participants answered survey questions on the specific body sizes and shapes they had been picturing. According to the results, the participants designed shirts for a medium-sized, hourglass body shape. As the percentage of women in their 30s and 40s with an hourglass shape is low, a discrepancy exists between the ideal design and the body of the actual consumer. Furthermore, 55% of the participants indicated that they would change the design for a woman with a different body shape. The majority of the participants agreed that understanding the body shape and size is important when initiating ideas. These findings can help educators understand the importance of improving designers' awareness of various body sizes and shapes; they also suggest new directions for fashion design education.

• Nutrition Research and Practice
• /
• v.15 no.sup1
• /
• pp.53-69
• /
• 2021

BACKGROUND/OBJECTIVES: To determine the weight change trend among the adult Turkish population after 1 yr of the coronavirus disease 2019 (COVID-19) pandemic and factors associated with weight change. MATERIALS/METHODS: This cross-sectional study was conducted between 26 February and 6 March 2021 using an online questionnaire that included questions for sociodemographic variables, eating habits, stress level, and the Three-Factor Eating Questionnaire-R18. Those who weighed themselves 1-2 weeks before the pandemic was declared in Turkey and remembered their weight were invited to participate in the study. Trends in weight and body mass index (BMI) change were calculated. The variables associated with a 1% change in BMI were assessed using hierarchical regression analysis. RESULTS: The study was conducted with 1,630 adults (70.25% female) with a mean age of 32.09 (11.62) yrs. The trend of weight change was found to increase by an average of 1.15 ± 6.10 kg (female +0.72 ± 5.51, male +2.16 ± 7.22 kg) for the first year of the COVID-19 pandemic. The rate of participants with a normal BMI (18.50-24.99 kg/m²) decreased to 51.91% from 55.75%. Consuming an "Increased amount of food compared to before the pandemic" was found to be the independent variable that had the strongest association with a 1% increase in BMI (β = 0.23 P < 0.001). The average change in the BMI was higher in older individuals than in those who were younger. A high stress level was associated with a decrease in BMI (β = -0.04 P = 0.048). CONCLUSIONS: In this study, the factors associated with weight change after 1 yr of the pandemic in the Turkish population was reported for the first time. A high stress level and increased weight gain trend still occur in Turkey after 1 yr of the pandemic.

• Journal of the Korean Society of Costume
• /
• v.66 no.3
• /
• pp.147-161
• /
• 2016

This study analyzed the effects of job style on job satisfaction and turnover intention of fashion models, and the difference in the job style, job satisfaction and turnover intention by model activities period. Data was collected by surveying fashion models with more than 10 modeling experiences, and 230 responses were used in the data analysis. The results of were as follows: First, the job style of fashion models were classified into professional ability type, social relationship-focused type, future-oriented type and body-boasting type. Job satisfaction was classified into satisfaction with working conditions, satisfaction with model activities, and satisfaction with relationships. Turnover intention was classified into intention to change jobs, and intention to quit modeling. Second, being a professional ability type had a negative effect on satisfaction with working conditions, whereas being a future-oriented type had a positive effect on it. The professional ability type and social relationship-focused type had a positive effect on satisfaction with model activities, and the social relationship-focused type had a positive effect on satisfaction with relationships. Third, the future-oriented type and body-boasting type had a negative effect on the intention to change jobs. The social relationship-focused type, future-oriented type and body-boasting type had a negative effect on the intention to quit modeling. Fourth, there were significant differences in the professional ability type, human relationship-focused type, body-boasting type, intention to change jobs and intention to quit modeling by model activities period. Therefore, it is necessary for domestic fashion models to have the appropriate attitude to develop features and competency required for modeling projects and if improvements are made to enhance job satisfaction of fashion models, the fashion modeling industry is expected to make further developments.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.5 s.164
• /
• pp.729-741
• /
• 2007

In order to examine the characteristics of brassiere products for the 1924 generation brands on the market and grasp problems, we selected three 'comparative brassieres', each one from among the 1924 underwear brands with the highest recognition and sales profit, and then designed a 'sample brassiere' pattern(75A) with a similar shape to the comparative brassieres. We set up the "New Cup Grading Rule" with a view of reflecting the wearing effect that was varied according to cup sizes, graded the sizes of 75AA and 75B with this method, and made the sample brassieres in three sizes. We conducted the wearing evaluation and body measurements of 9 subjects after analyzing the patterns and characteristics of the sample brassieres and three comparative brassieres. As a result of the wearing evaluation, the sample and comparative brassiere 2, the dimensions and shapes were appropriate for the 1924 generation consumers and expressed an overall natural silhouette, showed satisfactory results in the entire evaluation questions. On the other hand, the comparative brassiere 1 and 3 that tended toward making a big change in the physical characteristics got unsatisfactory evaluations in the dimensions of the cups, clothing pressure, and bust silhouette. As a result of observing the variation in body dimensions by body measurements when nude and when wearing each brassiere and then summing it up with the score of the wearing evaluation, it was proven that too much change in body shape can create a negative image by upsetting the balance of the whole silhouette. Therefore, it is desirable to develop brassiere products with proper dimensions and clothing pressure that can make a physical change that harmonizes the overall bust silhouette and the position and shape of the breasts.

• Fashion & Textile Research Journal
• /
• v.14 no.2
• /
• pp.277-285
• /
• 2012

This research studied how to develop tight upper sportswear from 3D scan data considering fabric stretch property. Subjects were five Korean men of average figure in their 20's. Scanning was done for ten postures via vitus smart/pro(Techmath LTD). Analyzing from 3D scan data, more than 70% of the upper body surface showed surface change rate under 20%. It was shoulder and under arm side part that showed most noticeable body surface change when moving. A parametric model with convex surface was generated and flattened onto the plane, resulting 2D pattern. The error rate occurring in the process of 3D to 2D conversion was 0.2% for outline and 0.13% for area, respectively. Thirteen kinds of stretchable fabrics in the market were collected for this study. Stretch property was in the range of 16.0~58.2% for wale direction; 23.1~78.4% for course. Based on wear trial test, four fabrics were chosen for making the 1st experimental garment and finally one fabric was chosen for the 2nd one, which was developed applying 4 kinds of crosswise reduction rate on 2D pattern: 0, 5, 10, and 15%. Through wear trial test and garment pressure measurement, experimental garment applied with 10% pattern reduction rate was evaluated as most comfortable and considerable.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.10
• /
• pp.1213-1222
• /
• 1999

A finite element method is developed for calculating the temperature and enthalpy distribution and accordingly the solid, liquid and mushy zone in a three-dimensional body subjected to any heat boundary conditions. The method concurrently consider both temperature and enthalpy for consideration of the latent heat effect, differently from other methods of using a special energy balance equation for solving a mushy zone. The developed brick element has eight nodes with one degree of freedom at each node. The numerical method and procedure are verified using the results of one and two dimensional analytic solutions and by other researchers. It is shown that the present method presents a consistent and stable results in either abrupt or ranged phase change problems. Moreover, the numerical results by the present method are hardly effected by the calculation time steps which otherwise are difficult to determine in most phase change problems. Finally, as a three-dimensional application, a T-shaped body of a phase change is presented and the temperature and enthalpy variation along the time are solved.