• Journal of IKEEE
• /
• v.17 no.4
• /
• pp.484-491
• /
• 2013

In this paper, we proposed an internal multiband loop embedded monopole antenna for mobile handset that could be used for smart phones. The proposed antenna has a volume of 40 mm(W) ${\times}$ 15 mm(L) ${\times}$ 5 mm(H), ground plane size is 40 mm(W) ${\times}$ 80 mm(L), and covers the GSM900 (Global System for Mobile communications : 880-960 MHz), K-PCS (Korea-Personal Communications Service : 1750-1870 MHz), US-PCS (US Personal Communications Service : 1850-1990 MHz), WCDMA (Wideband Code Division Multiple Access : 1920-2170 MHz), Wibro (2300-2390 MHz), Bluetooth (2400-2483 MHz) and WLAN (Wireless Local Area Network : 2400-2483.5 MHz) bands for VSWR (voltage standing wave ration) less than 3. The proposed loop adding design at middle section of longest branch showed wide impedance bandwidth for the lowest resonance frequency band. The proposed antenna have a lowest resonance frequency band from 738 MHz to 1075 MHz for S11 value of -6dB. A HFSS (High Frequency Structure Simulator) of the Ansys Corporation based on a finite element method is employed to analyze the proposed antenna in the design process and to compare the simulation and experimental results.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.3
• /
• pp.285-292
• /
• 2015

This paper presents a wireless ground reaction force (GRF) sensing system for ambulatory GRF recording. The system is largely divided into three parts: force sensing modules based on optical sensor, outsole type frame, and embedded system for wireless communication. The force sensing module has advantages of the low height, robustness to the moment interference, and stable response in long term use. In simulation study, the strain and stress properties were examined to satisfy the requirements of the GRF sensing system. Four sensing modules were mounted on the toe, ball, and heel of foot shaped frame, respectively. The GRF signals were extracted using Micrpcontroller unit and transferred to the smart phone via Bluetooth communication. We measured the GRF during the normal walking for the validation of the continuous recording capability. The recorded GRF was comparable to the off the shelf stationary force plate.

• Journal of Korea Multimedia Society
• /
• v.17 no.12
• /
• pp.1461-1472
• /
• 2014

Recently, smart devices has been spreaded and the definition of RFID/USN(Radio Frequency Identification/Ubiquitous Sensor Network) technology has also extended. So, originally, human is an agent of communications but now, 'the things' are also an agent of communication. That is, Internet of Things(IoT). IoT is very big IT infra technology that is based on wire-wireless network technologies such as Bluetooth and Wi-Fi. However, in reality, IoT service that can provide various meaning and integrate smoothly is not appear yet. To solve these problems of IoT, we implemented Publish/Subscribe system, which operate in Zigbee based wireless sensor network by using MQTT-SN protocol. Moreover, this system can operate with combining MQTT system that is already existed in external Internet network so, extensibility and flexibility aspect is excellent. We show that possibility of IoT services that is combined between different heterogeneous network through the MQTT-SN.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.9
• /
• pp.2064-2071
• /
• 2012

The generalization trend of smart phones have brought many smartphone games into daily lives. These games are mainly dependent on the interactions on the display of the phone using finger touches. On the other hand, functions for detecting the positions and actions of the phones such as gyro-sensors have been rapidly developed over the former orientation sensors and acceleration sensors. Though it has become technologically possible to detect the users' motion via the smartphone devices and to use the phone device directly as the game device, it is hard to find the actualized cases. This paper proposes a new paradigm including basic frameworks and algorithm for the games combining the motion recognitions and mutual communications on the smartphones and finally presents the details of its implementation and results.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.865-866
• /
• 2013

의학기술의 발전과 소득수준의 증가에 따라 사라들은 단순히 전염병을 예방하거나 질병을 치료하는 수준이 아닌 '건강하게 오래 사는 것'을 원하면서 치료에서 예방으로, 의료 공급자 중심에서 의료 소비자 중심으로 의료산업의 패러다임이 변화하고 있다. 이에 건강을 미리 지키는 예방적 개념의 웰니스 산업의 빠르게 성장하고 있다. 이에 본 논문에서는 Continua Health Alliance(CHA) 에서 개인건강기기에 반드시 포함해야 하는 표준인 ISO/IEEE 11073을 활용하고 Bluetooth HDP를 통해 의료기기와 스마트TV간 연결을 확보하고 지속적으로 개인의 건강을 체크할 수 있는 건강관리 모니터링 앱을 통한 일상생활 속에서의 건강관리를 위한 스마트TV를 기반의 웰니스 솔루션을 설계하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.643-644
• /
• 2018

Recently indoor and outdoor location tracking systems are operated in different ways. The indoor positioning method uses WiFi and BLE beacon positioning, and the outdoor positioning uses GPS and PDR. In this paper, it is a device to measure position by using it. It is used to check whether it is indoors or outdoors when measuring based on a smart phone, A automatic conversion method is needed. When using GPS in the room, it is difficult to distinguish the floor or space. We propose a method to solve this problem.

• Fire Science and Engineering
• /
• v.32 no.3
• /
• pp.134-139
• /
• 2018

Extremely fine particles seriously affect people and are becoming a social problem. Conventional methods using the type of beta ray absorption are difficult to have real-time measurements and miniaturization for the acquisition of fine dust. In this paper, a light scattering method was used. The sensors were configured internally with semiconductor laser diodes for miniaturization, low cost and lightweight. The use of the FFT method makes it easier to separate fine dust according to size compared to conventional light scattering sensors. Bluetooth communication also allows the connection, monitoring and control of devices using smart phones.

• Journal of Korea Multimedia Society
• /
• v.17 no.5
• /
• pp.640-653
• /
• 2014

Recently medical consumers pursue high leveled quality of life through active promotion, prevention, management activity of health as the importance of health during home life is emerged to meet the aging society and chronic diseases. In addition, people are directed to the m-Health for managing yourself their health by using smartphone and various personal health devices, if necessary transmits health data to the physician himself. In the previous studies, m-Health Application were developed and applied in the real clinical environment by adopting the medical information standards was rarely conducted. Therefore, in this study, the m-Health application platform was developed. Developed application was communicate with IEEE 11073 standard protocol using the Bluetooth Health Device Profile in personal health device via smart phone to process blood pressure information, and it converted to HL7 V2.6 ORU_R01 message for send to remote medical server. In addition, we tested the interoperability and safety of the developed application for 23 inpatient and 17 outpatient at D University Hospital. As a result, the blood pressure information has been transmitted without error.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2019.10a
• /
• pp.276-279
• /
• 2019

본 논문은 실내 온도, 습도, 조도, 그리고 토양의 습도까지 탐지하여 자동으로 습도와 빛을 조절해주는 스마트 화분을 다룬다. 화분은 일상생활에서 구할 수 있는 화분을 사용했고 다양한 꽃의 생육 정보를 모은 DB를 기반으로 아두이노를 통해서 다양한 센서 값들을 측정하고 모인 센서 값들은 라즈베리파이로 보내진다. 화분에 부착된 다수의 아두이노로부터 온 데이터를 라즈베리파이가 분석하고 판단해서 사용자에게 전달해주고 조치가 필요한 부분은 아두이노에 전송되어 알맞은 처리가 이뤄진다. 이때 다수의 아두이노와 라즈베리파이의 통신은 지그비 통신이며 라즈베리파이와 사용자 간의 통신은 블루투스와 클라우드 서버를 통해 이루어진다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.6
• /
• pp.1275-1280
• /
• 2018

We made a smartphone interlocking location tracking streetlight and remote display device to compensate the defect of real time identifiable CCTV streetlights and child safety notification applications. It controls brightness of LED by detecting the surrounding brightness and objects with ultrasonic sensor and illuminance senor. The CCTV receives the location of smartphone by Bluetooth and takes the target of the location. It realizes a wireless transmission system that the video is upload to the tablet PC via WiFi.