• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.46 no.4
• /
• pp.383-390
• /
• 2020

Blue light is a blue-based light existing at a wavelength between 380 and 450 nm, and it has been reported that it induces active oxygen and causes aging, and accordingly, interest in the blue light blocking effect is increasing. In this study, the effects of the polarity of oil, viscosity of the formulation, type of emulsifier, emulsified particles, and inorganic UV blocking agents on the blue light blocking effect in UV blocking products were investigated. As a result, it was confirmed that the blue light blocking rate increased as the polarity of the oil became similar to that of the organic UV blocker, and the higher the viscosity of the formulation, the higher the blue light blocking rate. The types of emulsifiers and emulsified particles had little effect on the blue light blocking effect, and the presence of inorganic UV blocking agents was found to be one of the factors that greatly influenced the blue light blocking rate. These results can effectively increase the efficiency of blocking blue light, and may be used in the development of blue light blocking products and formulation research in the future.

• The Journal of Korean Medicine
• /
• v.23 no.1
• /
• pp.92-99
• /
• 2002

Objectives : To investigate the role of Meridian flow on acupuncture effect, we observed the therapeutic effects of electroacupuncture (EA) after Meridian blocking with pressure in arthritic rats. Methods : To make reliable and local monoarthritis, $40{\;}{\mu}l$ complete Freund's adjuvant was injected into the tibio-tarsal joint. EA was applied on acupoint GB30 while 5 Pascal pressure was added to the middle of the Gall bladder Meridian around GB31 between acupoint GB30 and arthritic foci (ipsilateral meridian blocking: IB) or opposite part of IB (contralateral part blocking: CB). To observe the change of arthritis, extension and flexion pain scores and circumferential differences were evaluated once a week. Results : EA stimulation without blocking reduced arthritic pain significantly. IB abolished the acupuncture effects and there was no statistical difference with the arthritic control group, whereas the CB group still showed the therapeutic effects of acupuncture. Conclusions : This finding strongly supports that the Meridian blocking with local pressure reduced the therapeutic effect of EA.

• Communications for Statistical Applications and Methods
• /
• v.7 no.3
• /
• pp.741-757
• /
• 2000

In may experimental situations, whenever a block design is used, the block effect is usually considered to be fixed. There are, however, experimental situations in which it should be treated as random. The choice of a blocking arrangement for a response surface design can have a considerable effect on estimating the mean response and on the size of he prediction variance even if the experimental runs re the same. Therefore, care should be exercised in the selection of blocks. In this paper, in the presence of a random block effect, we propose a graphical method or evaluating the effect of blocking in response surface designs using cuboidal regions. This graphical method can be used to investigate how the blocking has influence on the prediction variance throughout all experimental regions of interest when this region is cuboidal, and compare the block effects in the cases of the orthogonal and non-orthogonal block designs, respectively.

• Communications for Statistical Applications and Methods
• /
• v.5 no.3
• /
• pp.607-621
• /
• 1998

When fitting a response surface model, the least squares estimates of the model's parameters and the prediction variance will generally depend on how the response surface design is blocked. That is, the choice of a blocking arrangement for a response surface design can have a considerable effect on estimating the mean response and on the size of the prediction variance even if the experimental runs are the same. Therefore, care should be exercised in the selection of blocks. In this paper, we prognose a graphical method for evaluating the effect of blocking in a response surface designs using cuboidal regions in the presence of a fixed block effect. This graphical method can be used to investigate how the blocking has influence on the prediction variance throughout the entire experimental region of interest when this region is cuboidal, and compare the block effect in the cases of the orthogonal and non-orthogonalblockdesigns, resfectively.

• Journal of Korea Multimedia Society
• /
• v.6 no.7
• /
• pp.1169-1177
• /
• 2003

The blocking effect results from independent coding of each image block and becomes highly visible, especially coded at very low bit rates. In this paper, a blocking effect reduction circuit is designed which is composed of a memory, arithmetic and logic unit, and control block. The circuit is based on a rational open uniform B-spline curve that uses to produce a smooth curve through a set of control points. The weight values and the modified pixel values in a rational open uniform B-spline curve are calculated using arithmetic and logic circuits. The simulation results show that the circuit has excellent performance for ail pattern of the blocking effects.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.10
• /
• pp.3629-3633
• /
• 2011

The effect of a dense $TiO_2$ blocking layer prepared using the sol-gel method on the performance of dye-sensitized solar cells was studied. The blocking layer formed directly on the working electrode, separated it from the electrolyte, and prevented the back transfer of electrons from the electrode to the electrolyte. The dyesensitized solar cells were prepared with a working electrode of fluorine-doped tin oxide glass coated with a blocking layer of dense $TiO_2$, a dye-attached mesoporous $TiO_2$ film, and a nano-gel electrolyte, and a counter electrode of Pt-deposited FTO glass. The gel processing conditions and heat treatment temperature for blocking layer formation affected the morphology and performance of the cells, and their optimal values were determined. The introduction of the blocking layer increased the conversion efficiency of the cell by 7.37% for the cell without a blocking layer to 8.55% for the cell with a dense $TiO_2$ blocking layer, under standard illumination conditions. The short-circuit current density ($J_{sc}$) and open-circuit voltage ($V_{oc}$) also were increased by the addition of a dense $TiO_2$ blocking layer.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.5
• /
• pp.83-93
• /
• 1996

This paper describes a new method for reducing blocking effet in block coded images using wavelet transform. In this method, all processings are one-dimensionally executed based on the fact that blocking effect occures both horizontal and vertical directions in image. Experimental results show that the proposed method yields PSNR improvement and better subjective quality.

• Proceedings of the IEEK Conference
• /
• 2003.07e
• /
• pp.1996-1999
• /
• 2003

Stereo matching is an important technique in the are of computer vision. There are already many theorems to find disparity map using stereo images. Usually, disparity is searched by using block matching. However block matching result in blocking effects caused by using fixed size window for computing pixel correlations. This paper suggests an efficient method to remove the blocking effect in stereo matching procedures.

• The Korean Journal of Community Living Science
• /
• v.17 no.4
• /
• pp.29-38
• /
• 2006

The present study proposed to develop a Hanji hat that can protect the body from UV rays and be preferred by consumers. For this purpose, using Hanji dyed by ginkgo leaf extract, we manufactured Hats in 12 designs. The UV blocking rate was determined by putting the hats on a mannequin and measuring the quantity of UV rays penetrating through the hat. In addition, preference for each design was surveyed, and the hat most suitable for the purpose was selected. The results of this study are as follows. 1. The UV blocking rate of the manufactured Hanji hats was over 92% for UVA and 97% for UVB in all of the 12 hats. 2. Among the 12 designs, the UV blocking rate for UVA was highest in 'Design(b)' and 'Design(1)' $(P\leq0.05)$, and the UV blocking rate for UVB was identical in all the designs except 'Design(i)' and 'Design(g)' $(P\leq0.01)$. 3. The effect of UV blocking was highest on the nape of the neck; next, on the brow, the cheeks, the nose and the chin in that order. 4. According to the result of the survey of preference, simple designs such as 'Design(a), (b)' and 'Design(9)' were preferred. In addition, it was found that the design would affect the purchase of a hat marked with a UV blocking index (68%). 5. Based on the results of this research as presented above, 'Design(b)', which showed a high UV blocking effect and was highly preferred, was selected as the most suitable hat for the purpose of this research.

• Restorative Dentistry and Endodontics
• /
• v.17 no.1
• /
• pp.10-21
• /
• 1992

The purpose of this study was to investigate the analgesic effect of eugenol, capsaicin and demethoxy-NE. Young adult cats, weighing 2.0 to 3.0kg, were used. Each animal was anesthetized (${\alpha}$-chloralose 60mg per kg body weight) and divided into four groups; control, eugenol, capsaicin and demethoxy-NE group. The anterior digastric muscles were exposed and a pair of electrodes was inserted to record the electromyograms. To expose the pulp, each canine teeth was prepared with a low speed bur under cooling and used for recording anterior digastric muscular EMGs evoked by noxious stimulation of dental pulp. To observe effects on jaw opening reflex, inferior alveolar nerve of both sides were exposed for drug application and wire electrodes were inserted in anterior digstric muscle for recording the EMGs. To observe effects on action potential, saphenous nerves of both sides were exposed and three tissue pools were made from surrounding tissue. The most distal pool was used for applying stimulation, the most proximal one for recording of action potential, and the other one for drug application. One side of inferior alveolar nerve and saphenous nerve were used for eugenol, capsaicin, or demethoxy-NE application, the other side of nerve for control experiments(only vehicle application). Anterior digastric muscular EMGs evoked by noxious stimulation of dental pulp were recorded before drug application, immediate after drug application, at 60 and 120 minutes, and 5 days after drug application. Action potentials were recorded before drug application, immediate after 30 minutes drug application, at 30, 60 and 120 minutes after drug had been washed out. The results were as follows; 1. Eugenol had a continuous blocking effect on the anterior digastric muscular EMGs evoked by noxious pulp stimulation and after 5 days, showed completely blocking effect. 2. After 5 days, demethoxy-NE applied to dental pulp had a considerable blocking effect on the jaw opening retlex evoked by noxious stimulation but capsaicin had no significant effect. 3. After 5 days, eugenol group showed the strongest blocking effect among the all experimental groups on the jaw opening reflex evoked by noxious stimulation of dental pulp and capsaicin group showed the weakest blocking effect. 4. Eugenol had a completely blocking effect on the action potential conductivity of peripheral nerve. Capsaicin and demethoxy-NE had the blocking effect on the action potential conductivity of ${\alpha}$-and C-nerve fibers. 5. Capsaicin, demethoxy-NE and eugenol applied to inferior alveolar nerve surppressed the jaw opening reflex evoked by noxious stimulation of dental pulp.