• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.5
• /
• pp.84-93
• /
• 2007

In this paper, a Radix-8 structure for high-speed FFT is propose. Main block of the proposed FFT structure is Radix-8 DIF(Decimation In Frequency) butterfly. Even throughput of the Radix-8 FFT is twice than that of the Radix-4 FFT, implementation area of the Radix-8 is larger than that of Radix-4 FFT. But, implementation area of the proposed Radix-8 FFT was reduced by using DA(Distributed Arithmetic) for multiplication. For comparison, the 64-point FFT was implemented using conventional Radix-4 butterfly and proposed Radix-8 butterfly, respectively. The Verilog-HDL coding results for the proposed FFT structure show 49.2% cell area increment comparison with those of the conventional Radix-4 FFT structure. Namely, to speed up twice, 49.2% of area cost is required. In case of same throughput, power consumption of the proposed structure is reduced by 25.4%. Due to its efficient processing scheme, the proposed FFT structure can be used in large size of FFT like OFDM Modem.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.5
• /
• pp.215-223
• /
• 2005

Piezo-ceramics are special materials which transform energy from mechanical to electrical forms and vice versa. Bender elements are composite materials consisting of thin piezo-ceramics and elastic shims, and are widely used as actuators and transducers in the field of electronics, robotics, autos and mechatronics utilizing the effectiveness of energy transformation capability. In geotechnical engineering, commercial bender elements are used in laboratory as source and receiver in the measurements of soil stiffness. The elements were built by using various metal shims sandwiched between piezo-ceramics and coating over the composite in the research. A pair of elements were buried in a concrete block and used as source and receiver to measure the stiffness of the concrete. The test results were verified by comparing with the resonant column testing results. In a preliminary stage of the development of an in-situ seismic testing equipment using bender elements for soft clay materials, shear waves were generated and measured by burying the elements in the barrel of kaolinite and water mixture. The measured shear wave signals were so distinct for the first-arrival pick that applicability of the elements in the field measurements could be very promising.

• The KIPS Transactions:PartB
• /
• v.10B no.5
• /
• pp.561-566
• /
• 2003

This paper proposes a new algorithm that generates smooth and realistic transition views from one viewpoint to another view point on the panorama based navigation system. The proposed algorithm is composed with two steps. One is prewarping that aligns the viewing direction in two panorama image, the other is bidirectional disparity morphing (BDM) that generates the intermediate scene from the aligned panorama images. For the prewarping, first of all, we compute the phase correlation between two images in order to get the information such as the displacement, rotation, and scale. Then we align the original images using these information. As soon as finishing the prewarping, we compute the block based disparity vectors (DVs) and smooth them using the two occluding patterns. As we apply these DVs to the BDM, we can get the elaborate intermediate scenes. We make an experiment on the proposed algorithm with real panoramic images and we can get the satisfactory results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.7A
• /
• pp.1028-1036
• /
• 2000

In this paper, an error-resilient image compression technique using wavelet transform is proposed. The zerotree technique that uses properties of statistics, energy and directions of wavelet coefficients in the space-frequency domain shows effective compression results. Since it is highly sensitive to the propagation of channel errors, evena single bit error degrades the whole image quality severely. In the proposed algorithm, the image is encoded by the SPIHT(Set Partitioning in Hierarchical Trees) algorithm using the zerotree coding technique. Encoded bitstreams are partitioned into some blocks using the subband correlations and then fixed-length blocks are made by using the effective bit reorganization algorithm. finally, an effective bit allocation technique is used to limit error propagation in each block. Therefore, in low BER the proposed algorithm shows similar compression performance to the zerotree compression technique and in high BER it shows better performance in terms of PSNR than the conventional methods.

• Spatial Information Research
• /
• v.19 no.2
• /
• pp.37-46
• /
• 2011

Recently in the field of GIS(Geographic Information System), data integration from various sources has become an important topic in order to use spatial data effectively. In general, the integration of spatial data is accomplished by navigating corresponding space object and combining the information interacting with each object. But it is very difficult to navigate an object which has correspondence with one in another dataset. Many matching methods have been studied for navigating spatial object. The purpose of this paper is development of method for searching correspondent spatial object considering local position error which is remained even after coordinate transform ation when two different building data sets integrated. To achieve this goal, we performed coordinate transformation and overlapped two data sets and generated blocks which have similar position error. We matched building objects within each block using similarity and ICP algorithm. Finally, we tested this method in the aspect of applicability.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.6
• /
• pp.55-62
• /
• 2005

This paper proposes a method to recognize a face using DCT/LDA where LDA is applied to DCT coefficients of an input face image. In the proposed method, SSS problem of LDA due to less number of training data than the size of feature space can be avoided by expressing an input image in low dimensional space using DCT coefficients. In terms of the recognition rate, both the proposed method and the PCA/LDA method have shown almost equal performance while the training time of the proposed method is much shorter than the other. This is because DCT has the fixed number of basis vectors while the property of energy compaction rate is similar to that of PCA. Although depending on the number of coefficients employed for the recognition, the experimental results show that the performance of the proposed method in terms of recognition rate is very comparable to PCA/LDA method and other DCT/LDA methods, and it can be trained 13,000 times faster than PCA/LDA method.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.5
• /
• pp.151-161
• /
• 2009

Audio Video Standard (AVS) is the audio and video compression standard that was developed for domestic video applications in China. AVS employs low complexity tools to minimize degradation of RD performance of the state-the-art video codec, H.264/AVC. The AVS video codec consists of $8{\times}8$ block prediction and the same size transform to improve compression efficiency for VGA and higher resolution sequences. Currently, the AVS has been adopted more and more for IPTV services and mobile applications in China. So, many consumer electronics companies and multimedia-related laboratories have been developing applications and chips for the AVS. In this paper, we implemented the AVS video decoder and optimize it on TI's Davinci EVM DSP board. For improving the decoding speed and clocks, we removed unnecessary memory operations and we also used high-speed VLD algorithm, linear assembly, intrinsic functions and so forth. Test results show that decoding speed of the optimized decoder is $5{\sim}7$ times faster than that of the reference software (RM 5.2J).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.2
• /
• pp.164-173
• /
• 2013

In this paper, we propose multi-frame based super resolution algorithm by using motion vector normalization and edge pattern analysis. Existing algorithms have constraints of sub-pixel motion and global translation between frames. Thus, applying of algorithms is limited. And single-frame based super resolution algorithm by using discrete wavelet transform which robust to these problems is proposed but it has another problem that quantity of information for interpolation is limited. To solve these problems, we propose motion vector normalization and edge pattern analysis for 2*2 block motion estimation. The experimental results show that the proposed algorithm has better performance than other conventional algorithms.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.6
• /
• pp.1419-1427
• /
• 2007

In this paper, we propose an algorithm which implements a multi-sided side match finite-state vector quantization(MSMVQ). After extracting the edge information from an image and classifying the image into edge blocks or non-edge blocks, we construct an edge map. We subdivide edge blocks into sixteen classes using discrete cosine transform(DCT) AC coefficients. Based on edge map information, a state codebook is made from the master codebook, and side match calculation is done for two-sided or three-sided current block of image. For reducing transmitted bits, a decision is made whether or not to encode the non-edge blocks among the pre-coded blocks by using the master codebook. Also for reducing allocation bits of codeword indices to decoder, a variable length coder is used. Considering the comparison with side match finite-state vector quantization(SMVQ) and two-sided SMVQ(TSMVQ) algorithm about Zelda, Lenna, Bridge and Peppers image, the new algorithm shows better picture quality than SMVQ and TSMVQ respectively.

• KIPS Transactions on Software and Data Engineering
• /
• v.5 no.2
• /
• pp.89-94
• /
• 2016

This paper proposed a facial expression recognition approach using SIFT feature and SVM classifier. The SIFT was generally employed as feature descriptor at key-points in object recognition fields. However, this paper applied the SIFT descriptor as feature vector for facial expression recognition. In this paper, the facial feature was extracted by applying SIFT descriptor at each sub-block image without key-point detection procedure, and the facial expression recognition was performed using SVM classifier. The performance evaluation was carried out through comparison with binary pattern feature-based approaches such as LBP and LDP, and the CK facial expression database and the JAFFE facial expression database were used in the experiments. From the experimental results, the proposed method using SIFT descriptor showed performance improvements of 6.06% and 3.87% compared to previous approaches for CK database and JAFFE database, respectively.