• 한국의류학회지
• /
• 제30권1호
• /
• pp.157-166
• /
• 2006

The human body, which is composed of concave and convex curvatures, makes it difficult to transfer into 2D patterns directly from 3D data. In previous studies. Jeong, et al.(2004) suggested the block method was fester and easier when dealing with the triangular patches of male's upper dress form. Although the block method is useful to make a pattern, the information(area, length, etc.) from a 2D pattern would be different depending on the direction of the block method. As a result horizontal and diagonal block methods were suggested as optimal methods for 2D tight-fitting patterns. These block methods were closer to the original area of the 3D scan data than the vertical block method. The total area of the 2D pattern obtained by the horizontal and diagonal block methods showed little differences. In case of the horizontal and diagonal block methods, the total error of the 2D pattern area ranged from $0.01\%\~0.25\%$. In comparing the length of the 2D pattern with that of the 3D scan data, the obtained 2D pattern was $0.1\~0.2cm$ shorter than the 3D scan data, which was within the acceptable range of errors in making clothes. 3D space distribution images between the body surface and the experimental clothing were also measured and $3\%$ enlargement of the original pattern was verified as the adequate adjustment.

• ETRI Journal
• /
• 제39권5호
• /
• pp.672-682
• /
• 2017

Video compression exploits statistical, spatial, and temporal redundancy, as well as transform and quantization. In particular, the transform in a frequency domain plays a major role in energy compaction of spatial domain data into frequency domain data. The high efficient video coding standard uses the type-II discrete cosine transform (DCT-II) and type-VII discrete sine transform (DST-VII) to improve the coding efficiency of residual data. However, the DST-VII is applied only to the Intra $4{\times}4$ residual block because it yields relatively small gains in the larger block than in the $4{\times}4$ block. In this study, after rearranging the data of the residual block, we apply the DST-VII to the inter-residual block to achieve coding gain. The rearrangement of the residual block data is similar to the arrangement of the basis vector with a the lowest frequency component of the DST-VII. Experimental results show that the proposed method reduces the luma-chroma (Cb+Cr) BD rates by approximately 0.23% to 0.22%, 0.44% to 0.58%, and 0.46% to 0.65% for the random access, low delay B, and low delay P configurations, respectively.

• 한국정보통신학회논문지
• /
• 제23권1호
• /
• pp.13-19
• /
• 2019

기계학습의 정확도는 학습용 데이터의 양과 데이터의 품질에 많은 영향을 받는다. 기존의 웹을 기반으로 학습용 데이터를 수집하는 것은 실제 학습과 무관한 데이터가 수집 될 수 있는 위험성이 있으며 데이터의 투명성을 보장할 수가 없다. 본 논문에서는 블록체인구조에서 블록들이 직접 병렬적으로 데이터를 수집하게 하고 각 블록들이 수집한 데이터를 타 블록의 데이터와 비교하여 양질의 데이터만을 선별하는 방안을 제안한다. 제안하는 시스템은 각 블록들은 데이터를 서로 블록체인을 통해 공유하며 All-reduce 구조의 Parallel-SGD를 활용하여 다른 블록들의 데이터와 비교를 통해 양질의 데이터만을 선별하여 학습용 데이터셋을 구성할 수가 있다. 또한 본 논문에서는 제안한 구조의 성능을 확인하기 위해 실험을 통해 기존의 벤치마크용 데이터셋의 이미지를 활용하여 변조된 이미지 사이에서 원본 이미지만을 양질의 데이터로 판별함을 확인하였다.

• 대한전자공학회논문지SD
• /
• 제49권3호
• /
• pp.30-36
• /
• 2012

BTC 압축은 간단하고 효율적인 압축 알고리즘으로 알려져 있다. 본 논문에서는, 컬러 이미지 압축을 위한 RMC-BTC 알고리즘(RMC : reduction method chrominace data)을 제안한다. RMC-BTC coding은 chrominace data를 축소시키기 위해서, 각 BTC 블록에서, chrominace data를 평균으로 표현하는 방법과, luminance 데이터 의 bit-map을 chrominace 데이터의 bit-map으로 활용하여 chrominace 데이터를 표현하는 방법을 사용하였다. 시뮬레에션 결과는 기존의 BTC 알고리즘의 PSNR과 압축비율의 비교를 통해서, 제안한 알고리즘의 효율성을 확인하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권11호
• /
• pp.3970-3990
• /
• 2021

In view of the problems of insufficient data collection and processing capability of multi-source heterogeneous equipment, and low visibility of equipment status at the ship block construction site. A data collection method for ship block construction equipment based on wireless sensor network (WSN) technology and a data processing method based on edge computing were proposed. Based on the Browser/Server (B/S) architecture and the OneNET platform, an online monitoring system for ship block construction equipment was designed and developed, which realized the visual online monitoring and management of the ship block construction equipment status. Not only that, the feasibility and reliability of the monitoring system were verified by using the intelligent tire frame system as the application object. The research of this project can lay the foundation for the ship block construction equipment management and the ship block intelligent construction, and ultimately improve the quality and efficiency of ship block construction.

• Journal of the Korean Data and Information Science Society
• /
• 제13권2호
• /
• pp.175-184
• /
• 2002

In this paper, diallel crosses block designs for control versus test comparisons among the lines are proposed. These block designs are constructed by using partially balanced incomplete block designs with C-properties. Also, the efficiencies of the diallel crosses block designs obtained through this method are tabulated for number of lines 22 or less.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1991년도 학술발표회 논문집
• /
• pp.78-81
• /
• 1991

Digital radio data is composed of groups which are divided into 4 blocks of 26 bits. And each block is made up of information word and check word. Check word of digital radio data that is composed ofcode word and offset word is used for group/block synchronization and error correction. In this paper, we have investigated the group/block synchronizer using offext word and shortened cyclic decoder for correcting error produced during the radio data transimission. Also, we have simulated the decoding process of the proposed decoder. From the simulation results, we have confirmed that the proposed decoder most with the required coding capcbility.

• 한국산업정보학회논문지
• /
• 제13권3호
• /
• pp.23-30
• /
• 2008

A data hiding method based on least significant bit (LSB) substitution and multi-pixel differencing (MPD) is presented on the proposed method to improve the capacity of the hidden secret data and to provide an imperceptible visual quality. First, a sum of different values for four-pixel sub-block is calculated. The low value of the sum can be located on a smooth block and the high value is located on an edged block. The secret data are hidden into the cover image by LSB method in the smooth block, while MPD method in the edged block. The experimental results show that the proposed method has a higher capacity and maintains a good visual quality.

• 한국군사과학기술학회지
• /
• 제20권2호
• /
• pp.187-196
• /
• 2017

The size of raw data has dramatically increased due to the recent trend of Synthetic Aperture Radar(SAR) development plans for high resolution and high definition image acquisition. The large raw data has an impact on satellite operability due to the limitations of storage and transmission capacity. To improve the SAR operability, the SAR raw data shall be compressed before transmission to the ground station. The Block Adaptive Quantization (BAQ) algorithm is one of the data compression algorithm and has been used for a long time in the spaceborne SAR system. In this paper, an optimization method of BAQ threshold table is introduced using real SAR raw data to prevent the degradation of signal quality caused by data compression. In this manner, a new variation estimation strategy and a new threshold method for block type decision are introduced.

• 한국멀티미디어학회논문지
• /
• 제6권3호
• /
• pp.397-408
• /
• 2003

기존의 Numbering 스킴을 이용한 XML 데이터의 인덱스 정의 방법은 개체가 삽입, 삭제, 갱신될 경우 인덱스가 재정의되어야 하는 문제점이 있다. 이러한 문제를 해결하기 위해서 본 논문은 블록단위의 인덱스기법을 제안한다. 블록과 블록사이는 많아야 하나의 관계가 유지 되도록 XML 데이터를 블록단위로 나누고, 각 블록에 대해 Numbering 스킴을 적용하여 인덱스를 정의한다. 이렇게 정의된 인덱스는 XML 데이터의 삽입, 삭제, 갱신의 경우 인덱스 재정의에 따른 오버헤드를 상당히 줄일 수 있다. 또한 XML 질의를 지원하기 위해 정의된 인덱스를 이용하여 두 개체사이의 관계를 검색하는 Parent-Child Block Merge Algorithm과 Ancestor-Descendent Block Merge Algorithm을 제안한다. 그리고 Ancestor-Descendent관계를 빠르게 검색하기 위하여 블록식별자가 부모의 정보를 유지하는 방법을 소개하고 이를 이용한 Parent-Child Block Merge Algorithm과 Ancestor-Descendent Block Merge Algorithm을 제안한다.