• 한국통신학회논문지
• /
• 제25권3A호
• /
• pp.391-398
• /
• 2000

In this paper, MRC(Maximum Ratio Combine) diversity, (23, 12) Golay code, (7, 5) Reed-Solomon code, and (3, 1) majority selection code are employed to improve the performance of DS/CDMA BRSK in Nakagami fading channel. and MRC diversity combined with other coding techniques is suggested, with which, the performance of DS/CDMA BRSK is compared and analyzed. Also, system required Eb/N0 to meet BER=10-5 for multi user data communication is obtained according to each techniques. From the results, when each techniques is employed to DS/CDMA BRSK system. coding employed system shows better performance than diversity employed system. Especially, Golay code shows better performance than oter codes. also MRC diversity is employed, the number of multiple access user to meet data communication requirement of BER=10-5 can accomodate up to 8 users. and when each code is employed, Golay code, majority selection code, and Reed-Solomon code shows the capacity of 14, 12, and 10 user respectively. But MRC diversity combined with coding techniques can reduce restriction of multiple access user. However, it is desirable these combined technique are employed according to service types and requirements provided.

• ETRI Journal
• /
• 제40권3호
• /
• pp.309-317
• /
• 2018

Single carrier-frequency-division multiple access (SC-FDMA) has been adopted as the uplink transmission standard in fourth-generation cellular networks to facilitate power efficiency transmission in mobile stations. Because multiuser multiple-input multiple-output (MU-MIMO) is a promising technology employed to fully exploit the channel capacity in mobile radio networks, this study investigates the uplink transmission of MU-MIMO SC-FDMA systems with orthogonal space-frequency block codes (SFBCs). It is preferable to minimize the length of the cyclic prefix (CP). In this study, the chained turbo equalization technique with chained turbo estimation is employed in the designed receiver. Chained turbo estimation employs a short training sequence to improve the spectrum efficiency without compromising the estimation accuracy. In this paper, we propose a novel and spectrally efficient iterative joint-channel estimation, multiuser detection, and turbo equalization for an MU-MIMO SC-FDMA system without CP-insertion and with short TR. Some simulation examples are presented for the uplink scenario to demonstrate the effectiveness of the proposed scheme.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권6호
• /
• pp.2881-2894
• /
• 2018

Cyber attacks are increasing continuously. On average about one million malicious codes appear every day, and attacks are expanding gradually to IT convergence services (e.g. vehicles and television) and social infrastructure (nuclear energy, power, water, etc.), as well as cyberspace. Analysis of large-scale cyber incidents has revealed that most attacks are started by PCs infected with malicious code. This paper proposes a method of detecting an attack IP automatically by analyzing the characteristics of the e-mail transfer path, which cannot be manipulated by the attacker. In particular, we developed a system based on the proposed model, and operated it for more than four months, and then detected 1,750,000 attack IPs by analyzing 22,570,000 spam e-mails in a commercial environment. A detected attack IP can be used to remove spam e-mails by linking it with the cyber removal system, or to block spam e-mails by linking it with the RBL(Real-time Blocking List) system. In addition, the developed system is expected to play a positive role in preventing cyber attacks, as it can detect a large number of attack IPs when linked with the portal site.

• 대한조선학회논문집
• /
• 제37권3호
• /
• pp.1-10
• /
• 2000

저항 및 자항등의 유체성능이 뛰어난 선형을 개발하기 위해서는 선체에 작용하는 여러 방향의 힘은 물론 그러한 결과를 발생시키는 선체 주위의 유동 현상에 대한 이해가 필수적이다. 이러한 국부 유동 현상의 규명을 위해 일반 상선 및 특수선 주위의 전체 파형과 속도 분포 등의 국부 유동현상을 관측할 수 있는 종합적인 국부유동 계측 시스템이 개발되었다. 이를 사용하여 KRISO 3600TEU 컨테이너선(KCS) 주위의 국부유동을 계측하였다. 본 자료는 날씬하고 빠른 현대적인 상선의 유동을 이해하는데 매우 귀중한 자료일 뿐만 아니라 계산유체역학 기법을 이용한 계산 결과의 검증을 위해서도 매우 중요한 자료로 평가된다.

• 전기학회논문지
• /
• 제66권8호
• /
• pp.1250-1256
• /
• 2017

In this research, a high-performance ultrasonic positioning system is proposed to track the positions of an indoor mobile object. Composed of an ultrasonic sender (mobile object) and a receiver (anchor), the system employs three ultrasonic time-off-flights (TOFs) and trilateration to estimate the positions of the object with an accuracy of sub-centimeter. On the other hand, because ultrasonic waves are interfered by temperature, wind and various obstacles obstructing the propagation while propagating in air, ultrasonic pulse debounce technique and Kalman filter were applied to TOF and position calculation, respectively, to compensate for the interference and to obtain more accurate moving object position. To perform tasks in real time, ultrasonic signals are processed full-digitally with a Zynq SoC, and as a software design tool, Vivado IDE(integrated design environment) is used to design the whole signal processing system in hierarchical block diagrams. And, a hardware/software co-design is implemented, where the digital circuit portion is designed in the Zynq's fpga and the software portion is c-coded in the Zynq's processors by using the baremetal multiprocessing scheme in which the c-codes are distributed to dual-core processors, cpu0 and cpu1. To verify the usefulness of the proposed system, experiments were performed and the results were analyzed, and it was confirmed that the moving object could be tracked with accuracy of sub-cm.

• 한국통신학회논문지
• /
• 제39C권12호
• /
• pp.1323-1326
• /
• 2014

본 논문은 해상환경에서 느린 주파수도약 대역확산 통신을 이용하여 멀티미디어/멀티캐스트 데이터를 전송할 때 사용하는 쇄상부호의 두 가지 내부호 구조에 따른 성능을 비교, 분석하였다. 첫 번째 내부호 구조로는 한 외부호 심볼당 하나의 내부호를 사용하는 것이고, 두 번째 내부호 구조로는 두 외부호당 하나의 내부호를 사용하는 것을 고려하였다. 점근적인 수학적 해석을 통하여 후자의 경우가 전자보다 더 성능이 우수함을 확인하였다.

• 대한전자공학회논문지TC
• /
• 제37권2호
• /
• pp.1-6
• /
• 2000

본 논문에서는 3GPP와 3GPP2에서 제시된 표준안을 사용하여 모의실험을 수행하였다. 모의실험은 AWGN 채널상에서 표준안으로 제시된 터보부호의 사양에 따른 성능분석을 중심으로 3GPP에 제안되어 있는 터보부호의 성능을 비교하였다. AWGN 채널과의 비교대상으로 실제 채널과 보다 근접한 레일리 페이딩 채널 하에서 3GPP2에 제시된 여러 블록 중 한 블록 크기에 대하여 수행된 결과를 제시하였으며, Max_Log MAP방식과 Log MAP 방식의 터보복호기의 성능도 비교하였다.

• 대한임베디드공학회논문지
• /
• 제14권6호
• /
• pp.313-319
• /
• 2019

Finite field operations have played an important role in error correcting codes and cryptosystems. Recently, the necessity of efficient computation processing is increasing for security in cyber physics systems. Therefore, efficient implementation of finite field arithmetics is more urgently needed. These operations include addition, multiplication, division and inversion. Addition is very simple and can be implemented with XOR operation. The others are somewhat more complicated than addition. Among these operations, multiplication is the most important, since time-consuming operations, such as exponentiation, division, and computing multiplicative inverse, can be performed through iterative multiplications. In this paper, we propose a multiplexer based parallel computation algorithm that performs Montgomery multiplication over finite field using redundant basis. Then we propose an efficient multiplexer based semi-systolic multiplier over finite field using redundant basis. The proposed multiplier has less area-time (AT) complexity than related multipliers. In detail, the AT complexity of the proposed multiplier is improved by approximately 19% and 65% compared to the multipliers of Kim-Han and Choi-Lee, respectively. Therefore, our multiplier is suitable for VLSI implementation and can be easily applied as the basic building block for various applications.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
• /
• pp.33-36
• /
• 2006

As the computing environment is rapidly improved, the interests of CFD are gradually focused on large-scale computation over complex geometry. Keeping pace with the trend, essential computational tools to obtain solutions of complex aerospace flow analysis and design problems are examined. An accurate and efficient flow analysis and design codes for large-scale aerospace problem are presented in this work. With regard to original numerical schemes for flow analysis, high-fidelity flux schemes such as RoeM, AUSMPW+ and higher order interpolation schemes such as MLP (Multi-dimensional Limiting Process) are presented. Concerning the grid representation method, a general-purpose basis code which can handle multi-block system and overset grid system simultaneously is constructed. In respect to design optimization, the importance of turbulent sensitivity is investigated. And design tools to predict highly turbulent flows and its sensitivity accurately by fully differentiating turbulent transport equations are presented. Especially, a new sensitivity analysis treatment and geometric representation method to resolve the basic flow characteristics are presented. Exploiting these tools, the capability of the proposed approach to handle complex aerospace simulation and design problems is tested by computing several flow analysis and design problems.

• 한국인터넷방송통신학회논문지
• /
• 제11권6호
• /
• pp.57-62
• /
• 2011

본 논문에서는 GE 삼각 화를 이용해 LT 부호의 복호 과정을 수행함으로써 복잡도와 오버헤드 성능을 모두 개선한 효율적인 복호 방식을 제안하였다. BP 복호 방식은 간단하고 빠르기는 하나 부호 블록이 짧을수록 복호하는데 큰 오버헤드가 필요하다는 단점이 있고, OFG 알고리즘은 오버헤드는 작으나 연산 양이 많다. 시뮬레이션 결과 제안한 복호 방식은 OFG 알고리즘에 비해 연산 양이 5배 이상 감소되었으며 오버헤드는 1~5%의 적은 양을 보였다.