• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.467-470
• /
• 2011

In this study, two different kind of impeller, commercial hand blender and manual type were used to investigate the most effective mixing method for simulant gel propellant. Ionized Water, Carbopol 941 and NaOH were used to produce the simulant gel for temperature of $25^{\circ}C$ and $50^{\circ}C$. The amount of bubbles produced during mixing of simulant gel at $50^{\circ}C$ were higher than that of simulant gel at $25^{\circ}C$. After 24 hours, bubbles of simulant gel made at $50^{\circ}C$ disappeared rapidly with respect to the bubbles of gel made at $25^{\circ}C$. Bubbles from blender did show notable amount even after 24 hours. Among mixing type, it was found that the pitched paddle impeller was the best candidate for the production of simulant gel.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.30 no.6
• /
• pp.975-980
• /
• 2020

To protect wireless sensor networks (WSNs), various key distribution and management schemes have been proposed. However, most of them conducted simulations and experiments for performance evaluation by considering only the two-dimensional (2D) environments. In this paper, we investigate the effect of real-world three-dimensional (3D) topographic features on the key pre-distribution schemes for WSNs. For this purpose, we analyze and compare the performance of three pairwise key pre-distribution schemes in 2D and 3D environments: full pairwise (FP), random pairwise (RP), and full and random pairwise (FRP) schemes. For the experiments, we employ a network simulator NS-3 and 3D graphic tools such as Blender and Unity. As a result, we confirm that there was a difference in the performance of each scheme according to the actual 3D terrain and that the location-based FRP that considers deployment errors, has the highest efficiency in many aspects.

• Trans-
• /
• v.13
• /
• pp.117-140
• /
• 2022

Recently, artificial intelligence technology is being used throughout the industry. Currently, Currently, AI art generators are used in the NFT industry, and works using them have been exhibited and sold. AI art generators in the art field include Gated Photos, Google Deep Dream, Sketch-RNN, and Auto Draw. AI art generators in the music field are Beat Blender, Google Doodle Bach, AIVA, Duet, and Neural Synth. The characteristics of AI art generators are as follows. First, AI art generator in the art field are being used to create new works based on existing work data. Second, it is possible to quickly and quickly derive creative results to provide ideas to creators, or to implement various creative materials. In the future, AI art generators are expected to have a great influence on content planning and production such as visual art, music composition, literature, and movie.

• Culinary science and hospitality research
• /
• v.20 no.6
• /
• pp.262-274
• /
• 2014

In this study, changes of nutrients such as vitamins, minerals, and antioxidants were determined by using a multi-functional grinder. Contents of vitamin C and vitamin $B_1$ were measured by HPLC, and antioxidant activity was estimated toward free radical scavenging effect in using DPPH. Contents of minerals(Zn, Mn, Fe, Mg, K, and Ca) were computed by ICP-Mass. Results identified that the contents of vitamin C was $44.06{\pm}10.86mg/kg$ in mandarine, $132.1{\pm}22.80mg/kg$ in orange, and $12.79{\pm}2.01mg/kg$ in pineapple by using the hand blender for 3 minutes, and the loss rate of vitamin C contents were 12%, 7%, and 12% in comparison with the control group. In addition, the contents of vitamin C were $41.89{\pm}5.55mg/kg$ in mandarine, $131.51{\pm}12.67mg/kg$ in orange and $16.76{\pm}1.47mg/kg$ in pineapple when using of the grinder for 3 minutes, and the loss rate of vitamin C contents were 16%, 8%, and 17%. The results of vitamin $B_1$ showed a tendency to decrease in the same manner as the content of vitamin C even if there was no significant difference. Furthermore, the result of antioxidant activity revealed that free radical scavenging effect of sample was 60% decreased when using a hand blender and 10% decreased when using a grinder. Thus decrease rate of antioxidant activity when using the hand blender was higher than grinder. Lastly, current study could find any significant differences among the 16 food samples for cooking when employing the multi-functional grinder(p<0.05).

• Advances in aircraft and spacecraft science
• /
• v.5 no.2
• /
• pp.277-294
• /
• 2018

In the space industry, structures undergo several vibration and acoustic tests in order to verify their design and give confidence that they will survive the launch and other critical in-orbit dynamic scenarios. At component level, vibration tests are conducted with the aim to reach local or global interface loads without exceeding the design loads. So, it is often necessary to control and limit the input based on a load criterion. This means the test engineer should be able to assess the interface loads, even when load cannot be measured. This paper presents various approaches to evaluate interface loads using measured accelerations and by referring to mass operators. Various methods, from curve fitting techniques to finite element-based methods are presented. The methods are compared using signals with known imperfection to identify strengths and weaknesses of each mass operator definition.

• Journal of the Korean Society of Industry Convergence
• /
• v.20 no.5
• /
• pp.411-417
• /
• 2017

In this study, Sunroot was used as material in the fermentation process. Sunroot are widely distributed in Korea, The main component is composed of inulin. Fermented vinegar stimulates digestion in the body, as well as to relieve stress is a cause of increasing the neurotransmitter-Serotonin of the body. Therefore, we conducted fermentation studies using sunroot. This research conducted seven days, and the pH and brix value analysis was done every 12 hours during fermentation process. The experimental results show that the fermentation product under blender treatment is better than cutting treatment and without cutting treatment. Initial brix 25% is the best treatment for fermentation because produce fermentation product with a good taste and aroma than other treatment.

• Journal of Environmental Health Sciences
• /
• v.5 no.1
• /
• pp.18-20
• /
• 1978

An experimental study was conducted to determine the quantity of contamination of organophosphrous pesticides accumulated in each human tissues. The samples used for this experiment were spleen, lung, heart, liver and kindney and those tissues were homogenized by a blender. The homogenized materials was extracted with mixed solvent, acetone/benzene (1:1) and cleaned up on a activated carbon column and determined by gas chromatography using AFID supported on 5% QF-1. The average recovery rate was 94% and the results obtained are summarized as follows. 1) The quantities of Malathin accumulated in each tissues were 0.53 ppm in spleen, 0.42 ppm in lung, 0.34 ppm in kidney, 0.19 ppm in heart and 0.19 ppm in liver. 2) Residues of pesticides in chronic or acute intoxicated tissues were highest in the spleen, decreasing in order of the lung, kidney, heart, and liver. 3) According to the above resuk we can conclude that the most proper material in detecting the pesticide is the spleen.

• Tribology and Lubricants
• /
• v.25 no.3
• /
• pp.182-186
• /
• 2009

Extruders can be basically divided into bisk and screw type of extruders. Though plastic extruders are often used for its simplicity for water and oil transportation pumps, these days screw extruders are mostly used. Screws are used in many extrusion processes to manufacture complex and complicated shaped parts made of plastics, medicine materials, food, polymer composites, iron and ceramic powders, etc. Also, material correction of deformities is caused by flow and physicochemical reaction phenomenonand material extrusion is processed according to heat transfer. various material comes to hopper because extruder has function by blender and mixing of materials can go well before come out through dice. These change process is so complicated that process condition is decided by trial and error that process condition is underground mainly at extrusion molding process.

• Journal of Powder Materials
• /
• v.7 no.2
• /
• pp.71-77
• /
• 2000

A process has been successfully used to manufacture 6061/Graphite composite material and the Graphite particles are distributed uniformly within the Al alloy matrix. The 6061 powders was mixed with natural Graphite particles in a ball milling blender and cold compacted specimens were extruded into rods 15mm in diameter at 450$^{\circ}C$. The results showed that tensile properties of the composites with Graphite content have been reduced. The emergence of fine microstructures appeared to be related to the graphite volume. Heat-treated composites were found to possess good mechanical properties as compared with those of non heated composites. A model was used that the tensile strength of the composites would be estimated from the theoretical calculation and experimental data.

• YAKHAK HOEJI
• /
• v.21 no.2
• /
• pp.95-100
• /
• 1977

The effects of the particle size on the homogeneity of mixing and segregation of caffeine-lactose (1:99) mixture were studied. Using the two kinds of caffein, milled and unmilled caffein, V-type blender, the degree of mixing according to the particle size was predicted and the experiment on the change of mixedness by mixing time was carried out by the method derived from mixing index theory by Poole et al. and Hersey. the results could be summarized as follows; (1) The homogeneity of mixing was greatly affected by the particle size and the particle size should be reduced to the adepuate level to attain the desirable mixedness. (2) The homogeneity was not proportional to the mixing time and optimum mixing time for caffein-lactose was about 10 minutes. (3) Segregation tendency was increased by the particle size increase and greatly affected by the flow time in the segregation cell.