• 한국지반공학회논문집
• /
• 제22권8호
• /
• pp.119-127
• /
• 2006

고로 수쇄슬래그는 선철의 제철과정에서 생산되는 부산물로서 자연 해성모래와 유사한 입자형상을 가지고 경량이며 큰 전단강도와 투수성을 나타낸다. 특히, 고로 수쇄슬래그는 시간경과와 더불어 경화하는 잠재수경성을 가진다. 따라서 고로 수쇄슬래그가 안벽이나 옹벽의 뒷채움 재료로 사용 되어졌을 때, 경화에 의한 전단강도의 증가로 토압감소가 기대되며, 결과적으로 항만구조물의 건설비용이 감소하게 된다. 본 연구에서는 모형토조를 이용하여 고로 수쇄슬래그와 Toyoura sand에 대해 토압, 벽 마찰력, 가동벽체 표면에서의 토압분포를 측정하는 모형실험을 실시하였다. 실험에서 상대밀도는 25%, 55% 및 70%로 설정하였으며 벽체는 저점을 중심으로 주동 및 수동토압측으로 회전시켰다. 벽체 상부에서의 최대 수평변위는 ${\pm}2mm$로 설정하였다. 모형실험 결과, 고로 수쇄슬래그에서 얻어진 주동토압이 Toyoura sand보다 작음을 알았다.

• 한국지반공학회논문집
• /
• 제22권8호
• /
• pp.99-106
• /
• 2006

본 연구는 액상화에 대한 고로 수쇄슬래그의 잠재수경성의 영향을 명확히 조사하기 위해 고로 수쇄슬래그를 고온알칼리 수(수산화칼슘 첨가, pH=12, 수온 약 $80^{\circ}C$)로 양생한 후에 반복 및 정적 삼축압축시험을 실시하였다. 삼축시험을 통해 얻어진 결과는 일본의 표준사인 Toyoura sand와 천연사인 Genkai sand의 결과와 비교하였다. 시험결과 고로수쇄슬래그의 액상화 강도는 양생기간의 증가와 더불어 잠재수경성에 의한 경화에 의해 증가함을 알았다. 또한, 담수조건에서 189일간 양생한 상대밀도 50%및 80%의 고로 수쇄슬래그에서 잠재수경성의 발현에 의해 점착력이 나타난다. 더욱이 경화과정에 있어서 고로 수쇄슬래그의 액상화 강도는 반복전단횟수 n=20회에서의 반복응력비 $R_{20}$과 점착력 $C_{d}$사이에 선형 관계가 관찰되었다. 또한, 고온 알칼리 수로 양생된 고로 수쇄슬래그에 대한 액상화 강도는 점착력이나 일축압축강도에 의해 예측이 가능함을 알았다.

• Structural Engineering and Mechanics
• /
• 제51권1호
• /
• pp.1-13
• /
• 2014

This paper reports an experimental study into the rheological behaviour of self consolidating concrete (SCC). The investigation aimed at quantifying the impact of the varying amounts of mineral admixtures on the rheology of SCC containing natural sand. Apart from the ordinary Portland cement (OPC), the cementitious materials such as fly ash (FA), ground granulated blast furnace slag (GGBS) and micro-silica (MS) in conjunction with the mineral admixtures were used in different percentages keeping the mix paste volume and flow of concrete constant at higher atmospheric tempterature ($30^{\circ}$ to $40^{\circ}C$). The rheological properties of SCC were investigated using an ICAR rheometer with a four-blade vane. The rheological properties of self-consolidating concrete (SCC) containing different mineral admixtures (MA) were investigated using an ICAR rheometer. The mineral admixtures were fly ash (FA), ground granulated blast furnace slag (GGBS), and micro silica (MS). The results obtained using traditional workability results are compared with those obtained using ICAR rheometer. The instrument ICAR (International Center for Aggregate Research) rheometer employed in the present study for evaluating the rhelogical behaviour of the SCC is found to detect systematic changes in workability, cementitious materials, successfully. It can be concluded that the rheology and the slump flow tests can be concurrently used for predicting the flow behaviours of SCC made with different cementitious materials.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 추계 학술논문 발표대회
• /
• pp.56-57
• /
• 2016

Recently amongst Korea's construction companies there has been heightened interest in environment load reduction and resource recycling. As a result, the construction industry is examining recycled materials alternative to cement and blast-furnace slag (BS henceforth) cement, such as waste refractories and desulfurized plaster. This study analyzes the liquidity and intensity characteristics of mortar according to changes in replacement ratios of waste refractories and desulfurized plaster, used as industry by-products in mortar environments that use BS 3-type cements and circulated fine aggregate. As a result, the greater the increase in replacement ratios of desulfurized plaster, the greater the increase in liquidity and air quantity, as well as compression strength.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 춘계 학술논문 발표대회
• /
• pp.99-100
• /
• 2012

This study tried to present the appropriate replacement ratio of the recycled sand through the properties of the ternary system inorganic composite mortar according to replacement ratio change of the recycled sand about the natural sand through test verification. The flowing and compressive strength was degraded as the replacement ratio of the experimental result recycled sand increased. The appropriate replacement ratio of the recycled sand according to it was shown up less than 15%.

• 한국세라믹학회지
• /
• 제18권1호
• /
• pp.3-12
• /
• 1981

A glass-ceramics based on blast-furnace slag, with some additives to the theoretical composition in order to control properties of mother glass and the heat treatment conditions, has been investigated. The raw materials in this study were blast-furnace slag, serpentine, feldspar and quartz as mother glass ingredients. Titanium dioxide and chromite were used as the nucleating agents. Batch compositions of the prepared glasses and ceraming conditions were found by trial and error method. The optimum conditions were confirmed by analyzing several measured physical properties such as density change during heat treatment, microhardness of slag-ceramics prepared, viscosity change of glass at heat treatment temperatures, nucleation density change, dilatometric properties, differential thermal analysis, identification of the grown crystal and crystal sizes. The batch composition feasible to prepare slag-ceramics was 40% of blast-furnace slag, 25% of serpentine, 18% of feldspar and 17% of silica sand. Three percent titanium dioxide and 1% chromite of the mother glass were added as nucleating agents. The ceraming conditions under which the slag-ceramics having considerably good properties can be developed found as: "The glass was heated at 75$0^{\circ}C$ for 2 hours for nucleation, and the temperature was raised up to 1, 00$0^{\circ}C$ with a rate of 0.75$^{\circ}C$/min for crystal growth.owth.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.453-458
• /
• 2001

This study was performed to reuse the dyeing wastewater sludge treated by Fenton process through the solidification/stabilization technique. To solidify the dyeing sludge the industrial by-products such as blast furnace slag, fly ash and waste sand with cement were used. The laboratory scale and pilot scale test were conducted at room temperature to make construction brick which has high compressive strength and low leaching of heavy metals. The experimental results showed that blast furnace slag and fly ash could be used instead of cement and the products satisfied the regulation of Korean Standards. The blast furnace slag increased the compressive strength and the optimum ratio of slag/dyeing sludge on dry basis was found 0.4. The solidifying agent of SB series could increase rapidly the compressive strength and the optimum ratio of solidifying agent/sludge on dry basis was 0.26 at which the strength was two times compared with non-added condition. The portion of waste and industrial by-products in matrix was over 80%. From the pilot test the optimum pressure in molding was 100kg/$\textrm{cm}^2$ at which the compressive strength was over 100kg/$\textrm{cm}^2$. And the strength increased continuously to 160kg/$\textrm{cm}^2$ until 120 days curing time due to pozzolanic reaction. When SB-20 as a solidifying agent was used, the unconfined compressive strength of dyeing sludge could be obtained 110kg/$\textrm{cm}^2$ which satisfied the regulation of cement brick in Korea Standard(KS).

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.107-110
• /
• 1999

The objective of this study is to obtain characteristics of early age pore-structure and carbonation of concrete using ground granulated blast furnace slag (GGBFS). The durability of GGBFS concrete should be evaluated for wide use of the GGBFS. As for that evaluation, an analysis on early age pore-structure characteristics of GGBFS concrete are very important, Carbonation depths of GGBFS concrete, which are known to be larger than that of OPC, are different according to replacement ratios and fineness of slag. Because sea sand as fine aggregate is much used recently, it is also necessary to analyze characteristics of carbonation of GGBFS concrete. In this study, The micro-pore structure formation characteristics of GGBFS concrete are obtained through the test of GGBFS mortars with different fineness and replacement ratio of GGBFS. The carbonation of GGBFS concrete is also investigated by acclerated carbonation test for early age GGBFS concrete.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 춘계 학술논문 발표대회 1부
• /
• pp.63-64
• /
• 2011

This study is about the mortar in which fine aggregate is substituted by low-carbon eco-friendly inorganic composite prepared by addition of alkali accelerator in industrial by-products such as blast furnace slag, red mud and silica fume as a replacement for cement. Results of experiments on flow and strength properties in mortar of inorganic composite according to replacement rate of fine aggregate showed that amount of air and table flow decreased as replacement rate of fine aggregate about inorganic composite got higher. Also, it's shown that the compressive strength was the highest at replacement rate 50% of fine aggregate about inorganic composite.

• 한국지반신소재학회논문집
• /
• 제18권1호
• /
• pp.67-77
• /
• 2019

그라우팅 공법은 연약지반의 보강과 방수 및 지하수위저하 또는 상승과 진동으로 인한 침하 및 부등침하로 손상된 구조물의 지지력을 높이고 차수를 목적으로 하는데 사용된다. 본 연구는 아라미드 섬유를 이용하여 그라우트재료의 압축강도를 향상시키고, 고로슬래그 미분말을 이용하여 높은 강도의 지반개량공법을 개발하는데 있다. 따라서 본 연구에서는 시멘트와 고로슬래그미 분말의 비는 100:0, 70:30, 40:60%로 고치환(50%이상)까지 확인하고, 아라미드 혼입률은 시멘트와 고로슬래그 중량의 0, 0.5, 1.0%로 증가시켜 첨가하였으며, 표면의 유제처리 비율을 0.7과 1.2%로 샌드겔을 성형하여 일축압축시험을 수행하였다. 환경성 평가는 중금속용출시험과 pH 측정을 수행하였다. 실험결과 아라미드 섬유 1%첨가 시 일축압축강도는 약 1.3배 정도 강도가 증가하였고, 6가크롬은 고로슬래그 미분말이 30% 증가할수록 중금속 용출은 약 50% 감소하였으나, pH용출시험결과, 고로슬래그 미분말이 30% 증가할수록 pH는 약 0.5 증가하는 경향을 나타났다. 향후 pH에 대한 부분은 보완이 필요할 것으로 판단된다.