• Journal of the Semiconductor & Display Technology
• /
• v.21 no.4
• /
• pp.92-98
• /
• 2022

This paper proposes a new method of the traffic signal detection and the recognition in an HSI color model. The proposed method firstly converts a ROI image in the RGB model to in the HSI model to segment the color of a traffic signal. Secondly, the segmented colors are dilated by the morphological processing to connect the traffic signal light and the signal light case and finally, it extracts the traffic signal light and the case by the aspect ratio using the connected component analysis. The extracted components show the detection and the recognition of the traffic signal lights. The proposed method is implemented using C language in Raspberry Pi 4 system with a camera module for a real-time image processing. The system was fixedly installed in a moving vehicle, and it recorded a video like a vehicle black box. Each frame of the recorded video was extracted, and then the proposed method was tested. The results show that the proposed method is successful for the detection and the recognition of traffic signals.

• Journal of Advanced Information Technology and Convergence
• /
• v.9 no.1
• /
• pp.115-125
• /
• 2019

In this paper, the image is received from the camera and the lane is sensed. There are various ways to detect lanes. Generally, the method of detecting edges uses a lot of the Sobel edge detection and the Canny edge detection. The minimum use of multiplication and division is used when designing for the hardware configuration. The images are tested using a black box image mounted on the vehicle. Because the top of the image of the used the black box is mostly background, the calculation process is excluded. Also, to speed up, YCbCr is calculated from the image and only the data for the desired color, white and yellow lane, is obtained to detect the lane. The median filter is used to remove noise from images. Intermediate filters excel at noise rejection, but they generally take a long time to compare all values. In this paper, by using addition, the time can be shortened by obtaining and using the result value of the median filter. In case of the Sobel edge detection, the speed is faster and noise sensitive compared to the Canny edge detection. These shortcomings are constructed using complementary algorithms. It also organizes and processes data into parallel processing pipelines. To reduce the size of memory, the system does not use memory to store all data at each step, but stores it using four line buffers. Three line buffers perform mask operations, and one line buffer stores new data at the same time as the operation. Through this work, memory can use six times faster the processing speed and about 33% greater quantity than other methods presented in this paper. The target operating frequency is designed so that the system operates at 50MHz. It is possible to use 2157fps for the images of 640by360 size based on the target operating frequency, 540fps for the HD images and 240fps for the Full HD images, which can be used for most images with 30fps as well as 60fps for the images with 60fps. The maximum operating frequency can be used for larger amounts of the frame processing.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.465-468
• /
• 2014

The image processing device sold by the market, which increases the comfort of the driver Around-View of the camera. This system while driving or when parked, came about to prevent accidents caused by driver error or disable the visibility of the system. However, it did not spread widely to the driver due to the problem of the high installation cost and complex installation process from the system for easy operation. Due to problems such as first, expensive equipment and second, the development environment is difficult and third, inconvenient installation process, it is not out because of the prohibitively high cost burden and difficult development environment, programmers and operators. I think if this is solved even one problem of this system would be able to access the user are a little more affordable. In this paper The AVM(Around-View Monitoring) system is proposed, the two problems that minimize expensive equipment, the installation process is inconvenient problem of the three aforementioned systems. Solved the problem caused by a lot of the cost by using low-cost USB device, and a rear camera. Was developed to facilitate the installation is possible by considering the inconvenient installation. Reducing the price paid by consumers because of the system.

• The Journal of the Korea Contents Association
• /
• v.20 no.10
• /
• pp.1-13
• /
• 2020

There are many factors that influence the image quality of CMOS camera images, among which the image exposure time is an important factor. If the image exposure time is long, the entire image on the screen becomes brighter. If the exposure time is shorter, the entire image becomes darker. When photographing a still image, real time is not required because the automatic exposure system is given sufficient time to obtain an appropriate exposure time. However, if the surroundings and environment change rapidly like the black box of a driving car, the exposure time should be applied in response to real time. To this end, a robust automatic exposure system for real-time performance and ambient light environment is required. An automatic exposure system that has real-time capability and is robust against the ambient light environment is required. we designed a real-time control sysem capable of parallel operation processing through the design of an embedded system using zynq's logic and ARM core, and developed a real-time CMOS automatic exposure system that is robust to noise and converges to a desired target value within 66 ms through PID control.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.2
• /
• pp.114-123
• /
• 2014

Vehicle Black Box (Event Data Recorder EDR) only recognizes the general surrounding environments of load. In addition, general EDR is difficult to recognize the images of a sudden illumination change. It appears that the lens is being a severe distortion. Therefore, general EDR does not provide the clues of the circumstances of the accident. To solve this problem, we estimate the value of Normalized Luminance Descriptor(NLD) and Normalized Contrast Descriptor(NCD). Illumination change is corrected using Normalized Image Quality(NIQ). Second, we are corrected lens distortion using model of Field Of View(FOV) based on designed method of fisheye lens. As a result, we propose integration algorithm of two methods that correct distortions of images using each Gamma Correction and Lens Correction in parallel.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.4
• /
• pp.104-114
• /
• 2016

Potholes have caused diverse problems such as wheel damage and car accident. A pothole detection technology is the most important to provide efficient pothole maintenance. The previous pothole detections have been performed by manual reporting methods. Thus, the problems caused by potholes have not been solved previously. Recently, many pothole detection systems based on video cameras have been studied, which can be implemented at low costs. In this paper, we propose a new pothole detection algorithm based on saliency map information in order to improve our previously developed algorithm. Our previous algorithm shows wrong detection with complicated situations such as the potholes overlapping with shades and similar surface textures with normal road surfaces. To address the problems, the proposed algorithm extracts more accurate pothole regions using the saliency map information, which consists of candidate extraction and decision. The experimental results show that the proposed algorithm shows better performance than our previous algorithm.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.12
• /
• pp.123-129
• /
• 2014

In accordance with the development of various convergence devices, cameras are being used in many types of the systems such as security system, driver assistance device and so on, and a lot of people are exposed to these system. Therefore the system should be able to recognize the human behavior and support some useful functions with the information that is obtained from detected human behavior. In this paper we use a machine learning approach based on 2D image and propose the human behavior pattern recognition methods. The proposed methods can provide valuable information to support some useful function to user based on the recognized human behavior. First proposed one is "phone call behavior" recognition. If a camera of the black box, which is focused on driver in a car, recognize phone call pose, it can give a warning to driver for safe driving. The second one is "looking ahead" recognition for driving safety where we propose the decision rule and method to decide whether the driver is looking ahead or not. This paper also shows usefulness of proposed recognition methods with some experiment results in real time.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.11
• /
• pp.2753-2758
• /
• 2014

Around-View, the image processing device which increases the comfort of drivers is sold in the market. This system prevents accidents in advance while driving or parking. The accidents are caused with their inexperienced driving or bad visibility. It is developed for driving convenience. However, it dosen't spread to the driver widely due to the problem of the high installation costs and complex installation process. First, expensive equipment second, difficult development environment and third, inconvenient installation procedure. So the drivers don't have many opportunities to use this system and dare to develop this system. I think if one of the problems can be solved, users might be able to access this system at low cost. In this paper, the AVM(Around-View Monitoring) minimizes two of them. Expensive equipment, inconvenient installation. The costly problems were solved by using low-cost USB device and rear cameras. In view of inconvenient installation process, the new system was designed to make it easy for people to install it. Through this, it can ease the burden of consumers.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.2
• /
• pp.263-267
• /
• 2015

current mine detector can't division the section if it is conducted and it needs too much labor force and time. in addition to, if the user don't move the head of sensor in regular speed or move it too fast, it is hard to detect a mine exactly. according to this, to improve the problem using one direction ultrasonic wave sensing signal, that is made up of human body antenna part, main micro processor unit part, smart glasses part, body equipped LCD monitor part, wireless data transmit part, belt type power supply part, black box type camera, Security Communication headset. the user can equip this at head, body, arm, waist and leg in removable type. so it is able to detect the powder in a 360-degree on(under) the ground whether it is metal or nonmetal and it can express the 2D or 3D film about distance, form and material of the mine. so the battle combats can avoid the mine and move fast. also, through the portable battery and twin self power supply system of the power supply part, combat troops can fight without extra recharge and we can monitoring the battle situation of distant place at the command center server on real-time. and then, it makes able to sharing the information of battle among battle combats one on one. as a result, the purpose of this study is researching a smart wearable mine detector which can establish a smart battle system as if the commander is in the site of the battle.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.10a
• /
• pp.562-565
• /
• 2022

Recently, the increasing number of overloaded vehicles on the road poses a risk to traffic safety, such as falling objects, road damage, and chain collisions due to the abnormal weight distribution, and can cause great damage once an accident occurs. However, this irregular weight distribution is not possible to be recognized with the current weight measurement system for vehicles on roads. To address this limitation, we propose to build an object detection-based AI model to identify overloaded vehicles that cause such social problems. In addition, we present a simple yet effective method to construct an object detection model for the large-scale vehicle images. In particular, we utilize the large-scale of vehicle image sets provided by open AI-Hub, which include the overloaded vehicles from the CCTV, black box, and hand-held camera point of view. We inspected the specific features of sizes of vehicles and types of image sources, and pre-processed these images to train a deep learning-based object detection model. Finally, we demonstrated that the detection performance of the overloaded vehicle was improved by about 23% compared to the one using raw data. From the result, we believe that public big data can be utilized more efficiently and applied to the development of an object detection-based overloaded vehicle detection model.