• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.243-246
• /
• 2008

목질계 바이오매스 가스화 발전에 있어서는 가스화 가스중에 함유되어있는 타르를 가능한 한 가연성 가스로 전환하여 냉가스효율을 향상시키는 것 및 잔유하는 타르는 후단기기에 악영향을 초래할 우려가 있기 때문에 타르를 저감 제거하는 것이 바람직하다. 본 연구에서는 공기 수증기를 사용하여 타르개질 프로세스의 개선을 위해서 타르에서 가스성분으로의 전환에 관한 개질 실험을 실시하여 Wood chip 타르의 열분해 개질 생성물 거동에 대하여 검토하였다. Wood chip 열분해로 생성된 타르의 원소분석 및 $^1H$ NMR분석의 결과로 타르를 치환기를 가지지 않는 방향족, alkyl-기를 가지는 방향족, 산소 함유 방향족, 지방족의 4개로 분류하였다. 개질제에 의해 경질 타르, 중질 타르 모두 감소하였다. 개질 공기는 타르를 연소시키지만 그 속도는 가연성 가스와 경합하고 $900^{\circ}C$에서는 타르의 연소는 나타나지 않았다. alkyl-기를 가지는 방향족은 메탄과 치환기를 가지지 않는 방향족으로 전환되고, 치환기를 가지지 않는 방향족은 수소와 soot로 전환되고, 산소 함유 방향족은 일산화탄소와 치환기를 가지지 않는 방향족으로 전환되는 것을 알았다. 또한, 개질제에 의해alkyl-기를 가지는 방향족, 치환기를 가지지 않는 방향족, 산소 함유방향족 모두가 일산화탄소,이산화탄소로 전환되는 것을 알았다.

• Resources Recycling
• /
• v.15 no.1 s.69
• /
• pp.12-19
• /
• 2006

Rice straw is one or the main renewable energy sources in Korea. Bio-oil is produced from rice straw with a lab-scale equipment mainly with a fluidized bed and a char removal system. It was investigated how the reaction temperature affected the production of bio-oil and the efficiency of a char removal system. To elucidate how the temperature depended on the production of bio-oil, experiments were conducted at $466^{\circ}C,\;504^{\circ}C\;and\;579^{\circ}C$, respectively. The mass balance was established in each experiment, and the produced gas and oil were analyzed with the aid of GCs and a GC-MS system. The char removal system is composed of a cyclone and a hot filter. Tn the experiments, we observed that the production of bio-oil was decreased with temperature, and the bio-oil contained very useful chemicals.

• Microbiology and Biotechnology Letters
• /
• v.41 no.2
• /
• pp.176-182
• /
• 2013

Several types of mesoporous alumina adsorbents with different physical properties were prepared by spray pyrolysis and were used for the separation/purification of the anticancer agent paclitaxel. The pore diameter of the adsorbents had a greater effect than did the surface area and the pore volume on the removal of plant-derived impurities. An appropriate pore diameter (~10.8 nm) was required for effective impurity removal. At a constant pore diameter, the surface area of the adsorbent affected not only the purity but also the yield of paclitaxel. Also, increasing the surface area of the adsorbent resulted in an increase in the adsorption of paclitaxel and impurities (biomass-derived tar and wax components). Removal of these impurities was confirmed by HPLC analysis of the absorbent after the treatment and TGA of the organic substances that were bound to the adsorbent.

• Journal of Hydrogen and New Energy
• /
• v.29 no.6
• /
• pp.559-569
• /
• 2018

Catalytic supports made of carbon have many advantages, such as high coking resistance, tailorable pore and surface structures, and ease of recycling of waste catalysts. Moreover, they do not require pre-reduction. In this study, ash-free coal (AFC) was obtained by the thermal extraction of carbonaceous components from raw coal and its performance as a carbon catalytic support was compared with that of well-known activated carbon (AC). Nickel was dispersed on the carbon supports and the resulting catalysts were applied to the steam reforming of toluene (SRT), a model compound of biomass tar. Interestingly, nickel catalysts dispersed on AFC, which has a very small surface area (${\sim}0.13m^2/g$), showed higher activity than those dispersed on AC, which has a large surface area ($1,173A/cm^2$). X-ray diffraction (XRD) analysis showed that the particle size of nickel deposited on AFC was smaller than that deposited on AC, with the average values on AFC ${\approx}11nm$ and on AC ${\approx}23nm$. This proved that heteroatomic functional groups in AFC, such as carboxyls, can provide ion-exchange or adsorption sites for the nano-scale dispersion of nickel. In addition, the pore structure, surface morphology, chemical composition, and chemical state of the prepared catalysts were analyzed using Brunauer-Emmett-Taylor (BET) analysis, transmission electron microscopy (TEM), scanning electron microscopy (SEM), x-ray diffraction (XRD), Fourier-transform infrared (FT-IR) spectroscopy, and temperature-programmed reduction (TPR).