• KSBB Journal
• /
• 제19권5호
• /
• pp.390-393
• /
• 2004

Oxygen uptake rate (OUR) was used as an indicator of microbial activity. In this study OUR at dyeing wastewater in the pilot plant was monitored to examine biological activity. Correlation between inlet COD concentration and maximum OUR showed that maximum OUR was proportional to inlet COD concentration. Changes in the OUR values reflected the changing waste load in the reactor. Consequently, OUR can be used to estimate biological activity of inlet COD concentration. This study showed that biodegradable COD at dyeing wastewater could be calculated from OUR and yield coefficient. Non-biodegradable COD was able to be calculated from a difference between initial COD concentration and biodegradable COD.

• 품질경영학회지
• /
• 제42권2호
• /
• pp.165-177
• /
• 2014

Purpose: This study analyzes the strategical priority to improve eco-labelling certification system, focused on biodegradable resin. Methods: This study will come up with measures to operate the eco-Label certification system related to biodegradable products more effectively and efficiently by discovering various problems related to the system, using causal loop diagram and AHP analysis. Results: This study shows that the government should play more important role while firms could also serve their roles in the initial and stabilizing stages of the eco-labelling certification system, in order to vitalize the eco-Label certification system more effective. Conclusion: This study addresses strategic eco-labelling policies on governmental and firm's operation and providers guidance to practitioners in addressing strategic decision relating to eco-labelling certification system.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.374-375
• /
• 2006

The purpose of this paper is to investigate the propriety of biodegradable polymer pad in spite of exchanging from existing polyurethane pad used in CMP(Chemical Mechanical Planarization). Poli 400 of G&P Technology for CMP and Ellipsometer of Rudolph AutoEL-III for measurement were used in this experiment. From this experiment, it is proven that the biodegradable polymer pad is sufficiently suitable in CMP process. Therefore, it is expected that, by using the biodegrable pad CMP manufacturing process, and will be decreased. Especially, wafer scratch can be decreased.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.355-355
• /
• 2006

In this study, we have applied principal component analysis-based 2D (PCA2D) correlation spectroscopy to the temperature-dependent IR spectra of biodegradable poly(hydroxyalkanoate). PCA2D analysis reveals clearly that there are two components in crystalline band of C=O stretching mode without being hampered by noise. To better understand the thermal behavior of biodegradable poly(hydroxyalkanoate), eigenvalue manipulating transformation (EMT) technique was also employed. By uniformly lowering the power of a set of eigenvalues associated with the original data, the subtle contributions from minor eigenvectors are highlighted. Details of thermal behavior of biodegradable poly(hydroxyalkanoate) studied by PCA2D correlation spectroscopy with EMT will be discussed.

• 펄프종이기술
• /
• 제42권2호
• /
• pp.75-81
• /
• 2010

Characteristics of mixing biodegradable polymers and polymer impregnated paper for mulching mat for seedling were investigated. The mixed film of 70% PLA was most easily biodegradable. The surface of polymer films were changed to more rough due to enzymatic degradation of lipase. Tensile strength and breaking elongation of PLA mixed films were increased to the 0.04-0.31 kN/m and the 0.17-0.96%, respectively. With higher PLA contents, intensities of ester originated carboxyl group(about $1,748cm^{-1}$) were increased. Physical properties of prepared mulching mats were increased with PLA contents and stiffness of mulching mat was not so much changed.

• 한국환경과학회지
• /
• 제14권10호
• /
• pp.973-978
• /
• 2005

Biodegradable oil gelling agent was prepared, and their oil absorption capacities using light oil, lubricant oil and corn oil were investigated. The result showed that the oil absorption capacity was depended on the amount of surfactant and starch added, and was increased in the order of light oil, lubricant oil and corn oil. Also, the oil-absorption capacity was saturated within 30 min at $18^{\circ}C$. The biodegradability of the prepared biodegradable oil gelling agent was also studied by determination of reduced sugar produced after enzymatic hydrolysis. Their surface morphologies and thermal properties of the prepared biodegradable oil gelling agent were observed by scanning electron microscopy (SEM) and thermogravimetric analysis (TGA), respectively.

• 산업기술연구
• /
• 제16권
• /
• pp.51-60
• /
• 1996

This research was performed for the fundamental data using a advanced treatment process of piggery wastewater. Characteristics of influent wastewater was divided with various methods in fixed biofilm batch reasctor. Fractons of organic were divided into readily biodegradable soluble COD(Ss), slowly biodegradable COD(Xs), nonbiodegradable soluble COD($S_I$), and nonbiodegradable suspended COD($X_I$). Experimental results were summerized as following : i) biodegradable organics fraction in piggery wastewater was about 88.1 percent, and fraction of readily biodegradable soluble COD was about 66.1 percent. ii) Fractions of nonbiodegradable soluble COD was 11~12 percent, and soluble inert COD by metabolism was producted about 6~8 percent. iii) Active biomass fraction of attached biofilm was about 54.7 percent, and substrate utilization rate and maximum specific growth rate of heterotrophs were $8.315d^{-1}$ and $3.823d^{-1}$, respectively.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.147-148
• /
• 2006

A research on scaffold fabrication has been progressed in many research groups. However, the mechanical properties of existing biodegradable materials are still not satisfactory. But, PPF (poly (propylene fumarate)) has a good mechanical property in comparison to other biodegradable materials. Nevertheless, the viscosity of the synthesized PPF is too high to fabricate structures using micro-stereolithography. Therefore, the viscosity of the resin was made low by adding the diethyl fumarate and this material could be used in micro-stereolithography apparatus. Then, a photoinitiator was added for photo crosslinking of the DEF/PPF resin. 2.5D and 3D scaffolds were fabricated our system and curing characteristics of the resin were analyzed through the experiment.

• Journal of Pharmaceutical Investigation
• /
• 제25권3호
• /
• pp.223-226
• /
• 1995

A new method to study water uptake into biodegradable polymer was developed. Polymer was gently mixed with the tritiated buffer and the radioactivity level of the polymer due to water uptake was measured by liquid scintillation counting. The rate of water uptake was estimated from the plot of the amount of water in the device as a function of time. The technique used in this study is particularly useful for estimating water uptake of biodegradable polymers which were difficult to study by other techniques such as weight gain used for hydrogel.

• 한국응용과학기술학회지
• /
• 제16권1호
• /
• pp.67-73
• /
• 1999

Chitosan and Algin are known as a natural polymers. Biodegradable films were prepared by solution blend method in the weight ratio of natural polymer(low, medium, high-Chitosan, Algin) for the purpose of useful bioimplants. The possibility of bioimplants, which were prepared from natural polymers as a skin substitute and food wrapping materials were evaluated by measuring biodegradability. This biodegradable films were inserted in the back of rats and their biodegradability was investigated by hematological change evaluation as a function of time to biotransformation. It was found that these values of biodegradable films give some good results with short period test.