• Animal Bioscience
• /
• 제36권7호
• /
• pp.1044-1058
• /
• 2023

Objective: The objective of this study was to characterize physiochemical and nutrient profiles of feedstock and co-products from canola bio-oil processing that were impacted by source origin. The feedstocks and co-products (mash, pellet) were randomly collected from five different bio-oil processing plants with five different batches of samples in each bio-processing plant in Canada (CA) and China (CH). Methods: The detailed chemical composition, energy profile, total digestible nutrient (TDN), protein and carbohydrate subfractions, and their degradation and digestion (CNCPS6.5) were determined. Results: The results showed that TDN_1x was similar in meals between CA and CH. CH meals and feedstock had higher, truly digestible crude protein (tdCP) and neutral detergent fiber (tdNDF) than CA while CA had higher truly digestible non-fiber carbohydrate (tdNFC). The metabolizable energy (ME_3x), net energy (NE_Lp3x, NE_m3x, and NE_g3x) were similar in meals between CA and CH. No differences were observed in energy profile of seeds between CA and CH. The protein and carbohydrate subfractions of seeds within CH were similar. The results also showed that pelleting of meals affected protein sub-fractionation of CA meals, except rapidly degradable fractions (PB1), rumen degradable (RDPB1) and undegrdable PB1 (RUPB1), and intestinal digestible PB1 (DIGPB1). Canola meals were different in the soluble (PA2) and slowly degradable fractions (PB2) between CA and CH. The carbohydrate fractions of intermediately degradable fraction (CB2), slowly degradable fraction (CB3), and undegradable fraction (CC) were different among CH meals. CH presented higher soluble carbohydrate (CA4) and lower CB2, and CC than CA meals. Conclusion: The results indicated that although the seeds were similar within and between CA and CH, either oil-extraction process or meal pelleting seemed to have generated significantly different aspects in physiochemical and nutrient profiles in the meals. Nutritionists and producers need to regularly check nutritional value of meal mash and pellets for precision feeding.

• 유기물자원화
• /
• 제16권4호
• /
• pp.57-63
• /
• 2008

본 연구에서는 돈분을 이용한 열분해공정(pyrolysis)에 의한 바이오오일의 특성을 분석하여 보고하였다. 기본적으로 bio-oil 생산을 위한 pilot auger형 반응기는 $400^{\circ}C{\sim}600^{\circ}C$의 고온을 유지하였다. 바이오오일의 특성은 수질분석, 열량가, 원소분석, GC/MS를 이용한 마이오일의 원소, $^1H$ NMR분광기에 의한 functional group 구명 등을 포함한다. 돈분시료를 이용한 바이오오일 생산량은 pilot auger 반응기의 온도가 $550^{\circ}C$일 때 바이오일 생산율은 질량의 21%로서 최대를 나타내었다. 이 결과는 본 연구에서 연속 auger형 반응기의 이송이 편리하고 bio-oil 생산량이 적지 않아 대체 축분처리기술의 하나로 검토할 수 있음을 보였다. 그러나 auger 반응기의 원료로의 열전도가 유동상 반응조보다 낮아서 향후 이를 개선하기 위한 연구가 성공적으로 수행되면 바이오오일 생산량을 제고시킬 수 있을 것으로 판단된다.

• Journal of the Korean Wood Science and Technology
• /
• 제40권6호
• /
• pp.445-453
• /
• 2012

본 연구에서는 백합나무의 급속 열분해 공정에서 시료의 입자크기 및 함수율 조건이 열분해 산물(가스, 바이오오일, 바이오촤)의 수율과 물리 화학적 특성에 미치는 영향을 구명하였다. 시료의 함수율이 낮을수록 바이오오일의 수율은 증가하였으며 시료의 입자 크기는 수율 변화에 큰 영향을 미치지 않았다. 각 조건별로 생성된 바이오오일은 20~30%의 수분 함량과 pH 2.2~2.4, 발열량 16.6~18.5 MJ/kg의 수준을 나타내었으며 바이오오일 내 수분 함량은 높은 함수율 시료 조건에서 증가하는 것을 확인하였다. 바이오촤의 경우 80% 이상이 탄소로 이루어져있으며 발열량은 26.2~30.1 MJ/kg 수준으로 측정되었다.

• Animal Bioscience
• /
• 제36권3호
• /
• pp.451-460
• /
• 2023

Objective: This program aimed to reveal the association of feed intrinsic molecular structure with nutrient supply to animals from canola feedstocks and co-products from bio-oil processing. The special objective of this study was to quantify the relationship between molecular spectral feature and nutrient availability and develop nutrient prediction equation with vibrational molecular structure spectral profiles. Methods: The samples of feedstock (canola oil seeds) and co-products (meals and pellets) from different bio-oil processing plants in Canada (CA) and China (CH) were submitted to this molecular spectroscopic technique and their protein and carbohydrate related molecular spectral features were associated with the nutritional results obtained through the conventional methods of analyses for chemical and nutrient profiles, rumen degradable and intestinal digestible parameters. Results: The results showed that the spectral structural carbohydrates spectral peak area (ca. 1,487.8 to 1,190.8 cm^-1) was the carbohydrate structure that was most significant when related to various carbohydrate parameters of canola meals (p<0.05, r>0.50). And spectral total carbohydrate area (ca. 1,198.5 to 934.3 cm^-1) was most significant when studying the various carbohydrate parameters of canola seeds (p<0.05, r>0.50). The spectral amide structures (ca. 1,721.2 to 1,480.1 cm^-1) were related to a few chemical and nutrient profiles, Cornell Net Carbohydrate and Protein System (CNCPS) fractions, truly absorbable nutrient supply based on the Dutch protein system (DVE/OEB), and NRC systems, and intestinal in vitro protein-related parameters in co-products (canola meals). Besides the spectral amide structures, α-helix height (ca. 1,650.8 to 1,643.1 cm^-1) and β-sheet height (ca. 1,633.4 to 1,625.7 cm^-1), and the ratio between them have shown to be related to many protein-related parameters in feedstock (canola oil seeds). Multi-regression analysis resulted in moderate to high R² values for some protein related equations for feedstock (canola seeds). Protein related equations for canola meals and carbohydrate related equations for canola meals and seeds resulted in weak R² and low p values (p<0.05). Conclusion: In conclusion, the attenuated total reflectance Fourier transform infrared spectroscopy vibrational molecular spectroscopy can be a useful resource to predict carbohydrate and protein-relates nutritional aspects of canola seeds and meals.

• 공업화학
• /
• 제24권6호
• /
• pp.579-586
• /
• 2013

화석 연료의 고갈 및 온실가스 배출문제로 인해 보다 환경 친화적인 바이오매스 유래의 고분자 생산에 대한 연구가 진행되고 있다. 폴리우레탄은 -OH 화합물과 -NCO 화합물의 중합반응에 의해 생성된 우레탄(-NHCOO-) 결합을 포함하는 고분자 화합물을 통칭하며 자동차, 건축, 화학 분야에서 가장 광범위하게 사용된다. 폴리우레탄의 원료인 폴리올과 이소시아네이트는 식물성 천연유지, 셀룰로오스, 리그닌 등 재생 가능한 바이오매스로부터 생산이 가능하다. 식물성 천연유지 유래의 바이오폴리올은 이미 상업적 규모로 생산되고 있다. 본 총설은 다양한 바이오매스로부터 바이오폴리올, 바이오이소시아네이트, 이소시아네이트 대체화합물 관련 최신 기술개발 동향 및 이를 기반으로 합성된 바이오폴리우레탄의 특성을 평가하고, 바이오폴리우레탄의 응용분야와 함께 전망을 분석하였다.

• Journal of Microbiology
• /
• 제42권1호
• /
• pp.51-55
• /
• 2004

The influence of feedstock amino acids, salt, carbon and nitrogen sources on glutathione production by Saccharomyces cerevisiae FF -8 was investigated. Glucose, yeast extract, KH$_2$PO$_4$, and L-cysteine were found to be suitable feedstock. Highest glutathione production was obtained after cultivation with shaking for 72 h in a medium containing glucose 3.0% (w/v), yeast extract 3.0%, KH$_2$PO$_4$ 0.06% and L-cysteine 0.06%. The glutathione concentration achieved using this medium increased 2.27-fold to 204 mg/l compared to YM basal medium.

• Animal Bioscience
• /
• 제36권2호
• /
• pp.256-263
• /
• 2023

Objective: Feed molecular structures can affect its availability to gastrointestinal enzymes which impact its digestibility and absorption. The molecular spectroscopy-attenuated total reflectance Fourier transform infrared vibrational spectroscopy (ATR-FTIR) is an advanced technique that measures the absorbance of chemical functional groups on the infrared region so that we can identify and quantify molecules and functional groups in a feed. The program aimed to reveal the association of intrinsic molecular structure with nutrient supply to animals from canola feedstocks and co-products from bio-oil processing. The objective of this study was to characterize special intrinsic carbohydrate and protein-related molecular structure spectral profiles of feedstock and co-products (meal and pellets) from bio-oil processing from two source origins: Canada (CA) and China (CH). Methods: The samples of feedstock and co-products were obtained from five different companies in each country arranged by the Canola Council of Canada (CCC). The molecular structure spectral features were analyzed using advanced vibrational molecular spectroscopy-ATR-FTIR. The spectral features that accessed included: i) protein-related spectral features (Amide I, Amide II, α-helix, β-sheet, and their spectral intensity ratios), ii) carbohydrate-related spectral features (TC1, TC2, TC3, TC4, CEC, STC1, STC2, STC3, STC4, TC, and their spectral intensity ratios). Results: The results showed that significant differences were observed on all vibrationally spectral features related to total carbohydrates, structural carbohydrates, and cellulosic compounds (p<0.05), except spectral features of TC2 and STC1 (p>0.05) of co-products, where CH meals presented higher peaks of these structures than CA. Similarly, it was for the carbohydrate-related molecular structure of canola seeds where the difference between CA and CH occurred except for STC3 height, CEC and STC areas (p>0.05). The protein-related molecular structures were similar for the canola seeds from both countries. However, CH meals presented higher peaks of amide I, α-helix, and β-sheet heights, α-helix:β-sheet ratio, total amide and amide I areas (p<0.05). Conclusion: The principal component analysis was able to explain over 90% of the variabilities in the carbohydrate and protein structures although it was not able to separate the samples from the two countries, indicating feedstock and coproducts interrelationship between CH and CA.

• Journal of the Korean Wood Science and Technology
• /
• 제35권1호
• /
• pp.1-10
• /
• 2007

최근 미국 에너지 시장에서 수송용 바이오연료 생산과 바이오매스자원으로부터의 원료공급 가능성 등에 대하여 조사 연구되었다. 미국의 국가에너지정책의 1차 목표는 수입원유에 대한 의존을 줄이고 다양한 국내자원으로 에너지생산을 증가시키는 것으로 2030년에는 현재 수송용 에너지의 20%를 바이오연료로 대체할 목표이다. 정책적으로 청정공기법령(Clean Air Act), 연방청정연료(Federal Clean Fuel) 프로그램 및 American Jobs Creation Act를 통하여 바이오연료 사용을 증가시키는 노력을 하고 있다. 에너지 원료로서 산림바이오매스는 년간 3억 6800만 dry tons, 농업에서 얻어지는 원료는 현재의 BT기술을 이용한 작물품종 및 경작기술 개발, 농지사용 변화를 기반으로 했을 때 년 간 총 9억 9800만 dry tons이고 이중에서 목질계 바이오매스는 8억 1800만 dry tons이다 현재의 농업상황에서 생산되는 량의 5배에 해당하는 바이오매스 공급가능성이 예측되었다.

• 한국수소및신에너지학회논문집
• /
• 제26권5호
• /
• pp.484-492
• /
• 2015

As our government is actively introducing the RPS (Renewable Portfolio Standards) as a national renewable energy obligation policy, power producers are using the various renewable energy to meet the RPS supply quota since 2012. Recently, it is appling to use power bio-fuel oil in bio-fuel oil demonstration project with power companies. In general, power bio-fuel oils are composed of mixture products of vegetable oil, animal fat, fatty acid ester and waste oil. It is already developing for a power plant as a renewable energy abroad. In Korea, it is studying a 100% combustion and blended combustion of heavy fuel oil and bio-fuel oil. In this study, we investigated fuel characteristics of mixed power bio-fuel oil and its emission performance. Especially, it was reduced emissions of bio-oil in industrial boilers due to bio-fuel properties as compare with fuel oil.

• Korean Chemical Engineering Research
• /
• 제61권4호
• /
• pp.591-597
• /
• 2023

Pakistan depends heavily on imports for its fuel requirements. In this experiment, catalytic pyrolysis of a blend of feedstock's consisting of date seed, wheat straw, and corn cob was conducted in a fixed bed reactor to produce oil that can be used as an alternative fuel. The main focus was to emphasize the outcome of important variables on the produced oil. The effects of operating conditions on the yield of bio-oil were studied by changing temperature (350-500 ℃), heating rate (10, 15, 20 ℃/min), and particle size (1, 2, 3 mm). Moreover, ZnO was used as a catalyst in the process. First, the thermal degradation of the feedstock was investigated by TGA and DTG analysis at 10 ℃/min of different particle sizes of 1, 2, and 3mm from a temperature range of 0 to 1000 ℃. The optimum temperature was found to be 450 ℃ for maximum degradation, and the oil yield was indicated to be around 37%. It was deduced from the experiment that the maximum production of bio-oil was 32.21% at a temperature of 450 ℃, a particle size of 1mm, and a heating rate of 15 ℃/min. When using the catalyst under the same operating conditions, the bio-oil production increased to 41.05%. The heating value of the produced oil was 22 MJ/kg compared to low-quality biodiesel oil, which could be used as a fuel.