• 한국대기환경학회지
• /
• 제9권3호
• /
• pp.191-199
• /
• 1993

This paper describes the results of a systematic study to determine the characteristics of particle generated from various types of asbestos containing material(ACM) and manmade fiber material(MMFM) during operations of cutting and grinding in laboratory and workplace. Tests were conducted with a specially designed glove box which allowed complete sampling of the generated asbestos fibers. Specificially, air measurements were made during ACM and MMFM installation in building. All personal air samples collected were identified by polarized light microscopy(PLM), X-ray diffraction(XRD) and scanning electron microscope with energy dispersive X-ray analysis(SEM/EDXA). Also, the samples were counted by phase contrast microscope(PCM) in order to compare the results with the permissible exposure standard for workplace. Results indicate that the characterisitcs of fibers found in the roofing sheet, the ceiling and the wall insulation boards were identical to those of asbestos, while the characteristics of fibers found in the ceiling insulation board, the floor tile and the sprayed on insulation products in parking area were identical to those of asbestos, while the characteristics of fibers found in the ceiling insulation board, the floor tile and the sprayed on insulation products in parking area were identical to those of rock wool. The concentrations of airborne fibers from various building materials cut by a grinder for 5 minutes were in the ranges of 0.09 $\sim$ 1.71 fibers/cc(f/cc). The highest concentration(1.71f/cc) was found during grinding the wall insulation board which also contains rock wool. The airborne fiber concentrations generated by installing at workplace were ranged from 0.0009 to 0.029 f/cc. All asbestos fibers from the ceiling insulation board at workplace were less than 20$\mu$m in length and more than 20% of them had the average aspect ratio greater than 20. Therefore, for the purpose of decreasing asbestos and man-made fiber concentrations at the workplace, the ceiling and wall board should use strong binding material to increase the binding force with fiber. Also, the permissible exposure standard for workplace(2.0f/cc) in Korea should be constituted below the maximum avaiable concentration measured at glove box.

• 한국염색가공학회지
• /
• 제25권4호
• /
• pp.254-261
• /
• 2013

In this study, we synthesized a new fluorescent polypyridyl dye 2 containing a 2,2'-bipyridine in the center and two 2,2':6',2"-terpyridines at both ends. When exposed to various metal ions, the dye 2 showed selective fluorescence responses. In the presence of $Cu^{2+}$ and $Ni^{2+}$, it exhibited a highly effective fluorescence quenching, leading to large $K_{sv}$ values of up to $10^5$. In response to most other metal ions including $Al^{3+}$, in contrast, its fluorescence changes little, showing a small Ksv value at $10^2$. Meanwhile, the compound 2 revealed a differentiated fluorescence response to $Zn^{2+}$, which is evidenced by a large red shift of > 100 nm. Such a red shift from the ion binding is attributed to the planarization of the bipyridyl unit extending the effective conjugation length in conjunction. A polypyridyl compound will find important usefulness in chemosensor application due to its selective binding to metal ions. Subsequent research concerned with modified derivatives is currently going on, as a way to provide high solubility even after metal-complexing.

• Journal of Microbiology and Biotechnology
• /
• 제30권2호
• /
• pp.178-186
• /
• 2020

Licorice (Glycyrrhiza uralensis) contains several compounds that have been reported to alleviate menopausal symptoms via interacting with estrogen receptors (ERs). The compounds exist mainly in the form of glycosides, which exhibit low bioavailability and function. To bioconvert liquiritin and isoliquiritin, the major estrogenic compounds, to the corresponding deglycosylated liquiritigenin and isoliquiritigenin, respectively, licorice was fermented with Monascus, which has been demonstrated to deglycosylate other substances. The contents of liquiritigenin and isoliquiritigenin in Monascus-fermented licorice increased by 10.46-fold (from 38.03 μM to 379.75 μM) and 12.50-fold (from 5.53 μM to 69.14 μM), respectively, compared with their contents in non-fermented licorice. Monascus-fermented licorice exhibited 82.5% of the ERβ binding activity of that observed in the positive control (17 β-estradiol), whereas the non-fermented licorice exhibited 54.1% of the binding activity in an in vivo ER binding assay. The increase in the ERβ binding activity was associated with increases in liquiritigenin and isoliquiritigenin contents. Liquiritigenin acts as a selective ligand for ERβ, which alleviates menopausal symptoms with fewer side effects, such as heart disease and hypertension, compared with a ligand for ERα. In addition, Monascus-fermented licorice contained 731 mg/kg of monacolin K, one of the metabolites produced by Monascus that reduces serum cholesterol. Therefore, Monascus-fermented licorice is a promising material for the prevention and treatment of menopausal syndrome with fewer side effects.

• Advances in nano research
• /
• 제7권3호
• /
• pp.209-221
• /
• 2019

Graphene, with impressive electronic properties, have high potential in the microelectronic field. However, graphene itself is a zero bandgap material which is not suitable for digital logic gates and its application. Thus, much focus is on graphene nanoribbons (GNRs) that are narrow strips of graphene. During GNRs fabrication process, the occurrence of defects that ultimately change electronic properties of graphene is difficult to avoid. The modelling of GNRs with defects is crucial to study the non-idealities effects. In this work, nearest-neighbor tight-binding (TB) model for GNRs is presented with three main simplifying assumptions. They are utilization of basis function, Hamiltonian operator discretization and plane wave approximation. Two major edges of GNRs, armchair-edged GNRs (AGNRs) and zigzag-edged GNRs (ZGNRs) are explored. With single vacancy (SV) defects, the components within the Hamiltonian operator are transformed due to the disappearance of tight-binding energies around the missing carbon atoms in GNRs. The size of the lattices namely width and length are varied and studied. Non-equilibrium Green's function (NEGF) formalism is employed to obtain the electronics structure namely band structure and density of states (DOS) and all simulation is implemented in MATLAB. The band structure and DOS plot are then compared between pristine and defected GNRs under varying length and width of GNRs. It is revealed that there are clear distinctions between band structure, numerical DOS and Green's function DOS of pristine and defective GNRs.

• Transactions on Electrical and Electronic Materials
• /
• 제15권6호
• /
• pp.305-308
• /
• 2014

Organosilyl-modified and star-shaped poly (${\varepsilon}$-caprolactone) (m-PCL) was prepared, and added to polymethylsilsesquioxane (PMSSQ), to make composites. The end groups of m-PCL are chemically similar to PMSSQ, and m-PCL mixed well with PMSSQ in the composite. Porous PMSSQ film was made by further calcination of the composite film at elevated temperature. m-PCL-templated PMSSQ and the as-prepared porous PMSSQ were structurally, optically, and thermally characterized in thin films. The chemical binding of m-PCL and PMSSQ effectively suppressed the phase separation of PMSSQ and m-PCL during the curing process. After calcination at elevated temperature, there remained many pores in the PMSSQ matrix. The refractive indices of the resulting porous PMSSQ thin films decreased with increase of the film porosities, depending on the initial m-PCL loadings.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.219-219
• /
• 2010

In a past, the method in which it used the fluorescent material or it analyzes a gene was used in order to detect the Alzheimer's disease. However, in this paper, the magnetic bead is used in order to detect the Alzheimer's disease. The 'magnetic bead used in this paper is able to make the amyloid-beta and the selective binding known as cause of the Alzheimer's disease.

• 한국소음진동공학회논문집
• /
• 제23권4호
• /
• pp.365-371
• /
• 2013

The purpose of this study is to develop a sound absorbing material for indoor which manufactured by a clay and binding material. The seven kind of sound absorbing specimens which sintered through a mold process at high temperature were manufactured for the purpose of testing sound absorption performance. The random and normal sound absorption coefficients were measured for the sintered clay sound absorbing specimens with different particle size, density and mixture ratio. From the experimental results, it was found that its particle size was closely related to the sound absorption performance. It was shown that the sintered clay sound absorbing specimen had the sound absorption properties of a fiber-type or a resonance-type sound absorbing material depending on the particle size.

• 복식문화연구
• /
• 제14권6호
• /
• pp.1042-1055
• /
• 2006

The purpose of this study is to consider the formative characteristics of dance sports from such points of view as shapes, colors, material and decorations, and to examine artistic characteristics that are expressed through those elements. As a result, this study shows five artistic characteristics as follows; First, rhythmic characteristic is expressed with repeat of lines that is formed by pleats, shirring or gather, with duplication of ruffle's wave, with gradation of colors, with Moire-effect that is generated with overlap of see-through material, with glossy material that reflects lights to a great extent, with fringe. Second, bodily characteristic emphasizes the beauty of human bodies through direct or indirect body exposure by way of cut-and-open, see-throughness or close adhesion. Third, decorative characteristic is shown with beads, fringe, ruffle, embroidery, shirring, binding, or feather. Fourth, the beauty of female body is manifested to express eroticism, which is culminated by body exposure, body consciousness, use of illuminating or see-through material or colorful trimming. Finally, elegant characteristic is revealed through feminity, sophistication, and harmony that are expressed with black and white colors, see-through material, or bead trimmings.

• 한국식품과학회지
• /
• 제29권3호
• /
• pp.417-426
• /
• 1997

미강을 혈중 콜레스테롤 저하 효과가 있는 기능성 식품소재의 원료로 활용하는 데 필요한 기초 자료를 얻기 위하여 미강 단백질의 가수 분해물을 제조하여 담즙산 결합 획분을 분리하고 일부 물리화학적 특성을 조사하였다. 미강 단백질을 탈지 미강으로부터 알칼리 추출과 등전점 침전 방법을 이용하여 제조하였다. 미강 단백질을 기질로 하여 pH-drop method로 측정한 효소의 상대적 활성과 가수분해시 가수분해율의 변화를 비교 평가하여 기질의 가수분해에 적합한 효소를 선택하였다. Esperase에 의한 가수분해물을 한외여과(MWCO : 10 kDa)하여 두 부분으로 나누었다. 각 분획물을 cholic acid를 공유결합 시킨 ${\omega}-aminohexyl$ Sepharose 4B column에 걸어, 소수성 상호작용에 의해 cholic acid와 결합하는 폴리펩티드 및 펩티드를 deoxycholate 완충용액으로 용출시켜 분리하였다. 겔투과 크로마토그래피(Sephadex G-50)를 이용하여 한외여과 여과백의 담즙산 결합물에 대해 분자량 분포를 측정한 결과, 대부분 $2\;kDa{\sim}10\;kDa$에 걸쳐 넓게 분포하였고 일부는 $0.2\;kDa{\sim}0.6\;kDa$사이에 존재하였다. 한외여과 잔류액의 담즙산 결합물에 대해서는 preparative reverse phase HPLC를 실시하여 미강 단백질 가수분해물에서 3개(R-1, 2, 3)의 Peak를 분리하였다. 각 peak의 총 아미노산과 유리 아미노산 조성을 분석하여 단백질, 폴리펩티드 및 펩티드 부분의 아미노산 조성을 조사하였다. 그 결과 미강 단백질 가수분해물에서 얻은 peak의 경우 proline 함량이 미강 단백질의 4배에 달했고, 평균 소수도가 높은 peak일수록 유리 아미노산이 함량이 높았으며 평균 소수도는 미강 단백질보다 다소 높은 것으로 나타났다.

• Transactions on Electrical and Electronic Materials
• /
• 제16권2호
• /
• pp.103-105
• /
• 2015

Effect of silicon doping into ZnSnO systems was investigated using solution process. Addition of silicon was used to suppress oxygen vacancy generation. The transfer characteristics of the device showed threshold voltage shift toward the positive direction with increasing Si content due to the high binding energy of silicon atoms with oxygen. As a result, the carrier concentration was decreased with increasing Si content.