• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.5
• /
• pp.1-6
• /
• 2008

LCD multimedia system is necessary to display and transfer the effective image informations. However, this system uses several LCD screens, so the problem of gap between the LCD screens occurs. In order to solve this problem, this paper presents a method of using binary Fresnel lens. This kind of binary fresnel lens makes each screen enlarge and minimize the gap. The optimization of design parameters of binary Fresnel lens is presented.

• Fire Science and Engineering
• /
• v.22 no.4
• /
• pp.65-69
• /
• 2008

An accurate knowledge of the flash point is important in developing appropriate preventive and control measures in industrial fire protection. The lower flash points for the n-propanol+formic acid system were measured by Pensky-Martens closed cup apparatus. This binary mixture exhibited MFPB (minimum flash point behavior), which leads to the minimum on the flash point vs composition curve. The Raoult's law and optimization method using Wilson equation were used to predict the lower flash points and were compared with experimental data. The calculated values based on the optimization method were found to be better than those based on the Raoult's law.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.28 no.3
• /
• pp.149-155
• /
• 2005

In this paper, we optimize simulation model of a manufacturing system using the real-coded genetic algorithm. Because the manufacturing system expressed by simulation model has stochastic process, the objective functions such as the throughput of a manufacturing system or the resource utilization are not optimized by simulation itself. So, in order to solve it, we apply optimization methods such as a genetic algorithm to simulation method. Especially, the genetic algorithm is known to more effective method than other methods to find global optimum, because the genetic algorithm uses entity pools to find the optimum. In this study, therefore, we apply the real-coded genetic algorithm to simulation optimization of a manufacturing system, which is known to more effective method than the binary-coded genetic algorithm when we optimize the constraint problems. We use the reproduction operator of the applied real-coded genetic algorithm as technique of the remainder stochastic sample with replacement and the crossover operator as the technique of simple crossover. Also, we use the mutation operator as the technique of the dynamic mutation that configures the searching area with generations.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.240-245
• /
• 1990

A on-line optimization scheme based on model in a binary distillation process is proposed. A reduced-order model utilized the concept of collocation is used as a process model and the recursive prediction error method is employed to identify the reduced-order model. The concentrations of end products are controlled by nonlinear adaptive predictive control algorithm. The objective function is constructed to find optimum operate condition for saving utility cost. The proposed optimization is scheme is tested through simulation studies in 13-staged water-methanol distillation column.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.4 no.5
• /
• pp.896-909
• /
• 2010

IEEE 802.11 medium access control (MAC) employs the distributed coordination function (DCF) as the fundamental medium access function. DCF operates with binary exponential backoff (BEB) in order to avoid frame collisions. However it may waste wireless resources because collisions occur when multiple stations are contending for frame transmissions. In order to solve this problem, a binary negative-exponential backoff (BNEB) algorithm has been proposed that uses the maximum contention window size whenever a collision occurs. However, when the number of contending stations is small, the performance of BNEB is degraded due to the unnecessarily long backoff time. In this paper, we propose the adaptive BNEB (A-BNEB) algorithm to maximize the throughput regardless of the number of contending stations. A-BNEB estimates the number of contending stations and uses this value to adjust the maximum contention window size. Simulation results show that A-BNEB significantly improves the performance of IEEE 802.11 DCF and can maintain a high throughput irrespective of the number of contending stations.

• Journal of the Korea Society for Simulation
• /
• v.26 no.1
• /
• pp.39-46
• /
• 2017

An arrangement of passive sonars is considered to be a fixed underwater surveillance system for detecting an anti-submarine consistently. An effectiveness score for optimizing the arrangement of passive sonars is defined in a function of the probability of detection and localization. These two features contain various probabilistic variations including seasons, sea states, depths of water, etc. Due to this reason, the effectiveness scores show probabilistic characteristics from the input of the arrangement of passive sonars. This paper defines the optimization problem having the results of probabilistic characteristics from various parameters of input conditions. Also, we suggest a simulation-based process of deciding the optimized arrangement of passive sonars using DPSO(Discrete binary version of PSO) method.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.2
• /
• pp.580-590
• /
• 2018

Active distribution system (ADS) considering distributed generation (DG) and electric vehicle (EV) is an effective way to cut carbon emission and improve system benefits. ADS is an evolving, complex and uncertain system, thus comprehensive model and effective optimization algorithms are needed. Battery swapping station (BSS) for EV service is an essential type of flexible load (FL). This paper establishes ADS planning model considering BSS firstly for the minimization of total cost including feeder investment, operation and maintenance, net loss and carbon tax. Meanwhile, immune binary firefly algorithm (IBFA) is proposed to optimize ADS planning. Firefly algorithm (FA) is a novel intelligent algorithm with simple structure and good convergence. By involving biological immune system into FA, IBFA adjusts antibody population scale to increase diversity and global search capability. To validate proposed algorithm, IBFA is compared with particle swarm optimization (PSO) algorithm on IEEE 39-bus system. The results prove that IBFA performs better than PSO in global search and convergence in ADS planning.

• Korean Journal of Optics and Photonics
• /
• v.33 no.6
• /
• pp.267-274
• /
• 2022

In this paper, we report the design and fabrication of binary diffractive optical elements (DOEs) for random-dot-pattern projection for Schlieren imaging. We selected the binary phase level and a pitch of 10 ㎛ for the DOE, based on cost effectiveness and ease of manufacture. We designed the binary DOE using an iterative Fourier-transform algorithm with binary phase optimization. During initial optimization, we applied a computer-generated pseudorandom dot pattern of uniform intensity as a target pattern, and found significant intensity nonuniformity across the field. Based on the evaluation of the initial optimization, we weighted the target random dot pattern with Gaussian profiles to improve the intensity uniformity, resulting in the improvement of uniformity from 52.7% to 90.8%. We verified the design performance by fabricating the designed binary DOE and a beam projector, to which the same was applied. The verification confirmed that the projector produced over 10,000 random dot patterns over 430 mm × 430 mm at a distance of 5 meters, as designed, but had a slightly less uniformity of 84.5%. The fabrication errors of the DOE, mainly edge blurring and spacing errors, were strong possibilities for the difference.

• Korean Management Science Review
• /
• v.28 no.2
• /
• pp.53-62
• /
• 2011

The objective of this paper is to propose a Binary Particle Swarm Optimization(BPSO) for design of reporting cell management system. The assignment of cells to reporting or non-reporting cells is an NP-complete problem having an exponential complexity in the Reporting Cell Location Management(RCLM) system. The number of reporting cells and which cell must be reporting cell should be determined to balance the registration(location update) and search(paging) operations to minimize the cost of RCLM system. Experimental results demonstrate that BPSO is an effective and competitive approach in fairly satisfactory results with respect to solution quality and execution time for the optimal design of location management system.

• Journal of Information Processing Systems
• /
• v.13 no.2
• /
• pp.268-284
• /
• 2017

The dorsal hand vein biometric system developed has a main objective and specific targets; to get an electronic signature using a secure signature device. In this paper, we present our signature device with its different aims; respectively: The extraction of the dorsal veins from the images that were acquired through an infrared device. For each identification, we need the representation of the veins in the form of shape descriptors, which are invariant to translation, rotation and scaling; this extracted descriptor vector is the input of the matching step. The optimization decision system settings match the choice of threshold that allows accepting/rejecting a person, and selection of the most relevant descriptors, to minimize both FAR and FRR errors. The final decision for identification based descriptors selected by the PSO hybrid binary give a FAR =0% and FRR=0% as results.