• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.4
• /
• pp.28-39
• /
• 1993

In the international BISDN used satellite, the laser that has large BW has to be used as a carrier for transmitting a lot of visual, vocal, and data information. Interoptical satellite communication has now developed in theoretical and practical aspects. But the optical communication, between satellite and earth station, is hindered by atmospheric absorption, scattering, and turbulence. In this paper, it was supposed that 1Gbps information was transmitted by binary FSK and 50mW AlGaAs semiconductor laser was used as a optical source in the satellite communication link between geosynchronous orbit satellite and earth station. We analyzed the BER and the entire diameter of the noncoherently combined optical heterodyne receiver as el evation angle, and determined the number of the optical heterodyne rece ivers, which is necessary for the BER of the receiver to be less than 10$^{-9}$ by computer simulation under the clear weather condition. It is shown that the BER and the number of the optical heterodyne receivers decrease as the elevation angle increases. In the region used the same number of the optical heterodyne receivers, it is shown that the entire diameter of the receiver increases but the BER decreases as the elevation angle increases.

• Journal of the Institute of Convergence Signal Processing
• /
• v.10 no.4
• /
• pp.289-293
• /
• 2009

This study proposes a novel double-base log encoder (DBLE) for flash Analog-to-Digital converters (ADCs). Analog inputs of flash ADCs are represented in logarithmic number systems with bases of 2 and 3 at the outputs of DBLE. A look up table stores the sets of exponents of base 2 and 3 values. This algorithm improves the performance of a DSP (Digital Signal Processor) system that takes outputs of a flash ADC, since the double-base log number representation does multiplication operation easily within negligible error range in ADC. We have designed and implemented 6 bits DBLE implemented with ROM (Read-Only Memory) architecture in a $0.18\;{\mu}m$ CMOS technology. The power consumption and speed of DBLE are better than the FAT tree and binary ROM encoders at the cost of more chip area. The DBLE can be implemented into SoC architecture with DSP to improve the processing speed.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.3
• /
• pp.1-9
• /
• 1995

In the B-ISDN using satellite between geo-satellites and earth stations, the laser having high security and broad band width has to be used as a carrier for transmitting massive information of visual, vocal, and high rate data. In this paper, by computer simulation we analyzed the number of optical detector array of optical satellite communication downlink in case of using channel coding and no channel coding for BISDN between geo-satelites and earth stations under clear weather condition. It was supposed that 1 watt semiconductor laser was used and as modulation method, the binary FSK was used. The data rate of 10Gbps was used for B-ISDN. Also, hardly affected by atmospheric absorption 1.55$\mu$m wave-length was used to reduce influence of dispersion and chirp generated at a high speed transmission. We analyzed the received power, SNR and BER. The number of optical detector array was determined to satisfy for the BER less than 10$^{-7}$. Also, we ananlyzed the possibility of reducting the number of optical detector array in case of using channel coding. the number of optical detector array is one in the region where the elevation nangle is between 38$^{\circ}$ and 90$^{\circ}$ and two where the elevation angle is between 33$^{\circ}$ and 37$^{\circ}$ and three where the elevation angle is between 30$^{\circ}$ and 32$^{\circ}$ and increases per one as the elevation angle decreases per 1.deg.. So in the region where the elevation angle is 25$^{\circ}$, the number of optical detector arrays is eight. In case of using channel coding, the number of optical detector arrays decreases to five in the region where the elevation angle is 25$^{\circ}$. Therefore, we remaark the advantage of the channelcoding to decrease the size of received antenna and the number ob optical detector arrays.

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.35T no.3
• /
• pp.46-52
• /
• 1998

In this paper, after inputting the computer with the attached number plate on the vehicle, using it, the color decomposition method and back propagation neural network proposed the extractable method of the vehicle number plate at high speed. This method separated R, G, B signal form input moving vehicle image to computer through video camera, then after transform this R, G, B signal into input image data of the computer by using color depth of vehicle number plate and store up binary value in the memory frame buffer. After adapting character's recognition algorithm, also improving this, by adapting back propagation neural network makes the vehicle number plate recognition system. Also minimalizing the similar color's confusion, adapting horizontal and vertical extracting algorithm by using the vehicle's rectangular architecture shows the extract and character's recognition of the vehicle number plate at high speed.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.5 s.37
• /
• pp.333-342
• /
• 2005

This paper proposes a method, which recognizes student's identification card by using image processing and recognition technology and can manage student information on the web. The presented scheme sets up an average brightness as a threshold, based on the brightest Pixel and the least bright one for the source image of the ID card. It is converting to binary image, applies a horizontal histogram, and extracts student number through its location. And, it removes the noise of the student number region by the mode smoothing with 3$\times$3 mask. After removing noise from the student number region, each number is extracted using vertical histogram and normalized. Using the enhanced ART1 algorithm recognized the extracted student number region. In this study, we propose the enhanced ART1 algorithm different from the conventional ART1 algorithm by the dynamical establishment of the vigilance parameter. which shows a tolerance limit of unbalance between voluntary and stored patterns for clustering. The Experiment results showed that the recognition rate of the proposed ART1 algorithm was improved much more than that of the conventional ART1 algorithm. So, we develop an educational matters administration system by using the proposed recognition method of the student's identification card.

• Smart Media Journal
• /
• v.4 no.4
• /
• pp.18-23
• /
• 2015

In this paper, we propose a method for detecting the number of clusters. This method can improve the performance of a gaussian mixture model function in conventional markov random field method by using the tensor voting. The key point of the proposed method is that extracts the number of the center through the continuity of saliency map of the input data of the tensor voting token. At first, we separate the foreground and background region candidate in a given natural images. After that, we extract the appropriate cluster number for each separate candidate regions by applying the tensor voting. We can make accurate modeling a gaussian mixture model by using a detected number of cluster. We can return the result of natural binary text image by calculating the unary term and the pairwise term of markov random field. After the experiment, we can confirm that the proposed method returns the optimal cluster number and text binarization results are improved.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.2
• /
• pp.268-275
• /
• 2020

A lightweight hardware design of self-timed ring based true random number generator (TRNG) suitable for information security applications is described. To reduce hardware complexity of TRNG, an entropy extractor with feedback structure was proposed, which minimizes the number of ring stages. The number of ring stages of the FSTR-TRNG was determined to be a multiple of eleven, taking into account operating clock frequency and entropy extraction circuit, and the ratio of tokens to bubbles was determined to operate in evenly-spaced mode. The hardware operation of FSTR-TRNG was verified by FPGA implementation. A set of statistical randomness tests defined by NIST 800-22 were performed by extracting 20 million bits of binary sequences generated by FSTR-TRNG, and all of the fifteen test items were found to meet the criteria. The FSTR-TRNG occupied 46 slices of Spartan-6 FPGA device, and it was implemented with about 2,500 gate equivalents (GEs) when synthesized in 180 nm CMOS standard cell library.

• Journal of KIISE:Computer Systems and Theory
• /
• v.36 no.2
• /
• pp.73-86
• /
• 2009

This paper proposes a new data hiding scheme for binary image authentication with minimizing the distortion of host image. Based on the Hamming-Code-Based data embedding algorithm, the proposed scheme makes it possible to embed authentication information into host image with only flipping small number of pixels. To minimize visual distortion, the proposed scheme only modifies the values of the flippable pixels that are selected based on Yang et al's flippablity criteria. In addition to this, by randomly shuffling the bit-order of the authentication information to be embedded, only the designated receiver, who has the secret key that was used for data embedding, can extract the embedded data. To show the superiority of the proposed scheme, the two measurement metrics, the miss detection rate and the number of flipped pixels by data embedding, are used for the comparison analysis between the proposed scheme and the previous schemes. As a result of analysis, it has been shown that the proposed scheme flips smaller number of pixels than the previous schemes to embed the authentication information of the same bit-length. Moreover, it has been shown that the proposed scheme causes smaller visual distortion and more resilient against recent steg-analysis attacks than the previous schemes by the experimental results.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.12
• /
• pp.1891-1904
• /
• 2013

In RFID System, one of the problem that we must slove is to devise a good anti-collision algorithms to improve the efficiency of tag identification which is usually low because of tag collision. Among of the existing RFID anti-collision algorithm, BS (Binary Search) algorithm, though simple, has a disadvantage that the stage 0f times used to identify the tags increase exponentially as the number of tags does. In this Paper, I propose a new anti-collision algorithm called Multi-collision reflected frame which restricts the number of stages and decided bit. Since the proposal algorithm keep the length size of UID and density of total tag when have 100%.

• Journal of Electrical Engineering and Technology
• /
• v.2 no.3
• /
• pp.312-319
• /
• 2007

The solution of the power flow is one of the most important problems in electrical power systems. These traditional methods such as Gauss-Seidel method and Newton-Raphson (NR) method have had drawbacks up to now such as initial values, abnormal operating solutions and divergences in heavy loads. In order to overcome theses problems, the power flow solution incorporating genetic algorithm (GA) is introduced in this paper. General operator of genetic algorithm, arithmetic crossover, and non-uniform mutation operator of GA are suggested to solve the power flow problem. While abnormal solution cannot be obtained by a NR method, multiple power flow solution can be obtained by a GA method. With a heavy load, both normal solution and abnormal solution can be obtained by a proposed method. In this paper, a floating number representation instead of the binary number representation is introduced for accuracy. Simulation results have been compared with traditional methods.