• 한국해양학회지
• /
• 제30권1호
• /
• pp.1-12
• /
• 1995

한반도 남해 대륙붕의 표층퇴적물 216개에 대한 모드분석을 실시하였다. 수심 7 0~100 m에 분포하는 사니질 또는 니사질 혼합퇴적물은 복모드형(모래요소와 뺄요소) 을 나타낸다. 분리한 요소의 조직변수들은 현재 천해저 퇴적물에서 이미 인정된 입도 조직변수간의 상관관계와 잘 일치한다. 복모드형 가운데 모래요소의 특징은 다음과 같 다: (1) 모래요소의 평균입도, 분급도, 패각편 함량 분포는 등수심선과 유청사한 방향 으로 반복성을 보인다. (2) 모래요소는 다량의 패각편, 약간의 잔자갈과 산화된 석영 (iron-stained quartz)을 포함하는 중립 또는 세립다(Mz, 1-3$\psi$)로 구성되어 있다. (3) 석영 (quartz)입자의 표면에는 높은 에너지 환경에서 형성된 조가비 모양 (conchoidal breakage feature), "V"자형구조(V-shaped feature)가 잘 발달하고 있다. (4) CM-pattern에서 뺄요소는 uniform suspension 구간에 도시되었다. 이러한 특징들 은 섬진강으로부터 기원된 세립질 부유퇴적물이 대부분 단모드 뺄형분포해역에 퇴적되 었으며, 더욱 세립한 뺄요소가 외해로 이동되고, 해안전면퇴적물의 특징을 보이는 모 래 요소와 혼합된 것임을 지시한다. 해수면 상승으로 인한 퇴적환경 변화는 대륙붕퇴 적물에 많은 영향을 주었으며, 입도분포는 환경변화를 반응하고 있다, 복모드는 보이 는 대륙붕퇴적물의 퇴적환경 규명은 모드를 분리하고 각 모드의 환경을 추적하는 것이 타당하다는 결론을 얻었다.는 결론을 얻었다.

• 한국전산구조공학회논문집
• /
• 제23권1호
• /
• pp.45-52
• /
• 2010

본 논문에서는 새로운 차량의 도입으로 건설되는 신형식 교량의 동적거동을 확인하기 위해 상용 유한요소 프로그램을 이용하여 해석을 실시하여 충격계수를 산정하였으며, 국내뿐만 아니라 각국에서 적용되고 있는 충격계수에 관한 설계기준을 조사하여 비교 검토하였다. 연구에서 제시되어진 교량형식은 파이프트러스 형식으로 각각 34m, 44m, 54m로 모델링하였으며 각각의 지간길이에 따른 충격계수의 영향을 산정하였다. 차량모델은 실제 교량 위를 통과하는 2축과 3축 저상굴절차량과 박영석(1997)이 제시한 147kN 덤프트럭 모델을 적용하였으며, 각 차량별로 10km/h~100km/h까지의 속도대역에 따른 충격계수를 산정하여 이에 따른 영향을 검토하였다. 또한 차량 및 지간길이에 따라 산정되어진 지간 중앙에서의 충격계수를 바탕으로 우리나라 및 외국의 설계규정과 비교 검토하였다.

• 한국해양공학회지
• /
• 제27권5호
• /
• pp.63-69
• /
• 2013

The mooring lines of a floating type offshore plant are known to show wide banded and bimodal responses. These phenomena come from a combination of low and high frequency random load components, which are derived from the drift-restoring motion characteristic and wind- sea, respectively. In this study, fatigue models were applied to predict the fatigue damage of mooring lines under those loads, and the result were compared. For this purpose, seven different fatigue damage prediction models were reviewed, including mathematical formula. A FPSO (floating, production, storage, and offloading) with a $4{\times}4$ spread catenary mooring system was selected as a numerical model, which was already installed at an offshore area of West Africa. Four load cases with different combinations of wave and wind spectra were considered, and the fatigue damage to each mooring line was estimated. The rain flow fatigue damage for the time process of the mooring tension response was compared with the results estimated by all the fatigue damage prediction models. The results showed that both Benasciutti-Tovo and JB models could most accurately predict wide banded bimodal fatigue damage to a mooring system.

• Bulletin of the Korean Chemical Society
• /
• 제23권6호
• /
• pp.872-879
• /
• 2002

One of the improtant characteristics of core-shell type nanoparticles is the long-term storage and reuse as an aqueous injection solution when required. For this reason, reconstruction of lyophilized core-shell type nanoparticles is considered to be essential . BAB type triblock copolymers differ from AB type diblock copolymers, which contain the A block as a hydrophilic part and the B block as a hydrophobic part. by not being easily redistributed into phosphate-buffered saline (PBS, pH 7.4, 0.1 M). Therefore, lyophilized core-shell type nanoparticles of CEC triblock copolymer were reconstituted using a somication process with a bar-type sonicator in combination with a freezing-thawing process. Soncation for 30s only resuspended CEC nanoparticles in PBS; their particle size distribution showed a monomodal pattern with narrow size distribution. The bimodal size distribution pattern and the aggregates were reduced by further sonication for 120 s but these nanoparticles showed a wide size distribution. The initial burst of drug release was increased by reconstitution process. The reconstitution of CEC core-shell type nanoparticles by freezing-thawing resulted in trimodal distribution pattern and formed aggregates, although freezing-thawing process was easier than sonication . Drug release form CEC nanoparticles prepared by freezing-thawing was slower than from the original dialysis solution. Although core-shell typenanoparticles of CEC triblock copolymers were not easily performed. Cytotoxicity testing of core-shell type nanoparticles of CEC-2 triblock copolymers containing clonazepam (CNZ) was performed using L929 cells. Cytotoxicity of CNZ was decreased by incorporation into nanoparticles.

• 한국재료학회지
• /
• 제4권6호
• /
• pp.626-637
• /
• 1994

Ti-6Ai-4V 합금의 미세조직을 용체화처리온도 및 냉각속도만의 변화로서 Widmanstatten 조직과 이중조직을 얻은 후 이들 미세조직과 인장성질고의 비교. 검토를 통해서 최적 열처리 방안을 설정하고자 하였다. 그 결과 Widmanstatten 조직에 있어서는 열처리온도나 냉각속도에 따라 복잡하고 무질서한 dege형상의 $\alpha$상 및 등축화된 $\alpha$상으로변화시킬 수 있었으며, $\alpha$+$\beta$ 영역에서 2중 용체화 처리의 경우 1차 및 2차 용체화처리 온도가 낮을수록 aspect비는 작아짐을 알 수 있었다. 인장성질에 있어서 Widmanstatten 조직은 이중조직에 비해 강도는 감소하고 연성성질 또한 크게 감소하였으며, 파단양상 Widmanstatten 조직의 경우 준벽개와 dimple형 파단양상이 함께 나타나는 반면 이중조직은 연성파괴를 나타내었다. 또한 이중조직의 파단면을 인장축에 수직인 내부균열영역과 45˚ 정도의 전단각을 갖는 shear lip영역으로 나누어 관찰할 수 있었다.

• 천문학회지
• /
• 제29권1호
• /
• pp.63-73
• /
• 1996

The previous study of chemical evolution of the Galaxy is extended to the radial properties of the Galactic disk. The present model includes radial dependency of the time-dependent bimodal IMF, radial flow of material in the disk, and the change of type I supernova explosion rate with radial distance from the disk center as model parameters and observed gas and stellar density distributions and metallicity abundance gradient as observational constraints. The results of two models in this study explain the observed gas and stellar density distributions well, with the slope of the gas density gradient in the region of 4.5 kpc$Y_1$ and -0.123dex/kpc in model $Y_2$, respectively, which fit well the observed gradient of -0.l1dex/kpc. The abundance gradient reproduced in model $Y_1$ is getting flatter with decreasing radius, while that in model $Y_2$ is getting steeper, which fits better the observed abundance gradient. This result shows the necessity of exponentially increasing type I supernova explosion rate with decreasing radius in order to explain the observed abundance gradient in the disk. The fitness of observed density distribution and star formation rate distribution justifies the reliability of time-dependent bimodal IMF as a compound quantitative chemical evolution model of the Galaxy. The temporal variations of metallicity gradients for carbon, nitrogen and oxygen are also shown.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1261-1266
• /
• 2004

Dielectric Barrier Discharge (DBD) in air, which has been established for the production of large quantities of ozone, is more recently being applied to a wider range of aftertreatment processes for HAPs (Hazardous Air Pollutants). Although DBD has high electron density and energy, its potential use as precharging nano and submicron particles are not well known. In this work, we measured I-V characteristics of DBD and estimated collection efficiency of the particles by DBD type 2-stage ESP. To examine the particle collection with various applied voltage waveforms of DBD for nano and submicron sized, bimodal particles were generated by a electrical tube furnace and an atomizer.

• Annals of Clinical Neurophysiology
• /
• 제7권1호
• /
• pp.7-12
• /
• 2005

Background: Essential tremor (ET) is a common movement disorder that often causes functional disability. There have been very few investigations about the clinical characteristics of ET in Korea. Therefore, we performed a study showing the clinical features and electrophysiological findings of ET. Methods: We analyzed medical records and accelerometry data of 152 patients (male vs female; 79 vs 73) with ET, who visited the Neurology Clinic of Hospital from 2000 to 2003. Clinical characteristics of ET were summarized including the age of onset, family history, tremor type, body part involved, and associated symptoms. The frequency of tremor was recorded and the spectral analysis of tremor was performed. Results: The age of tremor onset showed bimodal distribution with peaks in the 2nd and 5th decades. Family history was found in 46 patients (30.3%). The patients with the family history presented earlier onset of tremor than patients without the history (mean age of onset, y: 35.2 vs. 49.9, P < 0.001). Tremor appeared most frequently in hands (94%), and followed by head (25%). In head tremor, "no-no" pattern was mainly observed and the head tremor was more frequently observed in female. The frequency of tremor was negatively correlated with age (r=-0.49, P<0.001). Conclusions: The present study indicated some important findings about ET: (1) bimodal distribution for an age of onset, (2) younger age of onset in patients with a family history, (3) decreasing frequency of the tremor according to age, and (4) higher prevalence of head tremor in female patients.

• 수산해양기술연구
• /
• 제22권4호
• /
• pp.71-74
• /
• 1986

The author tried to clarify the distribution of the total length and body weight of the file h, Navodos modcstus, caught by trawl net during July, 1984 in the southern sea korea. Among the catches of five times fishing operation, 1540 individuals were randomly sampled for the measurement. The results are summarized as follows; " The distribution of total length showed bimodal type, wbich was able to analyzed into two normal distributions N(17.46, 1. 02^2) and N(22.09, 1. 77^2). And smaller group was much than older one. The age of the sample estimated from the total length distribution of. smaller group was 1. 5 to 2, and the larger group 2. 5 to 4. The relationship between the total length and the body weight can be presented as following equation: $$W=0.01726 L^{2.8507}$$ ' or $$W= 0.01109 L^{3.0}$$ or $$W= 0.01109 L^{3.0}$$.

• 한국분말재료학회지
• /
• 제17권2호
• /
• pp.136-141
• /
• 2010

Bismuth-telluride based $(Bi_{0.2}Sb_{0.8})_2Te_3$ thermoelectric powders were fabricated by two-step planetary milling process which produces bimodal size distribution ranging $400\;nm\;{\sim}\;2\;{\mu}m$. The powders were reduced in hydrogen atmosphere to minimize oxygen contents which cause degradation of thermoelectric performance by decreasing electrical conductivity. Oxygen contents were decreased from 0.48% to 0.25% by the reduction process. In this study, both the as-synthesized and the reduced powders were consolidated by the spark plasma sintering process at $350^{\circ}C$ for 10 min at the heating rate of $100^{\circ}C/min$ and then their thermoelectric properties were investigated. The sintered samples using the reduced p-type thermoelectric powders show 15% lower specific electrical resistivity ($0.8\;m{\Omega}{\cdot}cm$) than those of the as-synthesized powders while Seebeck coefficient and thermal conductivity do not change a lot. The results confirmed that ZT value of thermoelectric performance at room temperature was improved by 15% due to high electric conductivity caused by the controlled oxygen contents present at bismuth telluride materials.