• International Journal of Highway Engineering
• /
• v.16 no.1
• /
• pp.91-98
• /
• 2014

PURPOSES : Recently, there are increasing bicycle accidents along with increasing bicycles users. Bicycle accidents occurred frequently by perpendicular collision form at intersection inner. In order to improve safety of bicycle, drivers need to be aware of bicycles on the road and intersection geometric designs need to be designed to reduce risk associated with collisions between bicycles and car. This study aims to review the location of bicycle crossing in the viewpoint of bicycle safety. METHODS : Four types of bicycle crossing by curve radius and driver's check around the behavior are set to simulate the risk of collisions between bicycles and car turning right. Simulation using fortran programming are conducted on total 60 cases. RESULTS : Bicycle crossing located behind of crosswalk is lower the risk of collisions with car in all cases. In addition to the larger curve radius of pavement edge at intersection and the more pay attention to the rear by the turn head to the right is too low the risk of collisions with car. CONCLUSIONS : It is show that the location of bicycle crossing is safer behind than in front of crosswalk in the viewpoint of bicycle safety.

• Journal of the Korean Society of Safety
• /
• v.32 no.5
• /
• pp.8-12
• /
• 2017

Bicycles are very popular sporting goods in these days. Thus, the durability of bicycles is very important for the safety of bicyclists. It is well known that a bicycle frame is a major component which is essential to the safety and performance of a complete bicycle. In this study, the durability of bicycle frames were experimentally investigated under the fatigue load. Eighty bicycle frames with different types and materials were prepared and tested according to EN standards. Three kinds of fatigue loads, that is, pedalling, vertical and horizontal fatigue load, which occur constantly during riding a bicycle, were applied to the bicycle frames. The experimental results show that the horizontal fatigue load was the severest mode to pass EN standard. The pass ratio of horizontal fatigue load test was 45.2%, while the pass ratio of vertical fatigue load test was 100%. Most of cracks were found at the right side of bottom bracket shell and at the intersection area between head tube and down tube. It seems that the experimental results can be applied to improve the safety and performance of a bicycle frame.

• Journal of the Korean Society of Safety
• /
• v.31 no.6
• /
• pp.1-5
• /
• 2016

A bicycle is one of the most popular sporting goods in view of a sport activity and a human health. Metallic materials such as steel, aluminum, etc. were mainly used to the bicycle fork in the past. Nowadays, the carbon fiber reinforced composite materials are widely used to the manufacturing of a bicycle fork to reduce the weight and to increase the efficiency. Safety is a most important design parameter of a bicycle fork even if the weight and cost reduction are important. Bicycle failure may happen at the critical spot of a bicycle fork and cause the accident. In this paper, the composite bicycle fork will be analyzed to secure the safety and detect a critical spot by using the finite element method with Tsai-Wu failure criterion. The stress data were obtained for the laminated composites with various number of plies and fiber orientation under the bending load. Thus, design concept of a bicycle fork was proposed to secure the safety of a bicycle. The finite element analysis results show that the connection area between a steer tube and a fork blade is critical spot, and 75 or more layers of 0 degree are needed to secure the safety of a bicycle fork.

• Journal of Industrial Convergence
• /
• v.17 no.4
• /
• pp.125-129
• /
• 2019

With the growing number of people using bicycle, the number of bicycle accidents also has been increasing. It is said that bicycle accident can be reduced up to 11%~44% when riding a bicycle if LED light is used. The headlight of the bicycle makes exposure effect to the opposite side of bike rider while taillight makes exposure effect to the rear bike rider for improving safety. Bicycle safety device capable of displaying a change of direction by LED is implemented in this study in response to control button signal. This signal makes LED light which is installed in pedal and wheel of bicycle as a module type emitting or flickering during the fixed hour. Bicycle auxiliary device in pedal which is able to improve safety using LED when bikers are riding a bike at night is developed in this study. Bicycle safety device applying wireless communication technology will be expected alternative technology in the future to solve a social problem such as energy, environment, and safety.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.8
• /
• pp.173-180
• /
• 2010

This research aims to enhance the security and safety of bicycle facilities by utilizing convergence technology of ubiquitous sensor network in the transportation system. To achieve the aim, U-bike system has developed by utilizing sensor network technology, and the serviceability and safety function of public facilities in the system have enhanced. This research also presents a plan for the construction of U-bike using ubiquitous sensor network and safety infrastructure of facilities by analyzing bicycle traffic reports and characteristics of service through studying the literature on the security of bicycles and the safety of facilities on bicycle lanes. The result of this research will contribute to the enhancement of safety function of bicycle lanes and facilities around National 4 major rivers bicycle lanes in the future.

• Journal of Korea Planning Association
• /
• v.53 no.7
• /
• pp.49-66
• /
• 2018

The purpose of this study is to analyze neighborhood environmental factors affecting bicycle accidents and accidental severity in Seoul, Korea. The use of bicycles has increased rapidly as daily transportation means in recent years. As a result, bicycle accidents are also steadily increasing. Using Traffic Accident Analysis System (TAAS) data from 2015 to 2017, this study uses negative binomial regression analysis to identify neighborhood environmental factors affecting bicycle accidents and accidential severity. The main results are as follows. First, bicycle accidents are more likely to occur in commercial and mixed land use areas where pedestrians, bicycle and vehicles are moving together. Second, bicycle accidents are positively associated with road structures such as four-way intersection. In contrast, three-way intersection is negatively associated with serious bicycle accidents. The density of speed hump or street tree is negatively associated with bicycle accidents and accidential severity. This finding indicates the effect of speed limit or street trees on bicycle safety. Fourth, bicycle infrastructures are also important factors affecting bicycle accidents and accidential severity. Bicycle-exclusive roads or bicycle-pedestrian mixed roads are positively associated with bicycle accidents and accidential severity. Finally, this study suggests policy implications to improve bicycle safety.

• International Journal of Highway Engineering
• /
• v.14 no.4
• /
• pp.103-111
• /
• 2012

PURPOSES : Effective speed management is necessary for preventing traffic crashes on the road. Speed hump is known as an effective tool for managing speed. Unlike existing studies which are mainly focused on humps for vehicles, this study proposed a novel method to determine design parameters for bicycle speed humps based on a multi-criteria decision making process. METHODS : Three objectives including the effectiveness of speed reduction, bicycle safety, and user's comfortability were incorporated into the proposed evaluation framework for determining design parameters. A multi-criteria value function was also derived and utilized as a part of the proposed method. RESULTS : Extensive simulations and statistical tests show that an integrated bike-box way is identified as the best in terms of operational efficiency and safety. CONCLUSIONS : It is expected that the outcomes of this study can be a valuable precursor for developing design guidelines for bicycle road and facility.

• International Journal of Highway Engineering
• /
• v.14 no.5
• /
• pp.145-155
• /
• 2012

PURPOSES: This study proposes a novel method based on microscopic simulation models to evaluate bicycle passing ways in mixed traffic flow conditions at signalized intersections. METHODS: Both operational efficiency and safety are taken into consideration in the evaluation. A widely used performance measure, delay, is used for evaluating the operational efficiency. Regarding the safety evaluation, surrogate safety measures (SSM) to represent traffic conflicts and the level of crash severity, DeltaS and Max.DeltaV, are applied in the proposed method. RESULTS: Extensive simulations and statistical tests show that an integrated bike-box way is identified as the best in terms of operational efficiency and safety. CONCLUSIONS: The proposed method and outcomes of this study will be valuable for bicycle traffic operations and facility design.

• Journal of the Korea Convergence Society
• /
• v.4 no.1
• /
• pp.1-7
• /
• 2013

This paper is the product development of environment and safety. In growing society, the bicycle is need to have a common goals for consumers convenience and theft prevention. The bicycle is movable means. But as times passed, that bicycle is strongly recommended to replace other vehicles because that is not produced to air pollution and energy(gas, diesel etc) insufficiency. As workers using a bicycle are increased, road for only bicycle is made by additionary. The bicycles happens to several moving accidents such as car accidents because of signal mismatch between bicycle users. However, using the development products of this paper, many accident problems for bicycle can be solved. As increasing of bicycles numbers, the high cost bicycles are too increased. So, the more theft of bicycle is also happened. The developed products(turn signal system and theft prevention system) through this study kept your bicycles from more convenience and more safe.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.63-64
• /
• 2012