• Journal of the Korean Society of Safety
• /
• v.31 no.6
• /
• pp.1-5
• /
• 2016

A bicycle is one of the most popular sporting goods in view of a sport activity and a human health. Metallic materials such as steel, aluminum, etc. were mainly used to the bicycle fork in the past. Nowadays, the carbon fiber reinforced composite materials are widely used to the manufacturing of a bicycle fork to reduce the weight and to increase the efficiency. Safety is a most important design parameter of a bicycle fork even if the weight and cost reduction are important. Bicycle failure may happen at the critical spot of a bicycle fork and cause the accident. In this paper, the composite bicycle fork will be analyzed to secure the safety and detect a critical spot by using the finite element method with Tsai-Wu failure criterion. The stress data were obtained for the laminated composites with various number of plies and fiber orientation under the bending load. Thus, design concept of a bicycle fork was proposed to secure the safety of a bicycle. The finite element analysis results show that the connection area between a steer tube and a fork blade is critical spot, and 75 or more layers of 0 degree are needed to secure the safety of a bicycle fork.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.1
• /
• pp.45-56
• /
• 2022

Recently, bicycle sharing system is introduced and the usage of shared bicycles is increasing in Suwon city. Despite the need to expand the bicycle road infrastructure, this is not the case. Therefore, this research attempts to propose a method for bicycle lane installation in Suwon city. For this, this research conducted location analysis based on the shared bicycle usage data and trip inducing facility data. Using location analysis results, appropriate routes for bicycle lanes are selected. As a result, two routes are selected. These routes have advantages that it is easy to connect with the existing bicycle roads or traffic inducing facilities and to install using the existing bicycle roads. However, these routes also have disadvantage that traffic congestion may occur due to the occupancy of the existing road space. It is expected that this research may contribute to expansion and maintenance of bicycle lane infrastructure, the bicycle and PM sharing service usage, implementation of sustainable urban transportation systems in Suwon city.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.1
• /
• pp.11-20
• /
• 2011

This study aimed to devise the method to construct safe and convenient bicycle road by considering the peripheral environmental factor related to using bicycle. Analyzing the existing design of bicycle road and construction case, this study established the method to design bicycle road that reflects site condition and presented the optimal design method for each type of bicycle road to construct safe and convenient bicycle road by analyzing the type of traffic accident for each type of bicycle road, surveying present situation and local survey. It was found that the optimum design of bicycle road for specification, width, curve radius, ascending slope, etc in consideration of peripheral environment and separating traffic between users of traffic means should be done by installing safety sign, safe facilities and separation facilities to design safe bicycle road. Further, the minimum traffic space of bicycle users and connection between bicycle roads should be ensured to design safe bicycle road. It is judged that information related to safety and convenience of bicycle road such as slope, route information, location of convenience facilities, information to the public traffic should be provided so as to activate the users of bicycle.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.6
• /
• pp.49-56
• /
• 2011

Leisure bicycles are fabricated in a variety of ways these days. Although, the bicycles are designed and manufactured in a variety of ways by numerous companies, customer has a difficulty in gaining information of bicycle which suits them. Accordingly most of buyers purchase bicycle considering body size. Employing the method is one of the ways to decide bike size on the ground of standard body measurement. However, the method above to purchase bicycle is not appropriate for customer considering his/her body. The research mainly aims to design bicycle which allows buyer to adjust optimal design system by himself/herself considering his/her body size. In addition, a device employing fuzzy controller implemented bicycle run test. Using on the result, the research explored an optimal bicycle system which makes a decision whether a bicycle fits body of customer.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.3
• /
• pp.1026-1042
• /
• 2020

People are increasingly demanding to experience realistic behavior of virtual characters in computer games. In this article, we build a computer model for simulating a bicycle rider's behavior in a virtual riding system. A method to calculate the speed of a bicycle rider is proposed to improve the reality in a virtual riding system. In this method, the property of physical energy is introduced, and the bicycle-riding speed is calculated in real time according to the relationship between the rider's physical energy and bicycle-riding speed. Then based on the analysis of the behavior of a cyclist in a real competition, various behaviors of the virtual rider are designed and a behavior-tree for the virtual bicycle rider is constructed accordingly. On the basis of these, a virtual riding system is developed. The experiments results show that our system can simulate the behavior of a virtual bicycle rider, and thus encourage exercise on a stationary bicycle.

• Journal of the Korean Society of Safety
• /
• v.32 no.5
• /
• pp.8-12
• /
• 2017

Bicycles are very popular sporting goods in these days. Thus, the durability of bicycles is very important for the safety of bicyclists. It is well known that a bicycle frame is a major component which is essential to the safety and performance of a complete bicycle. In this study, the durability of bicycle frames were experimentally investigated under the fatigue load. Eighty bicycle frames with different types and materials were prepared and tested according to EN standards. Three kinds of fatigue loads, that is, pedalling, vertical and horizontal fatigue load, which occur constantly during riding a bicycle, were applied to the bicycle frames. The experimental results show that the horizontal fatigue load was the severest mode to pass EN standard. The pass ratio of horizontal fatigue load test was 45.2%, while the pass ratio of vertical fatigue load test was 100%. Most of cracks were found at the right side of bottom bracket shell and at the intersection area between head tube and down tube. It seems that the experimental results can be applied to improve the safety and performance of a bicycle frame.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.604-609
• /
• 2002

In development of an advanced bicycle simulator, the investigation of the interactions between bicycle and rider during cycling is paramount important because bicycle is a two-wheeled human-powered vehicle. Tn this work, the tilt stability. among various interactions, of bicycling is investigated experimentally, In the experiments, the tilt angles of the bicycle, riders body and head are measured, as the riding p;1th and the speed are varied. Subjects are asked to ride along four typical paths on rigid flat ground : the straight, C-curved, S-curved and circle paths. The results from extensive experiments with different subjects can be summarized as : 1) The tilt angles of bicycle and rider are almost out of phase during pedaling along the straight path. 2) The bicycle tilt angle is nearly proportional to the square of bicycle speed for the straight and curved paths, and to the curvature for the curved paths. The head tilt angle is the biggest and the body tilt angle is the smallest for the straight path, but the tendency is reversed for the C-curved path. During the curve maneuvering, the rider's head tends to tilt by less than 40% of the bicycle tilt angle.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.1
• /
• pp.106-111
• /
• 2012

Recently the usage of bicycle has increased steeply in Korea owing to traffic culture of well- being. In a car to bicycle accident investigation, the throw distance of bicycle is very important factor for reconstructing of the accident. The variables that influence on the throw distance of bicycle can be classified into the factors of vehicle and bicycle. Simulations and collision tests in actual car to bicycle accident were executed for obtaining throw distance of bicycle. The simulations were done by PC-$CRASH^{TM}$ and for actual crash tests sand bags were used for the behavior of bicyclist instead of dummy. Factors considered were vehicle velocity and the moving angles of bicycle, also the types of bicycle and vehicle were fairy cycle and automobile, respectively. From the results, the throw distances of a head-on tire collision of $0^{\circ}$ direction was longer than that of tire crash test of $45^{\circ}$ direction, and the throw distances of a head -on frame crash test of $90^{\circ}$ direction was longer than that of frame crash test of $45^{\circ}$ direction. In addition restitution coefficient between vehicle and bicycle was estimated as about 0.1 with based on actual crash tests. Finally the increaser vehicle velocity the longer the throw distances of bicycle, and the results of simulation were relatively good agreement to the experimental results.

• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.3
• /
• pp.75-81
• /
• 2010

Existing studies on the bicycle road were mostly for the promotion of bicycle road through the creation of bicycle road. However, as the gradually increase of bicycle users, it has been required service based on low carbon green growth in order to promote the use of bicycles which are green means of transportation. Analysis of existing bicycle use information is mainly based on calculating the amount of exercise, so the diverse needs of bicycle user does not accommodated. Therefore, in this study, it is proposed that methodology compute to reduce cost or amount of carbon dioxide, fuel, and processing costs of global warming by using bicycle. For this, a program is implemented to display bicycle use information provided in the form of GPX based on Google Earth in three-dimensional environment and to service based on low carbon, green growth. The developed program is compared with existing commercial software. Through this study, new services have been developed to carry out low carbon and green growth in terms of bicycle users, and it is considered that the services can be applied to devices such as smart phones.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.5
• /
• pp.385-391
• /
• 2013

As a solution for environmental problems caused by increasing number of vehicles, it is encouraged to use a bicycle as an environment-friendly transportation method. To vitalize the bicycle usage, it is a necessary to construct bicycle roads that are safe and suitable for users. Based on the previous research results, we assume the main purposes of bicycle usages are mainly local leisure activity and school commuting. Thus, the proposed method finds the shortest link between the existing bicycle road network and bicycle usage facilities such as leisure activity places or schools over public road network. Then, we carry out the RTK DGPS survey for the candidate links, and analyze the slopes of them. When the slope of a found link is larger than a threshold, an alternative link is re-found for the safety and convenience of a bicycle user. The proposed method is applied to the real bicycle road network in Mokpo, Chunnam and the results are discussed.