• 전자공학회논문지SC
• /
• 제46권2호
• /
• pp.72-77
• /
• 2009

본 논문은 별도 기준 클록 없이 고속 시리얼 데이터 통신을 위한 3.2Gb/s 클록 데이터 복원(CDR) 회로를 설명한다. CDR회로는 전체적으로 5부분으로 구성되며, 위상검출기(PD)와 주파수 검출기(FD), 다중 위상 전압 제어 발진기(VCO), 전하펌프(CP), 외부 루프필터(LF)로 구성되어 있다. CDR회로는 half-rate bang-bang 타입의 위상 검출기와 입력 pull-in 범위를 늘릴 수 있도록 half-rate 주파수 검출기를 적용하였다. VCO는 4단의 차동 지연단(delay cell)으로 구성되어 있으며 튜닝 범위와 선형성 향상을 위해 rail-to-rail 전류 바이어스단을 적용하였다 각 지연단은 풀 스윙과 듀티의 부정합을 보상할 수 있는 출력 버퍼를 갖고 있다. 구현한 CDR회로는 별도의 기준 클록 없이 넓은 pull-in 범위를 확보할 수 있으며 기준 클록 생성을 위한 부가적인 Phase-Locked Loop를 필요치 않기 때문에 칩의 면적과 전력소비를 효과적으로 줄일 수 있다. 본 CDR 회로는 0.18um 1P6M CMOS 공정을 이용하여 제작하였고 루프 필터를 제외한 전체 칩 면적은 $1{\times}1mm^2$이다. 3.2Gb/s 입력 데이터 율에서 모의실험을 통한 복원된 클록의 pk-pk 지터는 26ps이며 1.8V 전원전압에서 전체 전력소모는 63mW로 나타났다. 동일한 입력 데이터 율에서 테스트를 통한 pk-pk 지터 결과는 55ps였으며 신뢰할 수 있는 입력 데이터율 범위는 약 2.4Gb/s에서 3.4Gb/s로 나타났다.

• Journal of Korean Dental Science
• /
• 제15권1호
• /
• pp.1-8
• /
• 2022

Purpose: Intraoral scanners, desktop scanners, and cone-beam computed tomography (CBCT) are being used in a complementary way for diagnosis and treatment planning. Limited patient-based results are available about dimensional reproducibility among different three-dimensional imaging systems. This study aimed to evaluate dimensional reproducibility among patient-derived digital models created from an intraoral scanner, desktop scanner, and two CBCT systems. Materials and Methods: Twenty-nine arches from sixteen patients who were candidates for implant treatments were enrolled. Different types of CBCT systems (KCT and VCT) were used before and after the surgery. Polyvinylsiloxane impressions were taken on the enrolled arches after the healing period. Gypsum casts were fabricated and scanned with an intraoral scanner (CIOS) and desktop scanner (MDS). Four test groups of digital models, each from CIOS, MDS, KCT, and VCT, respectively, were compared to the reference gypsum cast group. For comparison of linear measurements, intercanine and intermolar widths and left and right canine to molar lengths were measured on individual gypsum cast and digital models. All measurements were triplicated, and the averages were used for statistics. Bland-Altman plots were drawn to assess the degree of agreement between each test group with the reference gypsum cast group. A linear mixed model was used to analyze the fixed effect of the test groups compared to the reference group (α=0.05). Result: The Bland-Altman plots showed that the bias of each test group was -0.07 mm for CIOS, -0.07 mm for MDS, -0.21 mm for VCT, and -0.25 mm for KCT. The linear mixed model did not show significant differences between the test and reference groups (P>0.05). Conclusion: The linear distances measured on the digital models created from CIOS, MDS, and two CBCT systems showed slightly larger than the references but clinically acceptable reproducibility for diagnosis and treatment planning.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2012년도 추계학술대회
• /
• pp.221-224
• /
• 2012

본 논문에서는 MEMS 가속도센서를 위한 CMOS 인터페이스 회로를 설계하였다. 설계된 CMOS 인터페이스 회로는 CVC(Capacitance to Voltage Converter), 그리고 SC-Integrator와 Comparator를 포함하는 ${\Sigma}{\Delta}$ Modulator로 구성되어 있다. 회로에 일정한 Bias를 공급할 수 있도록 Bandgap Reference를 이용하였으며, 저주파 잡음과 offset을 감소시키기 위하여 ${\Sigma}{\Delta}$ Modulator에 CHS(Chopper-Stabilization) 기법을 사용하였다. 그 결과 설계된 ${\Sigma}{\Delta}$ Modulator의 출력은 입력 전압 진폭이 100mV가 증가할 때 duty cycle은 10%의 비율로 증가하고, 전체 회로의 Sensitivity는 x, y축은 0.45V/g, z축은 0.28V/g의 결과를 얻을 수 있었다. 제안된 CMOS 인터페이스 회로는 CMOS 0.35um공정을 이용하여 설계되었다. 입력 전압은 3.3V이며, 샘플링 주파수는 2MHz이다. 설계된 칩의 크기는 PAD를 포함하여 $0.96mm{\times}0.85mm$이다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2012년도 추계학술대회
• /
• pp.838-841
• /
• 2012

본 논문에서는 온도변화에 따른 회로 손상이나 성능 저하를 피하기 위해서 회로 안에 내장할 수 있는 온도 센서 회로를 설계하였다. 일반적인 PTAT회로를 사용하여 온도감지를 하고, 스위치를 내장시켜 회로 동작이 불가능할 정도로 IC 내부 온도가 높을 때는 절전모드로 동작하게 하였다. 또한, 전류미러 및 캐스코드회로를 사용함으로서 전류 정합특성을 향상시켰다. 시뮬레이션 결과 $75^{\circ}C$일 경우 약 1V, $130^{\circ}C$일 경우 1.75V를 출력전압을 발생하였으며, 절전모드의 경우 0V~7uV까지 즉 거의 0V에 가까운 출력전압을 발생함을 확인 할 수 있었다.

• 한국임상수의학회지
• /
• 제20권1호
• /
• pp.7-11
• /
• 2003

감염된 환축을 찾는 진단과정에 완벽하지 못한 진단검사를 사용하는 경우 진단검사 결과는 흔히 왜곡되어 나타난다. 본 연구에서 저자는 Helicobacter pylori 감염을 진단하는데 사용되는 urease 검사, PCR 검사 및 조직학적인 검사법을 단독으로 사용하는 경우와 병행하여 사용하는 상황으로 구분하여 각각 진단적 특성을 평가하였다. 비선형 회귀모형 분석결과 민감도, 특이도, 양성우도비 및 음성우도비는 urease 검사법의 경우 99.9%, 99.9%, 99.9%, 99.6%, PCR 검사의 경우 88.6%, 99.9%, 99.9%, 70.5%, 조직검사법의 경우 78.3%, 97%, 78.3%, 97%fh 나타났다. 예측도는 유병율의 변화에 따라 다양한 값을 보였으며 Helicobacter pylori 감염의 유병율이 35% 이상일 때 조직 검사상 양성결과는 90% 이상의 일치도를 보였고, 유병율이 25% 미만일 때 조직 검사상 음성결과는 90% 이상의 일치도를 보였다. 본 연구결과 임상에서 감염된 개체를 스크리닝하는 목적으로 세가지 진단검사를 병행하는 것은 실질적인 이익이 없으며 단독검사로서 urease 검사와 PCR 검사가 가장 적합한 것으로 나타났다.

• 한국안전학회지
• /
• 제34권5호
• /
• pp.46-54
• /
• 2019

Even though the fire performance-based design concept has been introduced for various structures and buildings, which have their own specific fire performance level, the uncertainties of input parameters always exist and, then, could reduce significantly the reliability of the fire modeling. Sensitivity analysis was performed with three limited input parameters, HRRPUA, type of combustible materials, and mesh size, which are significantly important for fire modeling. The output variables are limited to the maximum HRR, the time reaching the reference temperature($60^{\circ}C$), and that to reach limited visible distance(5 m). In addition, correlation coefficient analysis was attempted to analyze qualitatively and quantitatively the degree of relation between input and output variables above. Finally, the relationship among the three variables is also analyzed by the principal component analysis (PCA) to systematically analyze the input data bias. Sensitivity analysis showed that the type of combustible materials is more sensitive to maximum HRR than the ignition source and mesh size. However, the heat release parameter of the ignition source(HRR) is shown to be much more sensitive than the combustible material types and mesh size to both time to reach the reference temperature and that to reach the critical visible distance. Since the derived results can not exclude the possibility that there is a dependency on the fire model applied in this study, it is necessary to generalize and standardize the results of this study for the fire models such as various buildings and structures.

• 한국환경보건학회지
• /
• 제45권3호
• /
• pp.258-266
• /
• 2019

Objectives: In this study, blood lead was analyzed using graphite furnace atomic absorption spectrometry (GF-AAs) and inductively coupled plasma mass spectrometry (ICP-MS). We tried to examine the difference and consistency of the analytical values and the applicability of the analytical method. Methods: We selected 57 people who agreed to participate in this study. After confirming the linearity of the calibration standard curves in GF-AAs and ICP-MS, the concentrations of lead in quality control material and samples were measured, and the degree of agreement was compared. Results: The detection limit of the ICP-MS was lower than that of GF-AAs. The coefficient of variation of reference materials was shown to be stable in the ICP-MS and GF-AAs. When the correspondence between the two equipments was verified by bias of the analysis values, a concordance was shown, and approximately 98% of the ideal reference lines were present within ${\pm}40%$ of the deflection. Conclusion: GF-AAs showed high sensitivity to single heavy metal analysis, but it took much time and showed higher detection limit than ICP-MS. Therefore, it would be considered necessary to switch to ICP-MS analysis method, considering that the level of lead exposure is gradually decreasing.

• 대한원격탐사학회지
• /
• 제37권1호
• /
• pp.169-176
• /
• 2021

The Global Space-based Inter-Calibration System (GSICS) is an international partnership sponsored by World Meteorological Organization (WMO) to continue and improve climate monitoring and to ensure consistent accuracy between observation data from meteorological satellites operating around the world. The objective for GSICS is to inter-calibration from pairs of satellites observations, which includes direct comparison of collocated Geostationary Earth Orbit (GEO)-Low Earth Orbit (LEO) observations. One of the GSICS inter-calibration methods, the Ray-matching technique, is a surrogate approach that uses matched, co-angled and co-located pixels to transfer the calibration from a well calibrated satellite sensor to another sensor. In Korea, the first GEO satellite, Communication Ocean and Meteorological Satellite (COMS), is used to participate in the GSICS program. The National Meteorological Satellite Center (NMSC), which operated COMS/MI, calculated the Radiative Transfer Model (RTM)-based GSICS coefficient coefficients. The L1P reproduced through GSICS correction coefficient showed lower RMSE and Bias than L1B without GSICS correction coefficient applied. The calculation cycles of the GSICS correction coefficients for COMS/MI visible channel are provided annual and diurnal (2, 5, 10, 14-day), but long-term evaluation according to these cycles was not performed. The purpose of this paper is to perform evaluation depending on the annual/diurnal cycles of COMS/MI GSICS correction coefficients based on the ray-matching technique using Suomi-NPP/Visible Infrared Imaging Radiometer Suite (VIIRS) data as reference data. As a result of evaluation, the diurnal cycle had a higher coincidence rate with the reference data than the annual cycle, and the 14-day diurnal cycle was the most suitable for use as the GSICS correction coefficient.

• 한국항행학회논문지
• /
• 제26권2호
• /
• pp.63-71
• /
• 2022

압력계는 고도 산출에 이용되어왔으며 기술의 발달로 큰 부피를 가지던 압력계는 현재 수 mm~cm정도의 크기로 축소되었다. 압력계를 이용한 고도 산출은 기준 압력과 압력계로 얻어진 압력간 관계를 이용하여 진행되며, 이를 위해 기압계의 사전 보정이 필수적이다. 또한 압력계는 생산과정 특성상 실제 압력과 일정 수준의 바이어스가 존재하며, 많은 스마트폰 제조사들은 이를 제조 과정에서 보정하는 것으로 추정되나 환경변수에 의한 오차는 그 특성상 사전에 보정하기 불가능하다는 단점이 있다. 해당 연구에서는 정적 기준국을 이용한 압력계 보정정보 생성론을 확장하여 이동하는 드론에서 보정 정보를 생성하여 이를 적용함으로써 압력계를 이용한 고도 산출을 목표로 하였으며 실험을 통해 드론 보정정보의 생성 및 적용이 가능함을 확인하였다.

• 대한임상검사과학회지
• /
• 제37권2호
• /
• pp.65-70
• /
• 2005

Those specifications of the CLIA analytical tolerance limits are consistent with the performance goals in Six Sigma Quality Management. Six sigma analysis determines performance quality from bias and precision statistics. It also shows if the method meets the criteria for the six sigma performance. Performance standards calculates allowable total error from several different criteria. Six sigma means six standard deviations from the target value or mean value and about 3.4 failures per million opportunities for failure. Sigma Quality Level is an indicator of process centering and process variation total error allowable. Tolerance specification is replaced by a Total Error specification, which is a common form of a quality specification for a laboratory test. The CLIA criteria for acceptable performance in proficiency testing events are given in the form of an allowable total error, TEa. Thus there is a published list of TEa specifications for regulated analytes. In terms of TEa, Six Sigma Quality Management sets a precision goal of TEa/6 and an accuracy goal of 1.5 (TEa/6). This concept is based on the proficiency testing specification of target value +/-3s, TEa from reference intervals, biological variation, and peer group median mean surveys. We have found rules to calculate as a fraction of a reference interval and peer group median mean surveys. We studied to develop total error allowable from peer group survey results and CLIA 88 rules in US on 19 items TP, ALB, T.B, ALP, AST, ALT, CL, LD, K, Na, CRE, BUN, T.C, GLU, GGT, CA, phosphorus, UA, TG tests in chematology were follows. Sigma level versus TEa from peer group median mean CV of each item by group mean were assessed by process performance, fitting within six sigma tolerance limits were TP ($6.1{\delta}$/9.3%), ALB ($6.9{\delta}$/11.3%), T.B ($3.4{\delta}$/25.6%), ALP ($6.8{\delta}$/31.5%), AST ($4.5{\delta}$/16.8%), ALT ($1.6{\delta}$/19.3%), CL ($4.6{\delta}$/8.4%), LD ($11.5{\delta}$/20.07%), K ($2.5{\delta}$/0.39mmol/L), Na ($3.6{\delta}$/6.87mmol/L), CRE ($9.9{\delta}$/21.8%), BUN ($4.3{\delta}$/13.3%), UA ($5.9{\delta}$/11.5%), T.C ($2.2{\delta}$/10.7%), GLU ($4.8{\delta}$/10.2%), GGT ($7.5{\delta}$/27.3%), CA ($5.5{\delta}$/0.87mmol/L), IP ($8.5{\delta}$/13.17%), TG ($9.6{\delta}$/17.7%). Peer group survey median CV in Korean External Assessment greater than CLIA criteria were CL (8.45%/5%), BUN (13.3%/9%), CRE (21.8%/15%), T.B (25.6%/20%), and Na (6.87mmol/L/4mmol/L). Peer group survey median CV less than it were as TP (9.3%/10%), AST (16.8%/20%), ALT (19.3%/20%), K (0.39mmol/L/0.5mmol/L), UA (11.5%/17%), Ca (0.87mg/dL1mg/L), TG (17.7%/25%). TEa in 17 items were same one in 14 items with 82.35%. We found out the truth on increasing sigma level due to increased total error allowable, and were sure that the goal of setting total error allowable would affect the evaluation of sigma metrics in the process, if sustaining the same process.