• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.11 s.254
• /
• pp.1084-1092
• /
• 2006

Shape optimization of airfoil in WIG craft has been performed by considering the ground effect. The WIG craft should satisfy various aerodynamic characteristics such as lift, lift to drag ratio, and static height stability. However, they show a strong trade-off phenomenon so that it is difficult to satisfy aerodynamic properties simultaneously. Optimization is carried out through the multi-objective genetic algorithm. A multi-objective optimization means that each objective is considered separately instead of weighting. Due to the trade-off, pareto sets and non-dominated solutions can be obtained instead of the unique solution. NACA0015 airfoil is considered as a baseline model, shapes of airfoil are parameterized and rebuilt with four-Bezier curves. There are eighteen design variables and three objective functions. The range of design variables and their resolutions are two primary keys for the successful optimization. By two preliminary optimizations, the variation can be reduced effectively. After thirty evolutions, the non-dominated pareto individuals of twenty seven are obtained. Pareto sets are all the set of possible and excellent solution across the design space. At any selections of the pareto set, these are no better solutions in all design space.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.11 s.188
• /
• pp.78-84
• /
• 2006

The objective of this study is to design the optimal die profile that can prevent material fracture in the tube drawing process for automobile steering input shaft. First, the CDV(Critical Damage Value) of material is obtained by the compression test and FE-analysis. The occurrence of fracture is estimated by the FE-analysis considering the CDV. In order to achieve the objective of this study, optimization technique and FE-analysis are applied. FPS(Flexible Polyhedron Search) method, which is one of the non-gradient optimization techniques often used in engineering, is used to search optimal die profile. The drawing die profile is represented by Bezier-curve to generate all the possible die profile. Using FPS method and FE-analysis the optimal drawing die profile is determined. To verify tile effectiveness of the redesigned optimal die, the tube drawing experiment is performed. In the experimental result, it is possible to produce sound product without material fracture using the redesigned optimal die.

• Korean Journal of Computational Design and Engineering
• /
• v.6 no.1
• /
• pp.31-39
• /
• 2001

Presented in this paper are algorithms to compute the positions of vertices and equations of edges of the Voronoi diagram of a circle set. The circles are located in a Euclidean plane, the radii of the circles are not necessarily equal and the circles are not necessarily disjoint. The algorithms correctly and efficiently work when the correct topology of the Voronoi diagram was given. Given three circle generators, the position of the Voronoi vertex is computed by treating the plane as a complex plane, the Z-plane, and transforming it into another complex plane, the W-plane, via the Mobius transformation. Then, the problem is formulated as a simple point location problem in regions defined by two lines and two circles in the W-plane. And the center of the inverse-transformed circle in Z-plane from the line in the W-plane becomes the position of the Voronoi vertex. After the correct topology is constructed with the geometry of the vertices, the equations of edge are computed in a rational quadratic Bezier curve farm.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.11
• /
• pp.1036-1042
• /
• 2013

In this paper, an elderly assistance system is developed based on Xenomai, a real-time development framework cooperating with the Linux kernel. A Kinect sensor is used to recognize the behavior of the elderly and A-star search algorithm is implemented to find the shortest path to the person. The mobile robot also generates a trajectory using a digital convolution operator which is based on a Bezier curve for smooth driving. In order to follow the generated trajectory within the control period, we developed real-time tasks and compared the performance of the tracking trajectory with that of non real-time tasks. The real-time task has a better result on following the trajectory within the physical constraints which means that it is more appropriate to apply to an elderly assistant system.

• Journal of Korean Institute of Industrial Engineers
• /
• v.20 no.2
• /
• pp.77-90
• /
• 1994

Curve-net interpolation surface is one of the most popular method in engineering design. Therefore it is supported with many commercial CAD/CAM system. However, construction algorithm of curve-net interpolation surfaces is rarely opened to the public because of its copy-right. In this paper we establish a construction algorithm of curve-net interpolation surface so called sweeping surface which especially concentrates on trajectory of cross-section curve. We also show the method which can construct sweeping surfaces as NURB or Bezier mathematical models. Surfaces having the form of standard mathematical models are very useful for the application of joining, trimming, blending etc. The proposed surface interpolation scheme consists of four steps; (1) preparation of guide curves and section curves, (2) remeshing guide curves and section curves, (3) blending section curves after deformation, and (4) determination of control points for sweeping surface using gordon method. The proposed method guarantee $G^1$-continuety, and construct the surface salifying given section curves and trajectory of section curves.

• Journal of Korean Institute of Industrial Engineers
• /
• v.21 no.4
• /
• pp.529-540
• /
• 1995

The paper deals with a procedure for constructing a composite surface interpolating a polygonal curve mesh defined from 3D scattered points. The procedure consists of a poly-angulation, construction of a curve net, and interpolation of the curve net. The poly-angulation contains a stage that changes a triangular edge net obtained from a triangulation into a poly-angular edge net. A curve net is constructed by replacing edges on the edge net with cubic Bezier curves. Finally, inside of an n-sided polygon is interpolated by n subdivided triangular subpatches. The method interpolates given point data with relatively few triangular subpatches. For an n-sided polygon, our method constructs an interpolant with n subdivided triangular subpatches while the existing triangular surface modeling needs 3(n-2) subpatches. The obtained surface is composed of quartic triangular patches which are $G^1$-continuous to adjacent patches.

• Journal of the Optical Society of Korea
• /
• v.15 no.4
• /
• pp.321-328
• /
• 2011

Various methods have been investigated to increase photon density in soft tissue, an important factor in low-level laser therapy. Previously we developed a compression-controlled low-level laser probe (CCLLP) utilizing mechanical negative compression, and experimentally verified its efficacy. In this study, we used Bezier curves to numerically simulate the skin deformation and photon density variation generated by the CCLLP. In addition, we numerically modeled changes in optical coefficients due to skin deformation using a linearization technique with appropriate parameterization. The simulated results were consistent with both human in vivo and porcine ex vivo experimental results, confirming the efficacy of the CCLLP.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.2
• /
• pp.558-568
• /
• 2000

In the paper, we propose the automatic generation method of digital elevation map based on contour map. The proposed method classifies contour data and non-contour data by thinning and labelling process of the contour line and then connects smoothly broken contour line by Bezier curve. Finally, the digital devation map is generated by the interpolation using the height data of the contour line. The proposed method can reduce vest effort, time and expense which is spend to make digital elevation map.

• 유체기계공업학회:학술대회논문집
• /
• 2004.12a
• /
• pp.119-124
• /
• 2004

In this study, a rotor blade of a Curtis turbine is investigated. Bezier curve is generally used to define the profile of turbine blades. However, this curve gives a feature of global control, which is not proper to a supersonic impulse turbine blade. Thus, a blade design method is developed by using B-spline curve so that local control is possible to obtain an optimized blade section. To design a Curtis turbine blade section systematically, the blade section has been changed by varying three design parameters using central composite design method. Flow analyses have been carried out for the blade sections, and the effects of design parameters are evaluated.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.2B no.4
• /
• pp.168-173
• /
• 2002

A new identification algorithm for the Preisach model is presented. The algorithm treats the identification procedure of the Preisach model as an inverse problem where the independent variables are parameters of the distribution function and the objective function is constructed using only the initial magnetization curve or only tile major loop of the hysteresis curve as well as the whole reversal curves. To parameterize the distribution function, the Bezier spline and Gaussian function are used for the coercive and interaction fields axes, respectively. The presented algorithm is applied to the ferrite permanent magnets, and the distribution functions are correctly found from the major loop of the hysteresis curve or the initial magnetization curve.