• 한국조경학회지
• /
• 제26권4호
• /
• pp.82-94
• /
• 1999

According to Korean's geographical features of Taek Li Ji, the best location for human settlements is on the vicinity of a stream among a stream, an river and a sea, and not far from a ridge. The researcher chose one of best village which is called Yougokmaeul in Bonghwa-Gun, Kyungsang-Do. This village was created a gathering village with the same surname, can be translated as a hen and the front mountain can be seen as a rooster in the view of the shape of geographical features. As it were, the shape of this village and the cultivated land seems to be an egg inside a nest of a parent's chicken in the respect of the analogy of the theory of P'ungsuchiri which is known as Feng Shui in China and geomancy in the western world, and to effect the defensive psychology of the living environment in the terrain inland. This village is the studying place, Suckchunjungsa as the lecturing and studying place for their following students within the Chunghadonchun, the studying Yougok village, and even the ritual place performing ancestral sacrifices and the first incoming ancestor's graves in the same geographical system. The house site of the first incoming resident is surrounded the countian and is located in the front of Backsulryount which is the main mountain through Moonsu-san in the branch mountain of Korean's mountain system. Backsulryoung which is to be seen as the white peak, is symbolized the head of a hen which is to relate to a mysterious turtle in the view of P'ungsuchiri. And the pavilion which is called Chungamjung is sited on the rock of a shape of turtle which is symbolized to live longer. In the section of the mountain and water, Lee Jung Hwan mentioned a living place near the mountain stream is the best residential area and a landscape which is composed by a stream between mountains make a pleasure spirit and a bright feeling and make a refined person. If one can reach in the graceful mountain make a pleasure split and a bright feeling and make a refined person. If one can reach in the graceful mountain half day away, this kind of place must be a best living residential area to live. But this village was structured all in one place. And one of the ideas tangibly reflected in traditional Korean society's view of life and nature is the seclusion based on the Taoism. This kind of a dreamy thoughts make a dream to keep the paradise in our ancestors' mind. This kind of utopia is Chunghadonchun which is structured 5 aspects from the utopian gate near the Samgaesuewon to the village. These 5aspects is expressed by some Confucian thoughts as a small cosmos individually. On the third aspects which is the center among these aspects, the Suckchunjungsa which was made a seclusion place to devoting himself to his studies with refined tastes. The word of Jiju-am, Gangpung-dae, Jaewol-dae and Biryoung-pock are all expressed to cultivate one's moral character and to seek the truth by the Confucius'theory through the nature.

• 동아시아식생활학회지
• /
• 제25권6호
• /
• pp.1029-1040
• /
• 2015

Effects of punching and drying process on quality of Yukwa were determined. Lightness (L) of Yukwa dough with punching was higher than that with no punching. Air cell distribution of Yukwa dough was fine with higher punching. Microstructure of Yukwa dough showed a broken surface structure with increasing punching. Hardness and adhesiveness of Yukwa dough decreased after 5 min of punching and then increased with higher punching. Expansion ratio of Yukwa base with punching at 155 rpm for 5 min was highest among the samples. Appearance of Yukwa base with no punching showed a poor shape and cross section, whereas Yukwa base with punching at 95 rpm for 10 min showed the best appearance and cross section and Yukwa base with punching at 155 rpm for 5 min also showed good appearance. The moisture content of Yukwa Bandegi after 24 hr of drying was 14.93%. Microstructure of Yukwa Bandegi showed a broken surface structure and empty spaces with increased drying time. Expansion ratio of Yukwa base with 24 hr of drying at $40^{\circ}C$ was highest among the samples. Overall, optimum punching conditions were 10 min of punching at 95 rpm or 5 min of punching at 155 rpm and optimum drying condition was 24 hr of drying at $40^{\circ}C$.

• 한국임상수의학회지
• /
• 제32권5호
• /
• pp.445-448
• /
• 2015

5개월령 코리안 숏헤어 새끼 고양이(몸무게 1.7 kg)가 상부호흡기 증상, 얼굴과 발/발바닥의 궤양과 부종 및 파행을 주증으로 내원하였다. 실험실 검사상, 백혈구감소증, 림프구 감소증, 췌장염 및 칼리시바이러스 감염증이 확인되었다. 진단은 고독성 칼리시바이러스 감염증에 대한 특이 임상증상과 PCR을 통한 칼리시바이러스 동정 및 다른 상부호흡기 감염을 배제함으로써 내려졌다. 상부호흡기 증상완화와 이차 감염에 대한 처치 및 보조요법을 약 한 달간 실시하였고, 환자는 이러한 치료를 통해 임상증상이 크게 개선되었다. 본 증례는 고독성 고양이 칼리시바이러스에 대한 첫 번째 발병증례이다.

• 한국해양공학회지
• /
• 제5권2호
• /
• pp.207-207
• /
• 1991

The crack length measurements by electrical potential(EP) method for 1% Cr-Mo-V and 12%Cr steel of 0.5T-CT specimen were performed at $500^{\circ}C, 600^{\circ}C 700^{\circ}C$, and an applicability of stress intensity factor($K_I$), net section stress($\sigma_{net}$), $C^*$-ingegral and $C_t$ parameter was studied to measure creep crack growth rate(da/dt) with side groove and without side groove under static and cyclic loading condition. The experimental result could be summarized as follows: 1) Crack measurement by EP method was available and coincided with the Johnson,s analytical equation. 2) da/dt by $K_I$ and $\sigma_{net}$ was not adequate because of the wide scatter band according to load and temperature, but $C^*$-integral, except for transition region, was adequate. 3) $C_t$ parameter showed the best fitted line through total creep region without relating with both temperature and load condition. 4) Under the cyclic loading condition, $C_t$ parameter was proper to extimate da/dt. And it was shown that da/dt for 1% Cr-Mo V steel under the static condition(R=1) was 1.16 times faster than the case under cyclic loading(R=0), and for 12% Cr steel, 1.43 times.

• 한국해양공학회지
• /
• 제5권2호
• /
• pp.67-75
• /
• 1991

The crack length measurements by electrical potential(EP) method for 1% Cr-Mo-V and 12%Cr steel of 0.5T-CT specimen were performed at $500^{\circ}C, 600^{\circ}C 700^{\circ}C$, and an applicability of stress intensity factor($K_I$), net section stress($\sigma_{net}$), $C^*$-ingegral and $C_t$ parameter was studied to measure creep crack growth rate(da/dt) with side groove and without side groove under static and cyclic loading condition. The experimental result could be summarized as follows: 1) Crack measurement by EP method was available and coincided with the Johnson, s analytical equation. 2) da/dt by $K_I$ and $\sigma_{net}$ was not adequate because of the wide scatter band according to load and temperature, but $C^*$-integral, except for transition region, was adequate. 3) $C_t$ parameter showed the best fitted line through total creep region without relating with both temperature and load condition. 4) Under the cyclic loading condition, $C_t$ parameter was proper to extimate da/dt. And it was shown that da/dt for 1% Cr-Mo V steel under the static condition(R=1) was 1.16 times faster than the case under cyclic loading(R=0), and for 12% Cr steel, 1.43 times.

• 한국강구조학회 논문집
• /
• 제9권2호통권31호
• /
• pp.259-267
• /
• 1997

본 연구에서는 주 케이블에 횡방향 새그를 가진 자정식 현수교의 내풍안정성을 검토하기 위하여 풍동실험을 수행하고, 주형의 거동을 중심으로 그 결과를 분석하였다. 등류와 난류하에서 수행한 부분 모형 실험에서 가장 내풍안정성이 뛰어난 단면을 최종단면으로 선정하고, 전교 모형 실험을 통하여 검증하였다. 또한 차후 연구를 위한 플러터 계수를 측정하여 제시하였다. 교량의 사용성과 피로문제를 검토하기 위하여 버페팅 응답을 조사하였지만, 공학적 관점에서 만족할 만한 수준인 것으로 나타났다. 주형의 항력계수가 상당히 큼에도 불구하고 횡방향 변위가 매우 작게 나타났는데, 이는 주 케이블의 횡방향 새그가 주형의 변위를 구속하기 때문인 것으로 판단된다.

• 한국농공학회지
• /
• 제19권4호
• /
• pp.4533-4543
• /
• 1977

The purpose of this study was to investigate and compare flow discharges of rectangular, V-notch and trapezoidal type of cutthrooat flumes, and the published data for trapezoidal parshall flumes. And the trapezoidal cutthroat flumes were also compared in their accuracy of discharge measurements for various convergence ratios in the inlet section and divergence ratios in the outlet section. Five flumes were studied, and all the flumes were 45cm long with flat-bottom and were made of well-finished transparent acryl plate of 3mm thickness. One rectangular, one V-notch and three trapezoidal types were numbered 1 to 5 as shown in Fig. III-1. The measured depth of water was ranged from 5 to 20cm. The results obtained in this study are summarized as follows: 1. The general discharge equations for tested prototypes are listed for free flow in Table IV-1 and for submergence flow in Table IV-4. 2. In both free and submerged flow, the accuracy of the discharge formula obtained by this test is highly significant at 1% level as shown in Table IV-2 and Table IV-6. The accuracy of disharges measured depends upon the convergence and divergence ratios in the trapezoidal types: the less the ratios of convergence as well as divergence, the lower the accuracy. 3. Submergence ratios tend to increase in the order of flume number except flume No. 4. This implies that trapezoidal cutthroat flumes are more acceptable than rectangular or V-notch ones for free flow. 4. The transition submergence for the trapezoidal Parshall flumes ranges from 80-85 percent, which is slightly higher than the tested flume. However, the trapezoidal cutthroat flume No. 5 has higher transition submergence ratio, ranging from 73-78 percent, than other trapezoidal ones. The difference between the trapezoidal Parshall flumes and the trapezoidal cutthroat flumes in transition submergence seems small enough to be ignored in their field use. 5. Trapezoidal cutthroat flume is simple and economical to construct in existing openchannels whose shapes are generally trapezoidal. In order to obtain the best rating accuracy, flume No. 3 among the tested trapezoidal types is recommended, because it shows the highest accuracy for both free and submerged flow.

• 한국방재학회 논문집
• /
• 제3권4호
• /
• pp.131-143
• /
• 2003

본 연구의 목적은 하천 관리자들에게 하천의 자연성 증진의 중요성을 이해시키고, 하천을 자연스러운 상태로 되돌리는 과정에서 하천이 처한 상황에 대한 진단과 처방을 위한 하천자연도 평가 방법을 개발하는 것이다. 본 연구에서는 하천의 자연도평가와 그 적용성의 확인을 위해 수로의 발달, 종방향, 횡방향, 하상구조, 저수로변 구조, 하천주변, 수질 등 7가지 자연도 평가기법의 항목을 제안하였다. 자연도평가를 위해 복하천을 대상하천으로 선정하였다. 복하천에서 자연도지수는 $2.2{\sim}3.8$정도였고, 평균지수는 3.1로 대부분이 3등급을 나타내었다. 7개 지수 중에서 횡단면이 가장 높은 등급이었고, 수로의 발달이 가장 낮은 등급이었다. 본 연구에서는 하천의 자연도 등급을 통해 하천의 자연성을 파악할 수 있었으며, 복원해야 할 하천의 선택과 훼손된 하천의 복원구간 및 방법을 결정할 수 있었다.

• Journal of the Korean Wood Science and Technology
• /
• 제44권3호
• /
• pp.315-322
• /
• 2016

2개 이상의 보부재 집성재 요소들의 측면접착으로 제작된 "블록접착집성재"는 대단면 목조건축물의 건축부재로 활용 가능한 구조용재다. 블록접착집성재의 측면은 접착제의 종류와 도포량 및 압체압력을 각기 다른 조합으로 접착하여 박리시험과 전단블록시험으로 접착성능을 검토하였다. 실험결과 레조시놀접착제 $500g/m^2$을 도포하고 압체압력 1.5 MPa의 조건으로 제작된 블록접착집성재의 측면접착성능이 가장 양호하였다. 양호한 측면접착조건으로 제작된 블록접착집성재는 동일단면계수의 대조군 집성재와 휨 강도 성능을 비교 검토하였다. 블록접착집성재의 휨 탄성계수는 대조군 집성재와 유사하였으며, 파괴계수는 대조군집성재 보다 27% 향상되었다. 할렬은 대조군집성재 보다 블록접착집성재에서 다량 발생하였으며, 블록접착집성재의 측면접착층에서 계면파괴나 응집파괴는 관찰되지 않았다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1476-1479
• /
• 1996

발전설비나 자동차 그리고 항공우주분야에 사용되는 각종 bearing, 원형부품들에 사용되는 ring을 생산하는 방법중, 가장 효과적이고 경제적인 방법은 ring rolling (ring 압연)이다. 이 방법은 직경 50cm에서 2m이상의 원형 ring을 연속적으로 짧은 시간내에 (한 ring당 약 1분) 생산 가능하다. 이제까지의 수학적 모델을 사용한 제어시스템은 ring의 단면적이 사각형인 제품에는 최소한의 오차로 생산 가능하였으나, plant의 생산성과 제품의 다양성을 위하여 ring의 단면적이 복잡한 것을 생산시에는 문제점이 노출되었다. 왜냐하면 기존의 수학적모델이 roll gap 또는 metal forming zone에 근거하여 modelling하였기 때문이다. 본 논문에서는, 이러한 문제점을 고전적인 수학적 모델을 기초로한 adaptive control system의 방법대신에, 축적된 control system설계와 운용 경험을 이용하여 설계한 퍼지제어기 및 그것의 실적용 그리고 그 결과를 소개한다. 실적용 결과는, 제조된 단면적이 상대적으로 복잡한 bearing의 형상이 (filling grad)이 제어기의 제어정도 판단기준이었는데, 99.5%의 형상도를 보임으로서 industry에서 요구하는 제품기준을 만족시켰다. 또한 짧은 제어기 설계 및 on-line optimization 기간 또한 이 제어기의 장점이었다.