The purpose of this study is to help operate and manage the new food period, use-by-date by investigating consumer perception of various food periods, and change of purchasing and consumption period by food period label. Compared to the purchasing period of sell-by-date, the ratio of the purchasing period also increased as the proposed period of the use-by-date and the best before date increased. The use-by-date should be set at least 15 days to reduce food waste as the consumption period is the same as the sell-by-date. This can be said to have an anchoring effect that changes the purchasing and consumption period of consumers depending on how much the food period is indicated even for the same product. In order to reduce consumer confusion and food waste due to sell-by-date, it is considered to label the sell-by-date and use-by-date or use-by-date and best before date in parallel.
Consumers empty perfectly safe to intake perishable foods everyday if they are older than what prints on expiration date. The variation in expiration dating is freshness labeling represented in various terms such as sell by, package, best before, and so on. Regardless of the terms used and meanings are attached, consumers tend to conceive of freshness labeling on food as end of its shelf-life. Consequently, the food waste becomes a big issue for businesses in food sector. In an effort to demonstrate flexibility on this, KFDA(Korea Food & Drug Administration) introduced "best before" date in domestic market place to reduce food waste, based on the food safety test conducted by KCA(Korea Consumer Agency 2009). The results indicated freshness labeling on food should not be considered as the end of its life. Current study examined the underlying mechanisms(i.e. risk perception, self-construals, and indecisiveness) that influence consumers' intention on prolonged consumption of food beyond its stamped date when the KCA test results are shown to them. In addition, the moderating effect of regulatory focus is tested in the causal relationships between underlying mechanisms and different groups of prolonged consumption intention. Study participants are divided into three groups of prolonged consumption intention: no-change, moderate-change, and wide-change. The group with moderate-change in intention being as our point of reference, logistic regression analyses are conducted on 276 sample population. The results indicated that consumers with high source credibility risk are likely to show wide-change in intention on prolonged consumption while physical risk did not show significance. The consumers with independent self-construal are likely to show no-change in intention on prolonged consumption while interdependent self-construal did not show significance. Indecisiveness showed association a group with wide-change in intention on prolonged consumption. The moderating effect of regulatory focus showed valid results in most situations; the promotion-focused consumers showed wide-change in intention, while prevention-focused consumers showed no-change in intention. Furthermore, the moderating effect of promotion-focus showed a dominant position over the causal effect of indecisiveness in which decisive consumers(i.e. no-change in intention); if they are promotion-focused they tend show for the wide-change in intention instead. It is important to note that for those promotion-focused consumers(or situations), promotion-related arguments are more effective, while for those prevention-focused consumers(or situations) prevention- related arguments are more effective means of persuasion.
Journal of the Korean Society for Aviation and Aeronautics
/
v.8
no.1
/
pp.83-95
/
2000
Lift, drag, pitching moment, what we call longitudinal aerodynamic coefficient, effects airplanes directly, so the method to find the accurate result quickly is an important factor from the beginning of the aircraft design. There are different ways to find aerodynamic coefficient such as empirical methods, numerical analysis methods, wind tunnel tests, and finally through an actual flight tests, but choosing the best methods depends on the due date or the cost. The accuracy varies on each design level, but all this methods have relationship to complement and balance each other, so by combining proper methods, the best result can be obtained. At this paper, empirical methods and numerical analysis method were experimented, compared, and reviewed to find the availability of each method and by combining two methods accurate result was obtained. So, we applied this methods to predict the aerodynamic coefficient on cruise configuration aircraft, and was able to obtain more accurate result on the low speed longitudinal aerodynamic coefficient. Also by watching there result, we are able to predict the errors before the actual wind tunnel test.
Proceedings of the Korea Society for Simulation Conference
/
2003.11a
/
pp.3-10
/
2003
Developments in science and technology based on computer technology influenced military fields and created up-to-date weapons and equipment, and as a result, which is changing the war accomplishing methods of the future warfare. Due to these changes in the war accomplishing methods, the army command centers are requested to make changes in their decision-making process. In other words, they need to apply more scientific methods rather than just build a scheme by the mere analysis of commanders and the staffs as in the past. Consequently, we propose a model, Vision 21 we developed as a war game model for division-size unit analysis use, in the COA development process, which is the most important part in establishing the OPLAN for mission accomplishment. Vision 21, with a comparative analysis of the other COA built in the COA development process, can be applied to making the best COA. Model employment concept can let us choose the best COA, operating war games on condition that the COA of the opposite forces is fixed and ours sequentially opposed against, and with a comparative analysis also. Moreover, if the time available is limited, before establishing several courses, we can apply the COA to the process for making the best decision, analysing in stages or by main phases and not establishing several courses for a special purpose.
Background: This study was carried out to determine the best time for collecting ginseng berries without reducing the ginsenoside-Re content of ginseng roots, which are used as food, medicine, or cosmetic materials. Methods and Results: The test variety of ginseng used in this study was is Chunpung, which was collected from a 4-year-old ginseng field. Ginseng berries were collected at 7, 14, 21, 28, 35, 42, 49, and 56 days after flowering. The number of berry bunches per $1.62m^2$ ranged from 43.4 to 61.4, while the weight of berries per $1.62m^2$ was the greatest when they were collected 49 days after flowering. The root fresh weight per $1.62m^2$ was increased by 0.21 - 1.00 kg compared with that before the test, but root weight gain was decreased as the berry collection time was delayed. Total ginsenoside content of 4-year-old ginseng was the highest when berries were collected 7 days after flowering, while the ginsenoside-Re contents was the highest when collection was done 14 days after flowering. Conclusions: The most suitable period for ginseng berry collection was proposed to be from 14 to 21 days after flowering, as this is when the content of ginsenoside-Re, which is useful as a medicinal or cosmetic material, is still high and the ginseng root has not yet decreased in weight.
The Transactions of the Korea Information Processing Society
/
v.6
no.2
/
pp.261-274
/
1999
Recently, automated business processing systems, so called workflow systems, have been studied. have been studied. even though each task has noticible duration inherently, most of previous models regard it as a simple finite automation where state transitions occur instantly. In this paper, we propose a modeling method for workflow each of whose component task has minimum processing time and due-date. Firstly we provide a priority function to choose the proper alternatives when tasks fail before their due-date. The priority function considers the time-relevant factor and the semantic compatibility level to decide the best alternative. secondly, we identify six different types of execution requirements for tasks with noticible durations. They are serial, parallel, simultaneous start simultaneous termination, interleaved and nested dependency. Note that previous models deal with only serial execution and parallel execution. Lastly, we also propose graph-based methods to detect logical conflicts in time constraint-based workflow specifications.
Experiments were conducted to investigate the optimum season for mulberry graftages harvesting before the period of natural leaf fall in autumn. Harvesting season was examined at 10 days intervals from September 30 to November 20, 1985 and 1986, at nine sites in eight provinces. The results were : 1. Diameter of graftages increased until October 30. 2. Early harvest of graftages decreased survived rate, number of shoots, and total shoot length the next spring. The October 30 harvest yielded the best growth the following spring. 3. Harvests after October 20 allowed for good survial of mulberry shoots and sprouting the following spring. 4. Total N and P in plants increased with late harvests, K decreased, and Ca content was not affected by harvest date. 5. Total N, P, and Ca were higher in stem cortex than root bark, while K appeared to be equally distributed between root and shoot bark.
It is very important to determine the age of the Cultural Properties in archeology. In about 1950, W.F. Libby and a team of scientists at the University of Chicago developed the Radiocarbon Dating technique. Radiocarbon($^14$C) Dating is probably one of the most widely used and best known absolute dating methods. Radiocarbon ages are conventionally specified to the year 1950. This year is 0 BP year. BP is the initial of Before Present. The $^14$C within an organism is continually decaying into stable carbon isotopes. When $^14$C decays, it emits a $\beta$ - particle with an energy content of 156 KeV and becomes 14N. Only the $\beta$ - particle is detected by Liquid Scintillation Counting. $^14$C has a half life of 5730 years. It has been used to date samples as old as 50,000 years. Radiocarbon determinations can be obtained on organic material : wood, charcoal, shell, etc. The results of radiocarbon dating using Benzene Synthesizer and Liquid Scintillation Counter are KCP539 $4030\pm60$BP year, KCP540 $3980\pm60$BP year, KCP575 $4870\pm50$, KCP576 $100\pm50$BP year, KCP577 $130\pm50$BP yea and KCP578 $210\pm70$BP year.
The Mahan's seapower theory has been the basis of US Navy to date as it can enjoy the supremacy status in all of the seas of the world. His theory is very straightforward. A nation can be a great country in the world just through the use of maritime commerce that could be protected by a strong and powerful navy. Mahan's theory on seapower was substantiated in the Spanish-American War with respect to how important the naval power is. The best thing to make US a great nation was to make sure that flow of international trade is smooth, and the unhindered trade could be made possible only by the destruction of enemy's fleet that may obstruct the SLOCs. That's why Mahan insisted that a strong navy was needed and a decisive battle by the navy's fleet at sea should be encouraged as a way of ensuring the safety of the SLOCs. The newly-arrived Trump administration seems to be in line with the Mahan's theory seapower in its policy on naval forces structure. It is expected that US will continue to support the Pivot to Asia policy that has been adopted by the previous administration through an increase in its naval fleet forces. The number of US navy ships will be 355 in 2030, rendering it much more powerful navy than before. The catch phrase "3rd Fleet Forward" proposed by the president Trump indicates that two carrier strike groups will be present in the Asia Pacific region, being able to make the confrontation between US and China more tense than before. The presence of the US naval forces in the area may function as some sort of pressure against China that Trump insisted had been responsible for the closure of 60,000 factories and the loss of 3,000,000 jobs in the United States.
Journal of the Korean institute of surface engineering
/
v.1
no.1
/
pp.5-13
/
1967
Up to this date, numerous methods of analysis of electropling solutions are published. Some, however, need lots of works before reaching final results, or require high technique and special instruments, and also some are unaccurate due to unclearnes of end point. Like our undevelop countries, technicians of electroplating shops are most high school graduates or under, and have not much knowledge on chemistry. Furthermore, those technicians have to control their plating solutions by themselves without having enough analytical laboratory equipment . Therefore, in this paper the simplest, besides accurate method is investigated after comparing numerous methods published. Among the methods of copper determinations from acid and alkaline copper plating baths, EDTA titration method are chosen, due to these methods are the simpest and fastest for the evaluation of metal content, without requirng any special instrument. For acid copper solutions, chelate titrations were accurate enough. Since the end point of titration of chelate method is variable according to the kind of indicators and other metal's coexisitence as well as solution component, many difficulties were encountered from cyanide copper, on the contrary of acid copper bath. PAN , PV, and MX indicators were tried , but it is found that MX is the best. In chyanide solution ,due to cyanide is the masking reagent , elimination of this component is essential , and finally found that elimination CN-by precipitation with AgNO$_3$ solution was the simplest and the most accurate way among others. This method was very accurate for the new plating solutions even coexistence with organic brightners. However used solutions for long months running have to be predetermined the accurate copper value by thiosulfate method form time to time, before chelate titration by means of AgNO$_3$ precipitation. Always some constant deviations will be seen according to the solutions nature. Therefore those deviation values have to be compensated each time.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.