• 한국재료학회지
• /
• 제21권12호
• /
• pp.650-654
• /
• 2011

In this paper, the effects of conventional and newly developed elastomer modified underfill materials on the mechanical shock reliability of BGA board assembly were studied for application in mobile electronics. The mechanical shock reliability was evaluated through a three point dynamic bending test proposed by Motorola. The thermal properties of the underfills were measured by a DSC machine. Through the DSC results, the curing condition of the underfills was selected. Two types of underfills showed similar curing behavior. During the dynamic bending reliability test, the strain of the PCB was step increased from 0.2% to 1.5% until the failure circuit was detected at a 50 kHz sampling rate. The dynamic bending reliability of BGA board assembly using elastomer modified underfill was found to be superior to that of conventional underfill. From mechanical and microstructure analyses, the disturbance of crack propagation by the presence of submicron elastomer particles was considered to be mainly responsible for that result rather than the shear strength or elastic modulus of underfill joint.

• Advances in materials Research
• /
• 제9권1호
• /
• pp.63-98
• /
• 2020

The novelty of this paper is the use of a simple higher order shear and normal deformation theory for bending and free vibration analysis of functionally graded material (FGM) beams on two-parameter elastic foundation. To this aim, a new shear strain shape function is considered. Moreover, the proposed theory considers a novel displacement field which includes undetermined integral terms and contains fewer unknowns with taking into account the effects of both transverse shear and thickness stretching. Different patterns of porosity distributions (including even and uneven distribution patterns, and the logarithmic-uneven pattern) are considered. In addition, the effect of different micromechanical models on the bending and free vibration response of these beams is studied. Various micromechanical models are used to evaluate the mechanical characteristics of the FG beams for which properties vary continuously across the thickness according to a simple power law. Hamilton's principle is used to derive the governing equations of motion. Navier type analytical solutions are obtained for the bending and vibration problems. Numerical results are obtained to investigate the effects of power-law index, length-to-thickness ratio, foundation parameter, the volume fraction of porosity and micromechanical models on the displacements, stresses, and frequencies.

• 대한물리의학회지
• /
• 제9권4호
• /
• pp.425-432
• /
• 2014

PURPOSE: The purpose of this study was to investigate that the differences in sternocleidomastoid muscle activity, neck rotation angle, neck lateral bending angle and neck lateral bending onset time between conditions with and without visual biofeedback during neck rotation. METHODS: Ten male and four female adults with condition of forward head posture were recruited in this study. Subjects conducted to left and right maximal neck rotation under the conditions with and without visual biofeedback. During neck rotation, kinematic data of neck rotation, neck lateral bending movement, and electromyography activities of bilateral sternocleidomastold muscles were collected. Differences in dependent variables between conditions with and without visual biofeedback were analyzed using paired t-test. RESULTS: There were significant decreases in lateral bending angle, while lateral bending movement onset time was delayed significantly when applying visual biofeedback (p<.05). However, there were no significant differences in the activation of left and right sternocleidomastoid muscles and neck rotation angle between conditions with and without visual biofeedback (p>.05). CONCLUSION: These findings suggest that visual biofeedback may be effective for axial rotation of cervical spine during neck rotation in adults with forward head posture.

• 한국전기전자재료학회논문지
• /
• 제21권7호
• /
• pp.669-673
• /
• 2008

ITO thin film was deposited on PC substrate in Facing Targets Sputtering (FTS) system with various sputtering conditions. After it is applied to external bending force, we investigated how change the surface and electrical property of as-deposited ITO thin film. As the L(face-plate distance) of substrate decreases, it found that the maximum crack density is increasing at the center position and decreasing crack density as goes to the edge. So to apply same curvature (r) and bending force to PC substrate with ITO thin film, we fixed the L that is equal to curvature radius (2r). Before bending test, ITO thin films that deposited in the input current of 0.4 A and thickness of 200 nm already had biaxial tensile failure because of each different CTE (Coefficient of Thermal Expansion) and Others had been shown no bending or crack. After bending test, all samples had been shown cracks at about 200 times and as increasing the crack density, resistivity increased.

• 한국해양공학회지
• /
• 제3권2호
• /
• pp.577-577
• /
• 1989

In this paper, a detail evaluation of ultimate strength of offshore unstiffened tubular members with bending and local denting damage which are subjected to combined axial force and bending moment and to component load is presented through theoretical and experimental approaches. Based upon the results obtained here, the damage effect on the ultimate strength of tubular member under combined loads and component load is investigated.

• 한국해양공학회지
• /
• 제3권2호
• /
• pp.77-86
• /
• 1989

In this paper, a detail evaluation of ultimate strength of offshore unstiffened tubular members with bending and local denting damage which are subjected to combined axial force and bending moment and to component load is presented through theoretical and experimental approaches. Based upon the results obtained here, the damage effect on the ultimate strength of tubular member under combined loads and component load is investigated.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 추계학술대회논문집
• /
• pp.701-707
• /
• 2000

In this work, we propose to employ magnetostrictive sensors to develop a new non-contacting modal testing method. Specific applications are made in the modal testing of a beam in bending. The role of bias magnetic fields in measuring bending waves is addressed and an approximate analysis to explain the principle to measure bending signals is carried out. The measured modal data by the present method agree well with those by conventional methods using accelerometers.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 추계학술대회 논문집
• /
• pp.217-218
• /
• 2006

• 대한기계학회논문집A
• /
• 제21권7호
• /
• pp.1050-1057
• /
• 1997

The sheet bending with large radius of curvature is analyzed with both theoretical and experimental methods. Sheet bending in elastic limit is accomplished by the plastic deformation of flange. The springback model is developed theoretically and the effects of the factors are evaluated. The prediction accuracy of the model is also evaluated by comparing with the experimental data. Finally, an algorithm to design the sheet-bending die is suggested for usage in industry.

• Structural Engineering and Mechanics
• /
• 제53권4호
• /
• pp.781-790
• /
• 2015

We apply higher-order beam theory to analyze the deflections and stresses of a cantilevered single leaf flexure in bending. Our equations include shear deformation and the warping effect in bending. The results are compared with Euler-Bernoulli and Timoshenko beam theory, and are verified by finite element analysis (FEA). The results show that the higher-order beam theory is in a good agreement with the FEA results, with errors of less than 10%. These results indicate that the analysis of the deflections and stresses of a single leaf flexure should consider the shear and warping effects in bending to ensure high precision mechanism design.