• Structural Engineering and Mechanics
• /
• v.57 no.2
• /
• pp.265-280
• /
• 2016

A NLFE model was proposed to investigate the mechanical behavior of short columns, cast using plain or fibrous lightweight aggregate concrete (LWAC), and subjected to elevated temperatures of up to $700^{\circ}C$. The model was validated, before its predictions were extended to study the effect of other variables, not studied experimentally. The three-dimensional NLFE model was developed using ANSYS software and involved rational simulation of thermal mechanical behavior of plain and fibrous LWAC as well as longitudinal and lateral steel reinforcement. The prediction from the NLFE model of columns' mechanical behavior, as represented by the stress-strain diagram and its characteristics, compared well with the experimental results. The predictions of the proposed models, considering wide range of lateral reinforcement ratios, confirmed the behaviors observed experimentally and stipulated the importance of steel confinement in preserving post-heating mechanical properties of plain and fibrous LWAC columns, being subjected to high temperature.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.11a
• /
• pp.417-420
• /
• 2006

For a better understanding of the fracture behavior of concrete structures, knowledge of the post-cracking behavior of concrete material is essential. The tension softening diagram can describe the post-cracking behavior of concrete in tension. In this paper, Four points bending tests with a notch have been carried out to investigate tensile properties of the steel fiber reinforced concrete(SFRC). Poly-linear approximation method combined with FEM analysis is applied to the steel fiber reinforced concrete to determine the tension softening diagrams and also to certify the validity of the method. The simulated load-CMOD curves using the determined softening diagrams though the poly-linear approximation method completely agree with the measured ones.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.10a
• /
• pp.183-185
• /
• 2008

Forming Limit Diagram(FLD) is a representative tool for evaluating formability of sheet metals. This paper presents a methodology to determine the FLD using Finite Element Method. For predicting the forming limits numerically. Previous methods such as using the thickness strain or the ductile fracture criterion are limited at plane strain domain. These results suggest that behavior of the void growth in sheet metals is different from real one. In contrast to previous methods, a more exact model which takes void growth into account is used. This result agrees with the experimental result qualitatively.

• Journal of Korea Multimedia Society
• /
• v.18 no.11
• /
• pp.1281-1288
• /
• 2015

Nongroup Cellular Automata(CA) having two trees in the state transition diagram of a CA is suitable for pattern classifier which divides pattern set into two classes. Maji et al. [1] classified patterns by using multiple attractor cellular automata as a pattern classifier with dependency vector. In this paper we propose a method of generation of a pattern classifier using feature vector which is the extension of dependency vector. In addition, we propose methods for finding nonreachable states in the 0-tree of the state transition diagram of TPMACA corresponding to the given feature vector for the analysis of the state transition behavior of the generated pattern classifier.

• Journal of information and communication convergence engineering
• /
• v.6 no.3
• /
• pp.279-284
• /
• 2008

We propose the iconic animation of the software requirement specifications by using the object and dynamic models of the object modeling technique(OMT) methodology. In order to produce the iconic animation, we use "graphical classes" and "icon transformations." In general, the graphical classes are defined for each class of the object diagram. The icon transformations which show the activities of the application are constructed by considering the meaning of the activities and are defined by either basic or compound icons. The icon transformations are added to the state diagrams to generate extended state diagrams. The animation system generates the header files and the code instantiating GUI from the object diagram having graphical classes. The system also generates "event methods" from the extended state diagrams. When the event methods are executed, the behavior of the events is animated by the icon transformations.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1565-1568
• /
• 1996

The adsorption and desorption behavior of orgnaic gases were investigated using the resonant frequency and admittance method. Sensitive material were depositied on the quartz crystal microbalence by using Langmuir-Blodgett method. To investigate the response characteristics of organic gases, Resonant frequency-Resonant admittance (F-A) diagram was used. The quantity and quality information about organic gases can be obtained by that diagram. As a results, when the organic gases were adsorpted into sensitive material, the physical property changees of sensitive material were occured.

• Polymer(Korea)
• /
• v.27 no.5
• /
• pp.413-420
• /
• 2003

Fluorescence microscope technique was employed for the characterization of phase separation behavior of a 4-chloro-7-nitrobenzofurazan labeled polystyrene (PS) / polybutadiene (PB) blend in dioctyl phthalate under steady shear. It was confirmed that the fluorescence microscope images reflect the real phase morphology by comparing with the images of phase contrast microscope. Comparing the fluorescence intensities from the phase separated domain (PS rich) and continuous phase (PB rich), the composition difference between these two phases were deduced. The observed shear dependence of compositional change is then used to confirm that the phase diagram is indeed shifted under the steady shear.

• Journal of Power System Engineering
• /
• v.9 no.4
• /
• pp.83-89
• /
• 2005

Molding shrinkage is one of the problems to be solved in conventional injection molding. Despite many trying-out has been to solve it, intrinsic cause of shrinkage such as orientation and thermal exchange between melt and mold has not been solved yet. For reducing shrinkage and residual stress on molding, injection compression molding process was invented. In this study, experiments about effects of injection compression molding's parameters on shrinkage of PMMA molding were conducted and compared with conventional injection molding's shrinkage. Before the injection compression molding experiment, molding shrinkage rate was predicted by analyzing pvT diagram and was compared with the results of experiment. The shrinkage rate of injection compression molding was lower than convention injection molding's one which was different from the predicted shrinkage. The reason was observed that the experimental mold was not a proper type for injection compression, flowing backward of melt into nozzle and unreasonable mechanism of injection molding machine.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2005.10a
• /
• pp.225-231
• /
• 2005

This study aims to suggest an evaluation methodology of green-tourism potential for village level with amenity resources in rural areas. The amenity resources system was classified into three sub-classes(social, industrial, and natural/cultural/historical resources) and a relationship diagram between three classes and tourists' behavior was also defined. The methodology considers human resources in the village including the three sub-class amenity resources. The table and diagram were applied to make renewal plan for rural villages of the study area, Nami-myun, Keumsan-gun, Chungnam province, so that the development scheme for the villages was suggested reasonably by the new findings of this study.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1992.04a
• /
• pp.80-85
• /
• 1992

A nonlinear second-order analysis program that properly describes the nonlinear behavior of concrete was developed by using the layering technique. As the slenderness ratio of column is increased, the peaks of P-M curve lie remote from the section interaction diagram for the same eccentricities. But the peaks of P-M curve lie rather close to the section interaction diagram for very large eccentricities. In this study , the effects of compressive strength of concrete, longitudinal steel ratio, and yield strength of steel on second-order moment of concrete columns were analyzed. As the compressive strength of concrete and the yield strength of steel are increased, the ratio of peak axial force to maximum axial strength for concentrically loaded short column( Pu/Po) is decreased. But as the longitudinal steel ratio is increased, the ratio , Pu/Po increases.