• Journal of the Korean Society of Safety
• /
• v.9 no.1
• /
• pp.9-18
• /
• 1994

In this study, we conducted experimental tests to evaluate fracture behaviors of fresh-butt welded metal by Acoustic Emission technique. We selected similar welding and dissimilar welding process, the one welded for SM45C, SS41 and SUS304 of each material, the other for SM45C and SS41, SM45C and SUS304 and SS41 and SUS304. The fracturing processes of weld metal were estimatied through the fracture toughness test with compact tension specimens and fractography analysis. In ASTM test method E-399, type I curves for materials of this study were obtained by load-cod diagram of fracture toughness test. and 5% offset load( $P_{5}$) was estimated as the estimated crack initial load( $P_{Q}$), The estimated crack initial load( $P_{Q}$) of similar welding materials generally lower than base matal, and then SM45C appeared greatly in decreasing rate of PB, SS41 and SUS304 appeared in order. $P_{Q}$ of dissimilar welding materials were lower than the similar welding materials. $P_{Q}$ of welding of SM45C and SS41 appeared in small, SUS304 and SS41 appeared greatly in dissimilar welding materials. In fracture toughness test, AE counts increased before the inflection point of the slope, decreased after that. It was found that increasing of AE counts were due to the microcrack formation at the crack tip near the $P_{5}$ point through AE data. For welding materials in this study, both low and high AE amplitude appeared simulataneously. It was confirmed that the low AE amplotude was due to formation of micro void, micro crack or micro dimple, the high AE amplitude was caused by microvoid coalescence and quasi-cleavage fracture through analyses of fractograpy.apy.apy.apy.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.5B
• /
• pp.777-784
• /
• 2010

In modern information society, the necessity arose of having to manage overall information technology as information technology is introduced to companies and public organizations while the necessity of joining the goals of business and IT is increasing. Also, there has been an increase in organizations which are preventing the overlapping of IT investigations and pursuing ROI. Hereupon, many developed companies created the concept of IT governance. IT governance indicates the structure and dynamic behavior of companies' business and the structural affecting factors influencing IT, and this is expressed as business, the business & IT related committees and departments inside and outside, the framework representing their relationship and range of activity, organizational diagram and process composition. Intermingled with such external factors, the reestablishment of defense IT governance in order to reach the vision and goal of our current military defense has become a requirement. This study aims to describe core strategy for building defense IT governance framework. In order to support these claims, the comprehensive IT governance and information technology are mentioned, domestic and overseas military cases are analyzed, and core strategy for building defense IT governance framework is analyzed as well.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.5
• /
• pp.49-58
• /
• 2003

Underground flexible pipes for electric cables are subject to external loads and surrounding soil pressure. Particularly, strain of flexible pipes is of great concern in terms of safety and maintenance for electric cables. In this paper, stress and strain of flexible pipes with various installation depth are compared using traditional formula, FEM analysis, model soil box test and field test. from the findings of various analyses, considering the strain criteria-maximum 3.5%, it is suggested that flexible pipes can be buried at the depth of 80cm without additional soil improvement.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.4
• /
• pp.65-74
• /
• 2004

Based on the field measuring data obtained from seven excavation sections in Inchon International Airport Project, the horizontal displacement of sheet piling walls supported by anchors and the lateral earth pressure acting on sheet piling walls was investigated in soft ground. The proposed diagram of lateral earth pressure is a rectangular form, and the maximum earth pressure corresponds to $0.6\gamma H$. The maximum earth pressure is similar to the empirical earth pressure proposed by NAVFAC(1982). The quantitative safe criterion of sheet piling walls with struts is established from the relationships between increasing velocity of maximum horizontal displacement and stability number in excavated ground. If the velocity of maximum horizontal displacement shows lower than 1mm per day, the sheet piling walls exist under stable state. When the velocity of maximum horizontal displacement becomes more than 1mm and less than 2mm per day, excavation works should be observed with caution. Also, when the velocity of maximum horizontal displacement becomes more than 2mm per day, appropriate remediations and reinforcements are applied to sheet piling walls.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.4
• /
• pp.83-93
• /
• 2003

This research, in order to study the effects of initial shear stress of anisotropically consolidated sand that has 0.558% fines, performed several undrained static and dynamic triaxial test. To simulate the real field conditions, loose and dense samples were prepared. Besides, the cyclic shear strength of Nakdong River sand under various combinations of initial static shear stress, stress path, pore water pressure and residual strength relationship was studied. By using Bolton's theory, peak internal friction angle at failure which has considerable effects on the relative density and mean effective stress was determined. In p'- q diagram, the phase transformation line moves closer to the failure line as the specimen's initial anistropical consolidation stress increases. Loose sands were more affected than dense sands. The increase of consolidation stress ratio from 1.4 to 1.8 had an effect on liquefaction resistance strength resulting from the increase of relativity density, and showed similar CSR values in dense specimen condition.

• The Korean Journal of Rheology
• /
• v.9 no.4
• /
• pp.174-182
• /
• 1997

결정성 고분자수지는 가공조건에 의해 결정되는 미세구조의 변화에 따라 최종물성 이 현저히 달라지므로 최종 성형품의 물성을 극대화하기 위해서는 성형가공 중에 필연적으 로 부가되는 열이력 뿐만 아니라 전단이력이 결정화 거동에 미치는 영향을 규명하고 가공조 건의 최적화를 통하여 미세구조를 적절히 제어하는 것이 요구된다. 따라서 본 연구에서 in-situ 상태로 전단유도 결정화거동을 조사할수 있는 rheo-kinetic 실험 방법을 개발하고 결정화 거동에 미치는 열이력과 전단이력의 영향을 규명하고자 하였다. 이를 위해 비교적 결정화 속도가 빠른 폴리 부틸렌 테레프탈레이트 수지를 대상으로 냉각조건, 전단부가시간, 전단속도등을 다양하게 변화시키면서 plate-plate 레오미터로 시간에 따른 전단응력의 변화 를 조사하는 rheo-kinetic 연구를 수행하였다. 아울러 실험 중에 액체 질소로 급냉하여 얻은 시료를 대상으로 등온 및 비등온의 열분석 실험을 수행하고 JMA식과 Hoffman-Lauritzentlr 을 사용하여 분석한 다음, 그 결과를 rheo-kinetic 해석결과와 비교함으로써 결정화 거동에 미치는 전단응력의 영향을 규명하였다. 일정전단속동하에서 수행한 rheo-kinetic 실험결과, 시간에 따른 저난응력의 증가와 용융열이 증가하는 경향이 매우 유사한 거동을 보이므로 전 단응력의 증가는 결정화가 일어남에 기인한 결과임을 확인할수 있었으며 고분자수지가 전단 이력을 받게 되면 분자배향의 결과로 결정화 유도시간이 짧아지고 결정화속도가 증가할 뿐 만 아니라 보다 더 높은 온도에서 결정화가 일어나게 됨을 알수 있었다. 또 결정화 반가기 시간과 Hoffman-Lauritzen 식의 매개변수들이 전단속도, 전단부가시간, 결정화 온도 등의 이력에 무관하게 전단응력에 따라 선형적으로 변하고 있으므로 전단유도 결정화거동은 수지 에 부가되는 전단응력에 직접적인 영향을 받음을 알수 있었다. 이상과같은 전단유도 결정화 거동에 관한 결과를 가공공정상의 열전달 현상과 결합하여 해서하면 성형품 내부의모폴로지 의 예측이 가능하므로 성형품 물성의 극대화 방안의 수립에 이용될수 있을것으로 사료된다.

• Korean System Dynamics Review
• /
• v.16 no.3
• /
• pp.5-29
• /
• 2015

The importance of the concept of safety culture has increased in the security of high-risk facility after Chernobyl accident in 1986. This paper elaborated the concept of safety culture and its main factors by Causal Loop Diagram. Due to the decline of safety culture, the occurrence of incidents and accidents require more and more corrective actions to the members of high-risk facilities and thereby increasing their workloads. Employees who must complete the task within the given time have to have time pressures and don't comply with the rules and procedures. Also, a schedule pressure is a big stress for employees, causing mistakes in precision work. In order to improve these problems, CLD of the safety culture in this paper suggests hiring more workers, re-allocation of given workloads and strengthen the learning, communication capabilities and safety leadership. In addition, the two real accident cases were analyzed to test the feasibility of the System Dynamic simulation model through the process of structuring the fault trees on the stationary black out accident in Kori unit 1 in South Korea and Kleen Energy power station explosion in US. The simulation results show that the various safety factors cause the serious accident combined with mechanical failure and safety culture will reduce the possibility of the accidents in these high-risk organizations. This simulation model can contribute to analyzing the impact of the organizational and human factors of safety culture and can provide the alternatives in high-risk facilities.

• Journal of Korea Foundry Society
• /
• v.26 no.1
• /
• pp.17-26
• /
• 2006

The substitution of cooling method from water quenching to air cooling after solution heat treatment was aimed for the development of a convenient and economical heat treatment process of duplex stainless steels without deterioration of mechanical and corrosion resistant properties for the industry. In order to achieve this goal, the mechanical properties and corrosion properties of a ASTM A890-4A duplex stainless steel were systematically investigated as functions of casting condition and cooling method after solution heat treatment. A 3-stepped sand mold and a permanent Y-block mold were used to check the effects of solidification structure and cooling rate after solution heat treatment. The microstructural characteristics such as the ferrite/austenite phase ratio and the precipitation behavior of ${\sigma}$ phase and carbides were investigated by combined analysis of OM and SEM-EDX with an aid of TTT diagram. Hardness and tension test were performed to evaluate the mechanical properties. Impact property at $-40^{\circ}C$ and corrosion resistance were also examined to check the possibility of the industrial application of this basic study. Throughout this investigation, air-cooling method was proved to effectively substitute for water-quenching process after the solution heat treatment, when the duplex stainless steel was sand mold cast with a thickness below 15 mm or permanent mold cast with a thickness below 20 mm.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.37 no.3
• /
• pp.55-62
• /
• 2000

This paper presents an analysis of the chaotic behavior in the discrete-time voltage mode chaotic generator fabricated using 0.8${\mu}{\textrm}{m}$ single poly CMOS technology. An approximated empirical equation is extracted from the measurement data of a nonlinear function block. Then the bifurcation diagram is simulated according to input variables and Lyapunov exponent λ which represent a dependence on an initial value is calculated. We show the interrelations among time waveforms, state transition, and power spectra for the state condition of chaotic circuit, such as equilibrium, periodic, and chaotic state. And results of experiments in the chaotic circuit with the $\pm$2.5V power supply and sampling clock frequency of 10KHz are shown and compared with the simulated results.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.4
• /
• pp.1263-1274
• /
• 1996

In this paper, as elastic-plastic fracture toughness test under mixed mode loading was proposed using a single edge-cracked specimen subjected to bending moment(M), shearing force(F), and twisting moment(T). The J-integral of a crack in the specimen is expressed in the form J=$J_I$+ $J_II$$J_III$, where $J_I$, $J_II$ and $J_III$ are the components of mode I, mode II and mode III deformation, respectively. $J_I$, $J_II$ and $J_III$ can be estimated from M-$\theta$ ($\theta$;crack opening angle), F-U(U; crack shear displacement) and T-$\alpha$ ($\alpha$;crack twisting angle). In order to obtain the the M<-TEX>$\theta$, F-U and T-$\alpha$ diagram inreal time, a new deformaiton gage for mixed mode loading was proposed using the optical position sensing device(PSD). The elastic-plastic fracture toughness test was carried out with an aluminum alloy. The loading apparatus was designed and manufactured for this experiment. For the loading condition of the crack initatio in the mixed mode, the MMT -3(mode I+ mode II+ mode III) has the lowest values out of the all specimens. This implies that MMT-3 is possible of the crackinitation at lower load, if the specimen acts on together with the torque under the same loading condition. An elastic-plastic fracture toughness test using the PSD brings a successful experimentation in measuring the crack deformation(mode I+ mode II+ mode III).