• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.1A
• /
• pp.34-40
• /
• 2009

In this paper, we derive the average received beampattern at each receive node which is randomly distributed within a disk when considering a collaborative beanforming between transmission nodes which are randomly distributed within another disk for ad hoc sensor network. Numerical results show that the radius of disk at the transmitter determines the beamwidth of mainbeam, and the sidebeam is affected by the number of transmitter nodes. We also consider K receive groups and divide the transmit sensor modes into K groups to support each receive group using beamforming, and derive the SINR at each receive node. Finally, we investigate the effects of beampattern and interference on total sum capacity among all receive node, and numerically determine the number of transmit nodes for each group which can achieve the maximal sum capacity.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.10
• /
• pp.1128-1136
• /
• 2012

In this paper, we propose an electrically tilting system based on a null-steering in order to solve the problem of the shadowing loss caused by the mechanically tilted antenna system in mobile services. Especially, we improve the downward shadowing loss by eliminating or moving the vertical beampattern nulls between $-30^{\circ}{\sim}0^{\circ}$ to be able to tilt the downward beampattern between $-10^{\circ}{\sim}0^{\circ}$. The antenna has 14.5 dBi gain and side lobe level (SLL) is lower than -18 dB within downward tilting range. The isolation of polarization is greater than 30 dB when running in electric tilt down to $-10^{\circ}$. To verify this paper, we made the base-station antenna for W-CDMA and beam tilting devices, and verified the performances.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.6
• /
• pp.689-697
• /
• 2016

In this paper, we design and implement SPA (Switched Parasitic Antenna) antenna which can control its beampattern using multiple parasitic elements. By applying SPA antenna to wireless communication system and implementing beamforming scheme, we show that SPA antenna can be used to improve the performance of wireless communication systems. SPA antenna consists of a single active antenna and multiple parasitic elements around the active one, and can control its beampattern by switching the parasitic elements. Using this characteristic of the SPA antenna, it is possible to impelemtent beamforming technique with single RF chain, which enables to design low cost, low complexity and low power wireless communication systems. In order to verify the beamforming gain, we measure and analyze the system level performance, such as SNR, PER, and throughput.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.3
• /
• pp.49-54
• /
• 1999

In this paper, we propose a new method to estimate the initial DOA of a new appearing source in wideband multisource beamforming and tacking with array sensor position calibration algorithm. By using a beampattern formula for initial DOA detection, the proposed method keeps estimation error within possible tracking range and can be applied to several beamformers with different mainlobe width by adjusting DOA resolution. The simulation results show the performances of source detection and tracking.

• IEIE Transactions on Smart Processing and Computing
• /
• v.3 no.4
• /
• pp.167-172
• /
• 2014

In this paper we propose a waveform design algorithm that localizes the maximum output power in the target direction. We extend existing monostatic radar optimal waveform design schemes to bistatic multiple-input multiple-output (MIMO) radar systems. The algorithm simultaneously calculates the direction of departure (DoD) and the direction of arrival (DoA) using a two-dimensional multiple signal classification (MUSIC) method, and successfully localizes the maximum transmitted power to the target locations by exploiting the calculated DoD. The simulation results confirm the performance of the proposed algorithm.

• Journal of Satellite, Information and Communications
• /
• v.5 no.1
• /
• pp.38-42
• /
• 2010

This paper shows that beamfoming module deign to adapt smart antenna system in CDMA2000 environments. The designed beamfroming module has been implemented on a general-purpose DSP as a test-bed to confirm the superior performances based on real-time processing. From the various simulation result, it is confirm that beamforming module is provide a superior beampattern in smart antenna system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.1
• /
• pp.1-11
• /
• 2004

This paper presents an implementation of smart antenna system channel card that executes modulation/demodulation. Operations and performances of modules of implemented channel card is confirmed and field test of channel card shows the performance of smart antenna systems. Based on the analysis obtained from the field test in cdma2000 1x environments which contains multipath lading, it is confirmed that smart antenna system channel card provide exact beampattern to the DOA and performance of proposed channel card has better FER by 5∼8 times, compared to 2 antenna diversity system.

• ETRI Journal
• /
• v.43 no.1
• /
• pp.120-132
• /
• 2021

A frequency diverse array (FDA) multiple-input multiple-output (MIMO) radar employs a small frequency increment across transmit elements to produce an angle-range-dependent beampattern for target angle and range detection. The joint angle and range estimation problem is a trilinear model. The traditional trilinear alternating least square (TALS) algorithm involves high computational load due to excessive iterations. We propose a fast-convergence trilinear decomposition (FC-TD) algorithm to jointly estimate FDA-MIMO radar target angle and range. We first use a propagator method to obtain coarse angle and range estimates in the data domain. Next, the coarse estimates are used as initialized parameters instead of the traditional TALS algorithm random initialization to reduce iterations and accelerate convergence. Finally, fine angle and range estimates are derived and automatically paired. Compared to the traditional TALS algorithm, the proposed FC-TD algorithm has lower computational complexity with no estimation performance degradation. Moreover, Cramer-Rao bounds are presented and simulation results are provided to validate the proposed FC-TD algorithm effectiveness.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.6
• /
• pp.559-567
• /
• 2020

This paper proposes a noise cancelling algorithm to remove own-ship noise for a towed array sonar. Extra beamforming is performed using partial channels of the acoustic array to get a reference beam signal robust to the noise bearing. Frequency domain Adaptive Noise Cancelling (ANC) is applied based on Normalized Least Mean Square (NLMS) algorithm using the reference beam. The bearing of own-ship noise is estimated from the coherence between the reference beam and input beam signals. Own-ship noise level is calculated using a beampattern of the noise with estimated steering angle, which prevents loss of a target signal by determining whether to update a filter so that removed signal level does not exceed the estimated noise level. Simulation results show the proposed algorithm maintains its performance when the own-ship gets out off its bearing 40 % more than the conventional algorithm's limit and detects the target even when the frequency of the target signal is same with the frequency of the own-ship signal.

• The Journal of the Acoustical Society of Korea
• /
• v.23 no.8
• /
• pp.570-575
• /
• 2004

In the underwater acoustic systems. we can receive signals and retrieve information about a target by using a beamforming method. The most important thing in the beamforming is finding the way to optimize the mainlobe beamwidth and the sidelobe level to the desired value. One of the prominent results of beamforming method. which has been studied. is Philip's weighting function method(1) . Philip's method adaptively adjusts its weights of array to meet the desired mainlobe beamwidth and sidelobe level. It is very similar to the design method in adaptive filter. However. this method cannot easily bring us to the desired sidelobe level due to complementary relation between mainlobe beamwidth and sidelobe level. In this paper, we propose a new algorithm using partial constrained adaptation. This method makes us circumvent the above problem and meet the specification of design easily. The proposed algorithm presents a Pattern synthesis that designer can easily control the mainlobe beamwidth and the sidelobe level to the desired value while calculation time to converge is decreasing.