• The Journal of the Acoustical Society of Korea
• /
• v.33 no.1
• /
• pp.48-53
• /
• 2014

The underwater acoustic communication (UAC) is characterized by doubly spread channel. It is included in the time-variant doppler shift and delay-time spreads due to multiple paths. To compensate such distorted signals, various techniques including time-reversal processing, spatial diversity, phase estimator, and equalizer are being applied. In this paper, a spatial filter based on the beamforming is proposed as a method to mitigate such inter-symbol interferences that are generated in time-varying multipath channels. The proposed technique realizes coherent communications by steering the direction of the desired signals and improves the performance of UAC by increasing the signal-to-interference plus noise ratio using the array gain.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.1
• /
• pp.43-52
• /
• 2010

In this paper, the mobile-WiMAX (m-WiMAX) using the Smart antenna technique is implemented. Experiments are performed to compare Smart antenna system with conventional single antenna system. To implement the m-WiMAX smart antenna system there are many considerations, key issues of which are symbol time acquisition, beamforming, calibration. In the paper, symbol time acquisition, beamforming, calibration are implemented in WiMAX Smart antenna system and we verified that Smart antenna system is superior to single antenna system. The experimental results show 5.5 dB performance enhancement of implemented Smart antenna system in throughput compared with a single antenna system. The experimental result is almost same as theoretical result of 6 dB.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.1
• /
• pp.32-35
• /
• 2018

Massive multiple-input multiple-output (MIMO) transmission is an essential technique for achieving the high bandwidth efficiency required in 5G mobile communication systems. Various forms of arrays can be used as the number of antenna elements increases for massive MIMO transmission. In this letter, we propose a beamforming algorithm applicable to multiuser MIMO transmission using uniform circular arrays. By employing quasi-orthogonal beam pairs obtained from the inter-beam correlation information, we minimize inter-user interference and evaluate the resulting performance gain.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.6
• /
• pp.63-67
• /
• 2014

A distributed zero-beamforming based cooperative jamming technique is useless when an eavesdropper detects the sharing seed. In addition, the currently alternatives are very limited when the eavesdropper is located nearby a source for wiretapping. This letter presents a solution to this extreme case. Relay randomly generates and transmits a binary jamming message to both source and destination in the first phase. When these two receivers securely and correctly decode the message, the source creates and transmits another message based on the use of exclusive-or for its information message and the decoded message. Consequently, the next transmission can avoid the eavesdropping.

• Journal of Communications and Networks
• /
• v.10 no.2
• /
• pp.148-155
• /
• 2008

In wireless data communication systems, retransmission of an erroneous packet is inevitable due to the harsh communication environment. In this paper, an efficient retransmission scheme using cooperation from neighboring nodes is investigated. In the cooperative retransmission scheme, an erroneous packet is transmitted to the destination by cooperative nodes which have favorable channels. This cooperative retransmission scheme requires no a priori information of neighboring nodes and has no limitation on the number of cooperating nodes. Distributed beamforming is used to accommodate multiple cooperating nodes. Phase and frequency offsets of cooperating signals are extracted from the NACK message and used to co-phase retransmitted data packets. The outage probability of the cooperative retransmission scheme is analyzed for the case of perfect synchronization and when the offsets are estimated. To reduce the impact of the residual phase and frequency offsets in cooperating signals, a low-rate feedback scheme is also investigated. It is shown that improved outage probability and reduced packet error rate (PER) performance can be achieved even for long data packets. The proposed cooperative retransmission scheme is found to outperform simple retransmission by the source as well as decode-and-forward cooperation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.1
• /
• pp.58-67
• /
• 2013

In this paper, a mobile relay station(MRS) for vehicles with a beamforming antenna is considered to increase the reliability of a transmission link, especially for the MRS at cell boundary. Cell searching and direction-of-arrival(DoA) estimation methods for an MRS with a uniform linear array(ULA) are proposed for a multipath environment in OFDM-based cellular systems. Performances of the proposed methods(Method1 and Method2) are evaluated by computer simulation with the standard profile of IEEE 802.16e.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.6A
• /
• pp.488-496
• /
• 2012

In this paper, the scheme for designing optimal beamforming matrix for interference control is proposed. The optimal beamforming matrix is found though linear combination of interference alignment conditions and renewal of linear combination coefficient. The proposed scheme has advantages that the complexity is reduced and there is no multiplying operation in matrix calculations even if proposed scheme has the form similar to that of existing least square based scheme. The simulation results show that proposed scheme has about 4bps/Hz higher gain than existing least square scheme. Also there is no additional multiplying calculation and increase of matrix size when the number of transmit and receive antennas is increased.

• Journal of Satellite, Information and Communications
• /
• v.9 no.4
• /
• pp.20-25
• /
• 2014

In this paper, we provide efficient spectrum sensing technology for smooth use of frequency and energy charge of multi-copter. The proposed structures focus on improving performance of spectrum sensing that is based on Ad-hoc network. First, we explain basic principles and disadvantages of cooperative spectrum sensing and ad-hoc based spectrum sensing. To solve these problems, in this paper, we employ the beamforming technology that guarantees higher transmit primary users' signal power to secondary users in ad-hoc network. The performance of proposed algorithm is analyzed in terms of detection probabilities, and the results of this paper can be applied to the various ad-hoc based Cognitive Radio system.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.3
• /
• pp.261-270
• /
• 2010

This paper presents an analytical investigation for a baseline-free imaging of a defect in plate-like structures using the time-reversal of Lamb waves. We first consider the flexural wave (A0 mode) propagation in a plate containing a defect, and reception and time reversal process of the output signal at the receiver. The received output signal is then composed of two parts: a directly propagated wave and a scattered wave from the defect. The time reversal of these waves recovers the original input signal, and produces two additional side bands that contain the time-of-flight information on the defect location. One of the side band signals is then extracted as a pure defect signal. A defect localization image is then constructed from a beamforming technique based on the time-frequency analysis of the side band signal for each transducer pair in a network of sensors. The simulation results show that the proposed scheme enables the accurate, baseline-free detection of a defect, so that experimental studies are needed to verify the proposed method and to be applied to real structure.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.6
• /
• pp.443-450
• /
• 2018

A receiving array system can be applied for tonal noise analysis of underwater vehicles, but it is difficult to install and operate, and a lot of cost is required. In order to overcome this problem, this paper proposes a method to measure the tonal noise of underwater vehicle after synthesizing a virtual array using single receiver. The proposed method compensates the Doppler frequency and time delay caused by the movement of the underwater sound source and applies the focused beamforming technique. The performance of the proposed method was analyzed via simulation.