• 제목/요약/키워드: beamforming technique

검색결과 183건 처리시간 0.02초

Hybrid Diversity-Beamforming Technique for Outage Probability Minimization in Spatially Correlated Channels

  • Kwon, Ho-Joong;Lee, Byeong-Gi
    • Journal of Communications and Networks
    • /
    • 제9권3호
    • /
    • pp.274-281
    • /
    • 2007
  • In this paper, we present a hybrid multi-antenna technique that can minimize the outage probability by combining the diversity and beamforming techniques. The hybrid technique clusters the transmission antennas into multiple groups and exploit diversity among different groups and beamforming within each group. We analyze the performance of the resulting hybrid technique for an arbitrary correlation among the transmission antennas. Through the performance analysis, we derive a closed-form expression of the outage probability for the hybrid technique. This enables to optimize the antenna grouping for the given spatial correlation. We show through numerical results that the hybrid technique can balance the trade-offs between diversity and beamforming according to the spatial correlation and that the optimally designed hybrid technique yields a much lower outage probability than the diversity or beamforming technique does in partially correlated fading channels.

Performance Analysis of Coordinated Random Beamforming Technique in Multi-cell Environments

  • Lee, Jong-Min;Jung, Bang-Chul
    • Journal of information and communication convergence engineering
    • /
    • 제8권4호
    • /
    • pp.393-398
    • /
    • 2010
  • For multi-cell environments, coordinated random beamforming technique in multiuser MIMO(multiple-input multiple-output) broadcast channel is considered. In order to mitigate severe interference at receivers, the multi-cell environments might require complex transmitter and receiver design because the scheduler decision based on full channel state information (CSI) in one cell must be intertwined with decision made by other cells' CSI. With limited CSI, however, this paper considers a scheme of randomizing transmitters' beamforming but being coordinated with other cell transmitters. The transmitters in each cell share random beamforming patterns and schedule data transmission within coherent scheduling period. The corandomized beams allow the users to be selected with the highest SINRs even in multi-cell environments. We analyze the performance of the proposed scheme. And numerical results show that the scheme achieves better performance than the conventional random beamforming when applying to multi-cell environments.

다중경로 페이딩 환경에서 와이브로 스마트 안테나 시스템의 적응 빔포밍 기술 연구 (AN ADAPTIVE BEAMFORMING TECHNIQUE FOR WiBro SMART ANTENNA SYSTEM IN MULTIPATH FADING CHANNEL)

  • 조용진;오태열;정재호;최승원
    • 한국정보통신설비학회:학술대회논문집
    • /
    • 한국정보통신설비학회 2008년도 정보통신설비 학술대회
    • /
    • pp.384-388
    • /
    • 2008
  • Multiple antenna technology, such as multiple input multiple output (MIMO), beamforming is one of the most promising technology for broadband wireless communication. In OFDM environment, we found that as the number of paths is increased, smart antenna system cannot fully exploit beamforming gain. In this paper, we propose a beamforming scheme and analyze the performance of the proposed beamforming scheme in WiBro smart antenna system. WiBro is an OFDMA-based multiple access service for wireless broadband multimedia environment. The proposed beamforming technique for WiBro smart antenna system can effectively improve the performance of the systems in multipath fading environment.

  • PDF

MIMO-OFDM 시스템에서 이중계층 빔포밍 기법의 성능분석 (Performance Analysis of Dual-layer Beamforming Technique for MIMO-OFDM System)

  • 이신;김영주;박노윤
    • 대한전자공학회논문지TC
    • /
    • 제47권5호
    • /
    • pp.18-24
    • /
    • 2010
  • 본 논문에서는 MIMO-OFDM 시스템에서 이중계층 (dual layer) 빕포밍 (beamforming) 기법을 제안한다. 이중계층 빔포밍 기법은 두 개 이상의 송신 및 수신 안테나를 이용하는 공간 다중화 (spatial multiplexing)에서 두 개의 스트림 (stream)을 이용하여 전송 용량을 증대시키는 기술이며, 빔포밍은 어레이 안테나에서 수신 신호의 방향을 추정하여 수신 및 송신에서 어레이 이득을 얻는 기술이다. 제안되는 기법은 MIMO-OFDM 구조에서 공간 다중화 기술을 적용해 높은 채널용량이득을 얻고, 동시에 어레이 안테나를 이용한 이득을 얻을 수 있으므로 기존에 OFDM 시스템에 공간다중화만 적용하거나, 어레이 안테나만 적용한 것에 비해, 시스템 성능을 획기적으로 높일 수가 있다.

빔형성방법을 이용한 흡음계수 측정법 (Measurement of absorption coefficient using beamforming method)

  • Ju, Hyung-Jun;Kang, Yeon-June
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2002년도 추계학술대회논문초록집
    • /
    • pp.370.1-370
    • /
    • 2002
  • A method using beamforming has been developed to measure absorption coefncient of oblique incidence. MUSIC(Multiple Signal Classification) method detects the angle of incidence and reflection. And beamforming method separates the incident and reflected wave. And spatial smoothing technique is used to reduce the coherence between the incident and reflected wave. The test material were modeled as a locally reacting surface. Numerical and experiment results are performed to verify the performance of proposed method.

  • PDF

실험 기반 무격자 압축 빔형성 성능 분석 (Analysis on performance of grid-free compressive beamforming based on experiment)

  • 신명인;조영빈;추영민;이근화;홍정표;김성일;홍우영
    • 한국음향학회지
    • /
    • 제39권3호
    • /
    • pp.179-190
    • /
    • 2020
  • 본 논문에서는 일반 빔형성, 적응 빔형성, 압축센싱을 이용하여 도래각을 추정한다. 이때, 적응 빔형성으로 Minimum Variance Distortionless Response(MVDR)과 Multiple Signal Classification(MUSIC)을 사용하였고, 압축 빔형성(compressive sensing beamforming)을 위해 무격자 압축센싱(grid-free compressive sensing)을 적용하였다. 앞서 언급한 각 기법들의 이론적 배경 및 한계점을 소개하고 모의실험 및 실제 실험을 통해 각 기법의 성능을 비교하였다. 실제 실험은 반사 신호가 존재하는 환경에서 수행하였으며, 2대의 스피커를 통해 음원을 송신하고 8대의 마이크로폰을 사용한 선배열을 통해 데이터를 수신하였다. 모의실험 및 실제 실험 결과를 통해 상관신호가 존재하지 않을 때, 적응 빔형성과 무격자 압축 빔형성이 일반 빔형성보다 고해상도의 결과를 보임을 확인하였다. 반면, 반사 신호가 존재하는 환경에서 적응 빔형성의 성능이 저하되지만, 무격자 압축 빔형성의 경우 반사 신호의 영향을 받지 않고 일반 빔형성의 분해능이 개선됨을 확인하였다.

적응 배열 안테나 빔형성 기법을 이용한 CDMA시스템 성능에 대한 연구 (A Study on the Performance CDMA System Using Adaptive Array Antenna Beamforming Technique)

  • 이관형
    • 한국정보전자통신기술학회논문지
    • /
    • 제5권2호
    • /
    • pp.68-73
    • /
    • 2012
  • 본 논문에서는 이동 무선 채널에서 배열 안테나의 빔형성 기법을 이용하여 CDMA시스템의 성능을 분석한다. 적응 배열 빔형성 안테나 기술은 배열 안테나 소자에서 수신된 신호의 크기와 위상을 결합하고, 가중치를 이용하여 각 소자에서의 도래방향 신호를 증대시키는 공간 필터의 기능을 제공한다. 모의실험을 통해서, 본 논문에서는 CDMA페이딩 환경에서의 간섭 신호를 줄이기 위하여 배열 안테나의 빔형성 기법를 이용하여 양방향 채널에서의 비트오류율을 비교 분석 하였다. 모의실험 결과 배열 안테나시스템을 사용함으로써 공간 다이버시티 효과를 얻을수 있고, MAI의 간섭이 감소하여 성능이 향상됨을 나타내었다.

대형 사력댐에서의 전단파속도 평가를 위한 단측선 빔형성기법 (Short-Array Beamforming Technique for the Investigation of Shear-Wave Velocity at Large Rockfill Dams)

  • 조성호;나디아
    • 대한토목학회논문집
    • /
    • 제33권1호
    • /
    • pp.207-218
    • /
    • 2013
  • 대형 사력댐의 내진성능 평가에서 필히 요구되는 입력상수는 사력재료, 코아매질의 전단파 속도이다. 이를 표면파 시험으로 평가하기 위해서는 사력골재의 불연속, 매질의 비균질, 사면 경계면 등 표면파 시험결과의 신뢰도를 떨어뜨리는 조건을 극복해야 한다. 본 연구에서는 이러한 표면파시험의 한계를 극복하기 위하여 기존 빔형성기법의 원리를 응용한 SBF (Short-Array Beamforming) 기법을 제안하였다. SBF 기법은 3~9 m의 짧은 측선과 원거리 발진원을 이용함으로써, 빔형성기법 고유의 장점인 측정자료의 자동화분석뿐만 아니라 근접장 문제의 해결, 국부적 이상대의 발견 등의 기능을 가지도록 개발되었다. 본 연구에서는 이러한 SBF 기법과 IRF(Impulse-Response Filtration) 기법을 활용하여 대형 사력댐의 전단파속도를 신뢰성 있게 평가하는 방법을 정립하였다. 정립된 기법은 사력댐의 사력재료와 유사한 암버럭으로 매립 성토된 철도 노반에서 다운홀 시험, CapSASW (Common-Array-Profiling SASW) 시험과의 비교를 통하여 그 신뢰성과 실용성을 검증하였다.

Kappa-factor 채널모델에 기반을 둔 최적의 코드북 기반 Opportunistic Beamformer 파라미터 디자인 (Parameter Design for COBF Based on Kappa-factor Channel Model)

  • 강지원;권동승;이충용;황영수
    • 대한전자공학회논문지TC
    • /
    • 제45권12호
    • /
    • pp.20-25
    • /
    • 2008
  • Codebook-based opportunistic beamforming (COBF) 기법은 파일럿을 적게 사용하면서 기존의 opportunistic beamforming 기법에 빔 선택 다이버시티를 추가한다. 본 논문에서는 채널의 상관도를 고려한 kappa-factor 채널 모델에 기반을 두어 COBF 기법에서 사용되는 랜덤 행렬과 코드북을 디자인한다. 디자인한 COBF를 적용하면 최적의 빔과 유사한 빔을 생성할 수 있고, 이에 따라 채널의 상관도가 높거나 낮음에 상관없이 항상 최적의 시스템 용량을 보인다.

A Pseudo-Random Beamforming Technique for Time-Synchronized Mobile Base Stations with GPS Signal

  • Son, Woong;Jung, Bang Chul
    • Journal of Positioning, Navigation, and Timing
    • /
    • 제7권2호
    • /
    • pp.53-59
    • /
    • 2018
  • This paper proposes a pseudo-random beamforming technique for time-synchronized mobile base stations (BSs) for multi-cell downlink networks which have mobility. The base stations equipped with multi-antennas and mobile stations (MSs) are time-synchronized based on global positioning system (GPS) signals and generate a number of transmit beamforming matrix candidates according to the predetermined pseudo-random pattern. In addition, MSs generate receive beamforming vectors that correspond to the beam index number based on the minimum mean square error (MMSE) using transmit beamforming vectors that make up a number of transmit beamforming matrices and wireless channel matrices from BSs estimated via the reference signals (RS). Afterward, values of received signal-to-interference-plus-noise ratio (SINR) with regard to all transmit beamforming vectors are calculated, and the resulting values are then feedbacked to the BS of the same cells along with the beam index number. Each of the BSs calculates each of the sum-rates of the transmit beamforming matrix candidates based on the feedback information and then transmits the calculated results to the BS coordinator. After this, optimum transmit beamforming matrices, which can maximize a sum-rate of the entire cells, are selected at the BS coordinator and informed to the BSs. Finally, data signals are transmitted using them. The simulation results verified that a sum-rate of the entire cells was improved as the number of transmit beamforming matrix candidates increased. It was also found that if the received SINR values and beam index numbers are feedbacked opportunistically from each of the MSs to the BSs, not only nearly the same performance in sum-rate with that of applying existing feedback techniques could be achieved but also an amount of feedback was significantly reduced.