• Progress in Superconductivity
• /
• 제8권2호
• /
• pp.175-180
• /
• 2007

High temperature superconductor $YBa_2Cu_3O_{7-x}$ (YBCO) films have been grown by in-situ electron beam evaporation on artificial metal tapes such as ion-beam assisted deposition (IBAD) and rolling assisted biaxially textured substrates (RABiTS). Deposition rate of the YBCO films is $10{\sim}100{\AA}/sec$. X-ray diffraction shows that the films are grown epitaxially but have inter-diffusion phases, like as $BaZrO_3\;or\;BaCeO_3$, at their interfaces between YBCO and yttrium-stabilized zirconia (YSZ) or $CeO_2$, respectively. Secondary ion mass spectroscopy depth profile of the films confirms diffused region between YBCO and the buffer layers, indicating that the growth temperature ($850{\sim}900^{\circ}C$) is high enough to cause diffusion of Zr and Ba. The films on both the substrates show four-fold symmetry of in-plane alignment but their width in the -scan is around $12{\sim}15^{\circ}$. Transmission electron microscopy shows an interesting interface layer of epitaxial CuO between YBCO and YSZ, of which growth origin may be related to liquid flukes of Ba-Cu-O. Resistivity vs temperature curves of the films on both substrates were measured. Resistivity at room temperature is between 300 and 500 cm, the extrapolated value of resistivity at 0 K is nearly zero, and superconducting transition temperature is $85{\sim}90K$. However, critical current density of the films is very low, ${\sim}10^3A/cm^2$. Cracking of the grains and high-growth-temperature induced reaction between YBCO and buffer layers are possible reasons for this low critical current density.

• 한국육종학회지
• /
• 제40권1호
• /
• pp.15-21
• /
• 2008

It was previously pointed out that mutation is the ultimate source of variation. Adequate variation is needed for plant breeding if there is a limitation in natural genetic resources. When the ionizing radiation has been known to cause chromosomal and genomic alternations, it is widely used for inducing mutagenesis. The electron beam as an ionizing radiation is the principal physical mutagens that induces mutation and effectively used in plant breeding. Since dose-response relationships of electron beam in plant species are rarely known, we investigated the seed germination rate and early seedling growth of irradiated seeds of creeping bentgrass (Agrostis palustris Huds., cv Penn-A1) with various electron beam irradiating conditions (1, 1.3, 2 MeV at both 0.03 mA and 0.06 mA with dose of 100 Gy (Gray) and 0.03, 1, 1.3, 2 MeV at 0.03 mA with dose of 200 Gy, respectively) using electron accelerator at Korea Atomic Energy Research Institute. The growth parameters in terms of shoot length, primary root length, and secondary root length showed similar response between 0.06 / 1 (mA / MeV) at 100 Gy and 0.03 / 0.3 (mA / MeV) at 200 Gy. Bentgrass seed germination was mainly affected by the intensity of irradiated dose (Gray). Germination rate was lowered as the irradiated dose increased. On the other hand, early seedling growth was mainly governed not by the dose of radiation but by voltage.

• 한국재료학회지
• /
• 제9권1호
• /
• pp.25-29
• /
• 1999

We have developed a laser molecular beam epitaxy system for the layer-by-layer growth of oxide thin films. Using this system, we could grow and control oxide thin films of LaAlO$_3$in a molecular layer epitaxy mode on the atomically flat SrTiO$_3$ substrate with a LaAlO$_3$single crystal target. Very clear RHEED oscillations were observed during to growth of a LaAlO$_3$ film for a long period under the optimized conditions of substrate temperature at $650^{\circ}C$, oxygen pressure at 1$\times$10\ulcorner torr, and an incident laser fluence of 4.6J/$\textrm{cm}^2$. The height of mono-layer-LaAlO$_3$ film grown during one period of RHEED intensity oscillation was 3.8$\AA$.

• 한국전기전자재료학회논문지
• /
• 제19권11호
• /
• pp.1005-1009
• /
• 2006

High quality three-dimensional (3D) heterostructures were constructed by selective area (SA) molecular beam epitaxy (MBE) using a specially patterned GaAs (001) substrate to improve the efficiency of tarrier transport. MBE growth parameters such as substrate temperature, V/III ratio, growth ratio, group V sources (As2, As4) were varied to calibrate the selective area growth conditions and the 3D GaAs-AlGaAs heterostructures were fabricated into the ridge type and the V-groove type. Scanning micro-photoluminescence $({\mu}-PL)$ measurements and the following analysis revealed that the gradually (adiabatically) coupled 1D-2DEG (electron gas) field effect transistor (FET) system was successfully realized. These 3D-heterostructures are expected to be useful for the realization of high-performance mesoscopic electronic devices and circuits since it makes it possible to form direct ohmic contact onto the (quasi) 1D electron channel.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1994년도 추계 학술발표 강연 및 논문 개요집
• /
• pp.24-24
• /
• 1994

• Journal of Advanced Marine Engineering and Technology
• /
• 제29권3호
• /
• pp.313-318
• /
• 2005

Li-doped ZnS layers were grown by molecular beam epitaxy. It was found that relatively low growth temperature is suitable for effective incorporation of Li acceptors. The layers grown under optimized conditions exhibited photoluminescence spectra dominated by neutral-acceptor-bound excitons. Such layers also showed electrically p-type behavior in capacitance-voltage characteristics. The net acceptor concentration is estimated to be approximately $3{\times}10^{15}\;cm^{-3}$.

• 한국결정성장학회지
• /
• 제17권2호
• /
• pp.52-56
• /
• 2007

본 연구에서는 초고진공(UHV, ultra high vacuum) 분자선 에피성장(MBE, molecular beam epitaxy) 시스템을 제작하여, ZnSe/GaAs[001]을 증착하였고, 증착된 박막의 특성을 SEM(scanning electron microscopy), AFM(atomic force microscopy)으로 조사하여, 분자층 단위의 조밀하고 균일한 표면특성을 보이고 있음을 확인할 수 있었다 XRD(x-ray diffractometer)를 이용하여, GaAs[001]기판의 XRD peak 위치와 ZnSe 박막의 XRD peak 위치가 각자 일치함을 확인할 수 있었다. PL(photoluminescence)로는 대략 437nm에서 발광하는 것이 관측되었으며, 2인치 ZnSe 박막의 PL mapping을 측정하였다.

• 한국진공학회지
• /
• 제18권6호
• /
• pp.474-480
• /
• 2009

분자선 에피택시 (molecular beam epitaxy: MBE)를 이용하여 GaAs (100) 기판에 Indium interruption growth법으로 성장한 InAs 양자점 (quantum dots: QDs)의 광학적 특성을 photoluminescence (PL)와 time-resolved PL (TRPL) 실험을 이용하여 분석하였다. In interruption growth법은 InAs 양자점 성장 동안 As 공급은 계속 유지하면서 셔터 (shutter)를 이용해 서 In 공급을 조절하는 방법이다. 본 연구에서는 In을 1초 동안 공급하고 셔터를 0초, 9초, 19초, 29초, 또는 39초 동안 닫아 In 공급을 차단하였으며, 공급과 차단 과정을 각 30회 반복하여 양자점을 성장하였다. In interruption 시간을 0초에서 19초까지 증가하였을 때 PL 피크는 1096 nm에서 1198 nm로 적색편이 (~100 nm)하고 PL 세기는 증가하였으나, 19초에서 39초까지 증가하였을 때 PL 스펙트럼의 변화는 없고 PL 세기는 감소하였다. 모든 양자점의 PL 소멸시간 (decay time)은 약 1 ns로 바닥상태 (ground state) PL 피크에서 가장 길게 나타났다. In interruption 시간이 19초인 시료가 가장 좋은 PL 특성과 가장 짧은 운반자 소멸시간을 나타내었다. PL 특성의 향상은 In interruption 시간동안 일정한 양의 In 원자들의 분리와 이동이 증가한 것으로 설명될 수 있다. 이러한 결과로부터 In interruption 법을 이용하여 InAs 양자점의 크기, 균일도, 조밀도 등을 조절하여 원하는 파장대의 양자점을 성장할 수 있음을 알 수 있다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.115-115
• /
• 2009

Epitaxial ZnO film was grown on Si(111) substrate with oxidazed CrN buffer by plasma-assisted molecular beam epitaxy (PAMBE). The growth and structural properties are investigated. The single crystalline growth was revealed by in-situ RHEED analysis. Crystalline quality of ZnO film grown on oxidized CrN buffer was investigated by the X-ray rocking curves. The FWHMs of (0002) XRCs was $1.379^{\circ}$. This value was smaller than the ZnO film grown directly on (111) Si substrate.

• Journal of Electrical Engineering and information Science
• /
• 제3권1호
• /
• pp.110-116
• /
• 1998

A single-crystalline epitaxial film of GaAs has been grown on Si using a gs assisted-ionized vapour beam eptaxial technique. The native oxide layer on the silicon substrate was removed at 550$^{\circ}C$ by use of an accelerated arsenic ion beam, instead of a high-temperature desorption. During the growth the substrate temperature was maintained at 550$^{\circ}C$. Transmission electron microscopy and electron diffraction data suggest that the GaAs layer is an epitaxially grown single-crystalline layer. The possibility of growing device quality GaAs on Si is able demonstrated through fabrication of GaAs MODFET on Si substrates.