• 한국환경보건학회지
• /
• 제27권1호
• /
• pp.83-87
• /
• 2001

In this study, the characteristics of lead removal by PVA and alginate bead which used widely as immobilizing agents were investigated, and the difference of removal amounts between pure PVA/alginate bead and Sargassum thunbergii immobilized bead was studied. All PVA beads, pure and S. thunbergii immobilized, reached an equilibrium state in about 1 hour, and S. thunbergii immobilized bead adsorbed more lead than pure one. But in the case of alginate beads, they needed much time, about 5 hours, to reach an equilibrium state, and adsorbed lead four times higher than PVA beads. Therefore, it was considered that alginate beads had more mass transfer resistance and function groups which adsorb lead such as hydroxyl, carboxyl and etc. than PVA bead. To examine the continuous usage of alginate beads, the process of adsorption/desorption of lead was conducted repeatedly. As the process proceeded, the amounts of lead adsorption decrease, so it was indicated that the non-desorbed lead from alginate bead at first adsorption/desorption process remained constantly.

• 한국해양공학회지
• /
• 제15권2호
• /
• pp.72-78
• /
• 2001

The bead is used to provide properly restraining force in the sheet metal forming process. This bead process includes bending and geometrical non-linearity, and affects the state of binderwrap. Therefore, the analysis of bead process is very important to obtain the desired formability. In this paper, the research about the influence of the punch stroke of bead on the draw-bead process was conducted. Results from the analysis will give useful information to the effective tool design of blank forming process. To analyze the bead process, and elasto-plastic finite element formulation is constructed from the equilibrium equation and the considered boundary conditions involved a proper contact condition. The static-explicit finite element method as a numerical method for the analysis was applied to the analysis program code. It was found that this method could solve too much computation time and convergence problem owing to high non-linearity of bead forming process.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.672-678
• /
• 1993

The bead shape in high frequency electric resistance (HER) pipe welding gives important information ons judging current welding state. In most manufacturing process, the heat input is controlled by skilled operators observing color and bead shape. We proposed the bead shape monitoring system in HERW pipe process by using structured light beam. We reconstructs 3-D shape of bead from the measured data, and compare this shape with real 3-D shape obtained by coordinate-measuring machine. This experiment results show that the proposed system can monitor the bead shape with good accuracy.

• KSBB Journal
• /
• 제11권1호
• /
• pp.77-85
• /
• 1996

에탄올 생산 효모균주인 Saccharomyces K35의 에탄올 생산을 위한 최적의 초기 pH는 5.0으로 나 타났으며, 기질로 200g/$\ell$ 의 glucose를 이 용했을때 약 80%의 수율을 나타내어 내당성도 좋은 것으로 나타났다. 첨가제와 가교제로서 Celite R-634 1.67 %(v/v) 와 glutaraldehyde 1.67% (v/v) 를 함께 첨가했을때(ACG bead) Ca-alginate bead에 비해 안정성, 에탄올 생산성 빛 세포생존률이 좋게 나타 났다. 또한 배지밖에서 자란 효모 농도도 감소하여 A A CG bead가 Ca-alginate bead보다 phosphate이 온에 더 안정한 것으로 보인다. SEM (Scanning E Electron Microscopy)을 통해 ACG gel bead의 구조를 관찰하였는데 , ACG bead가 Ca~alginate bead에 비해 훨씬 온전한 모습을 유지하며, 효모의 농도가 상당히 밀집되어 있음을 보여준다. 반복회분 식 배양을 시도했을때 Ca-alginate bead의 경우는 7회분(약 40일)까지는 에탄올 놓도와 효모농도가 각각 138g/$\ell$-gel와 29~30g/$\ell$-gel을 유지하다가 급격히 감소하는 경향을 보였으나, ACG bead의 경 우에는 130~150g/$\ell$-gel와 32~35g/$\ell$-gel의 수준을 유지하였으며, 세포생존률도 약 70% 이상을 유지하였다.

• 한국정밀공학회지
• /
• 제28권1호
• /
• pp.96-101
• /
• 2011

Under extreme test or operation condition, refrigerator endures complicated stresses state and thermal bowing deformation arises on the sidewall. Shelf rails designed in the inner case provide increased surface area to permit expansion without bowing, and also increase structural rigidity to resist bowing. In this study, we designed six different shelf patterns of refrigerator model and studied the bead on refrigerator deformation using finite element method (FEM). Analysis result shows that increasing the numbers of beads properly in refrigerator is more helpful to reduce thermal bowing deformation. In addition, the beads would decrease stress on refrigerator sidewall. However, vertical beads have no effect to reduce thermal deformation of the bowing.

• 폴리머
• /
• 제29권5호
• /
• pp.445-450
• /
• 2005

인체 보형물의 생체 재료로 사용할 목적으로 히아루론산 비드를 제조하였다. 히아루론산 수용액과 콩기름을 섞어서 얻어진 현탁상태에서 히아루론산을 1,3-butadiene diepoxide로 가교시켰다. 제조된 비드의 물성을 살펴보기 위해 직경, 표면적과 팽윤도를 측정하였고 전자현미경으로 표면상태를 관찰하였다. 가교제의 농도가 $5-12\;vol\%$ 범위에서 비드가 형성되었으며 제조된 비드는 단순분산성을 보였다. 히아루론산 농도 혹은 가교제 농도가 증가할수록, 가교 온도가 감소할수록, BET표면적과 팽윤도가 감소하였다. 혼합속도의 변화에 의해 비드의 물성은 거의 변하지 않았으나 비드의 크기는 효과적으로 조절되었다.

• Journal of Welding and Joining
• /
• 제29권1호
• /
• pp.107-114
• /
• 2011

CP steel was developed to reduce the weight and increase the strength of car body. When it was welded using state-of-the-art disk laser welding, the effected of boron on the microstructure and hardness were investigated. Welding power was fixed at 3.5kW and welding speeds were 4,8 and 12m/min. Full penetration occurred in welding speed of 12m/min and weld bead was almost unchanged with boron contents. But the welding speed increased, the upper and lower bead were narrowed. In a welding speed of more than 8m/min, underfill defects were formed on the bead bottom. The hardness of weld zone was somewhat fluctuation in fusion zone and HAZ showed the highest hardness values. The hardness of each region showed little change with the boron contents, and softening phenomenon occurred in the HAZ near the base metal regardless of the boron contents.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 1999년도 춘계학술발표논문집
• /
• pp.1-6
• /
• 1999

A study was made to determine the effect of plastic pigment on the coating structure and printability of coated paper. Three basic plastic pigments were investigated such as solid-bead type of plastic pigment, binder type of plastic pigment and hollow type of plastic pigment. In the systems investigated, it was observed that particle shape and structure of plastic pigment had influenced on the rheology of coating color, the state of packing, and the properties of coated paper. The materials investigated were restricted to plastic pigments commonly uesd in paper coating formualtion. Inorganic pigments used in this research were kaolin clay which is platelets and calcium carbonate which is rhombic. Three kinds of plastic pigments were blended in the color made up with two inorganic pigments, respectively. The combination of pigments were carried out (1) to determined the effect of paticle structure of plastic pigment on the state of dispersion of coating color, (2) to observe the effect of temperature of calender on the property of coated paper prepared with plastic pigment. The data indicated that binder and hollow type of plastic pigment had the best results on improving the properties of coated paper such as paper gloss, opacity and air permeability ect. and solid-bead type of plastic pigment in the next place.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제6권1호
• /
• pp.42-50
• /
• 2001

The activity of immobilized cell-support particle aggregates is influenced by physical and biochemical elements, mass transfer, and physiology. Accordingly, the mathematical model discussed in this study is capable of predicting the steady state and transient concentration profiles of the cell mass and substrate, plus the effects of the substrate and product inhibition in an immobilized cell-support aggregate. The overall mathematical model is comprised of material balance equations for the cell mass, major carbon source, dissolved oxygen, and non-biomass products in a bulk suspension along with a single particle model. A smaller bead size and higher substrate concentration at the surface of the particle, resulted in a higher supply of the substrate into the aggregate and consequently a higher biocatalyst activity.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 춘계학술대회 논문집
• /
• pp.269-274
• /
• 1999

Aluminum alloy has not only physical characteristic of very high activated high thermal conductivity and high thermal coefficient expansion but also special characteristic of great difference fusibility of hydrogen between liquid and solid phase. Because of these reasons, Aluminum welding is very different. Therefore, only MIG welding method should be applied instead of other welding methods. In this study, in order to select optimal welding conditions, it has been to investigate the effectiveness on the welding current, welding speed, flow rate of gas and welding voltage to occurrence of spatters, external shape of bead, state of penetration and width and hight of bead by using filer metal of A15356(dia. 1.21mm) on the base material of A16061.