• Bulletin of the Korean Chemical Society
• /
• v.10 no.6
• /
• pp.595-599
• /
• 1989

The effects of phosphatidic acid(PA) on the activity of phospholipase D were examined in detail. The enzyme activity was examined in the liposome system containing phosphatidylcholine and PA, which was suspended in a desired buffer solution by ultrasonication. The substrate of large unilamella vesicle (LUV) state by ultrasonication was more effective on the enzyme activity than that of multilamella vesicle(MLV) by water-bath type sonication. The most effective molar ratio of PC-PA liposome for enzyme activity was found to be 1:0.7. The other optimum conditions were found 5 mM $Ca^{2+}$ ion, pH 6.6, and incubation temperature of $27^{\circ}C. K_m \;and \;V_{max}$ values were estimated to be 1.43 mM and 0.8 $nmole/min/{\mu}g$ protein respectively. These properties in a PC-PA liposome system were compared with those in a PC-SDS mixed micelle system. The effects of other phospholipids and organic phosphates on the enzyme activity were also examined.

• Korean Chemical Engineering Research
• /
• v.57 no.2
• /
• pp.283-288
• /
• 2019

Catalytic removal of sulfur compounds from heavy naphtha (HN) was investigated using a combination of an oxidation process using hydrogen peroxide and an adsorption process using granulated activated carbon (GAC) and white eggshell (WES). This study investigated the impact of changing several operating parameters on the desulfurization efficiency. Specifically, the volume ratio of $H_2O_2$ to HN (0.01~0.05), agitation speed ($U_{speed}$) of the water bath shaker ($100-500{\pm}1rpm$), pH of sulfur solution (1~5), amount of adsorbent (0.1~2.5 g), desulfurization temperature ($25{\sim}85{\pm}1^{\circ}C$) and contact time (10~180 minutes) were examined. The results indicate that the desulfurization efficiency resulting from catalytic and adsorption processes of GAC is better than that of WES for oxidation and removing sulfur compounds from HN due to its high surface area. The desulfurization efficiency depends strongly on all investigated operating parameters. The maximum removal efficiency of GAC and WES achieved by this study was 86 and 65, respectively.

• Corrosion Science and Technology
• /
• v.21 no.1
• /
• pp.41-52
• /
• 2022

Herein, we report polyvinyl butyral composites coatings containing various loadings of 72-h bath sonicated hexagonal boron nitride particles (5 ㎛) to enhance barrier properties of coatings. Barrier properties of coatings were determined in 3.5 wt% NaCl after different time periods of immersion via electrochemical techniques such as open circuit potential, electrochemical impedance spectroscopy, and potentiodynamic polarization test. Coatings containing sonicated hexagonal boron particles exhibited improved corrosion resistance for longer periods of immersion compared to neat coating. We also discussed effects of hexagonal boron nitride on healing properties of polyvinyl butyral. Coatings containing 1.0 wt% loading of sonicated hexagonal boron nitride showed improved long-term barrier properties than coatings with other compositions. The presence of hexagonal boron nitride also affected the healing properties of polyvinyl butyral coatings besides their barrier properties. Such improved barrier properties of composites coatings were attributed to the high aspect ratio, plate-like shape, and electrically insulated nature of the filler.

• Journal of Korean Society for Atmospheric Environment
• /
• v.2 no.3
• /
• pp.27-33
• /
• 1986

Atmospheric particulate matter (A. P. M.) was collected and size-fractionated by an Andersen high-volume air sampler over 15 month period from Jan. 1985 to Feb. 1986 in Seoul. The concentration of chloride, nitrate and sulfate were extracted in an ultrasonic bath and were analyzed by ion chromatography. The annual arithmetical mean of A. P. M. was 128.54 $\mug/m^3$. The concentration of anions were 2.88 $\mug/m^3$ for chloride, 3.86$\mug/m^3$ for nitrate, and 25.44$\mug/m^3$ for sulfate. The content of A. P. M. was lowest in the particle size range 1.1 $\sim 3.3\mum$ and increased as the particle size increased or decreased. And the anions exhibited a seasonal variation in the isize distribution. The contents of anions were higher in winter than summer. Ther ratio of fine particles to the total particles defined by F/T for chloride, nitrate and sulfate. The F\ulcornerT of these anion generally decrease with increasing air temperature. This tendency was prevalent in the chloride and nitrate.

• 한국태양에너지학회:학술대회논문집
• /
• 2012.03a
• /
• pp.96-101
• /
• 2012

An experimental study was conducted to investigate the performance of a concentrating photovoltaic cell (CPV) against temperature. It is know that a high efficiency of a CPV can be achieved only with proper cell temperature as well as high concentration ratio (CR). This study is concerned with appropriate cooling condition for a liquid-convection cooler for the best performance of a specific CPV. A series of experiments was conducted in a range of cell temperatures as a result of varying cooling conditions, while the concentration ratio was 390 and the solar irradiation flux was higher than 900 $W/m^2$ in outdoor environment. The CPV had a planar dimension of 10 by 10 mm. A Fresnel lens was used as a concentrator, of which the dimension was 221 mm(W) ${\times}$ 221 mm(L) ${\times}$ 3 mm(t) and the transmissivity was known to be 0.8. The cooler was attached to the bottom side of the CPV and had a contact area of 21 mm(W) ${\times}$ 26 mm(L), which was identical to the size of the base plate of the CPV. The coolant temperature was controlled by an isothermal bath and the flow rate was controlled and measured by a flowmeter. The experimental results showed that the average of power efficiency of the CPV decreased from 28.6 % to 24.7 % as the cell temperature increased from $36^{\circ}C$ to $97^{\circ}C$. An appropriate cooling method of a CPV might increase the power conversion efficiency by about 4% for the same concentration ratio. Discussion is included from the viewpoint of the combined efficiency in addition to the power efficiency.

• Journal of Sericultural and Entomological Science
• /
• v.47 no.1
• /
• pp.36-40
• /
• 2005

This studies were carried out to develop the new silk degumming method by elelectrolyzed alkaline water on the silk degumming process. Using to this method, it could be collect pure sericin from the degumming water, because the degumming water by elelectrolyzed alkaline water was not contaminated by chemicals including soap. The range of elelectrolyzed alkaline water was pH 11.5 to 11.7 and maintained the first value for 8 days under the cool and closed conditions. The degumming ratio of silk was higher in elelectrolyzed alkaline water(pH 11.5~11.7)than that of soap and alkaline bath. When the pH value of elelectrolyzed alkaline water was adjusted at pH 11.0, the degumming ratio of silk was similar to that of soap and alkaline degumming. After degumming the pH value of degumming water decreased largely in the elelectrolyzed alkaline water compared to that of soap and alkaline bath. The tenacity and elongation of degummed silk by elelectrolyzed alkaline water was almost same those of soap and alkaline degumming for 90 min.

• The Journal of Natural Sciences
• /
• v.8 no.2
• /
• pp.119-127
• /
• 1996

The effect of sodium hydroxide treatment on some physicochemical properties of zeolite mordenite mineral was studied with chemical analyses, powder X-ray diffraction, thermal analyses, infrared analysis, measurement of carbon dioxide adsorption and gas chromatography. Mordenite mineral from tuffaceous rocks in Yeongil and Wolsung area was used as a starting material and treated with 0.1-5N NaOH aqueous solution at about $95^{\circ}C$ in the water bath for three hours.At the concentration of sodium hydroxide below 0.5N, all chemical compositions in the tuff were virtually insoluble and the mordenite structure did not change. At the concentration above 1N, the chemical compositions such as silica, alumina, etc., were dissolved. The dissolution ratio of silica was lager than that of alumina, and the ratio of silica to alumina in the tuff decreased sharply in the concentration range of 2 to 3N. Intensity of X-ray diffraction peak of mordenite (202) plane and the adsorbed amount of carbon dioxide also decreased with the increasing concentration of sodium hydroxide above 1N. These decreases corresponded to the degree of mordenite structure collapsed.The separation of gas chromatography of nitrogen, oxygen and carbon monoxide was not affected by the sodium hydroxide treatment, but elution peaks of methane and krypton tended to be broadened and their retention time was shortened. The elution peaks of both methane and krypton tended to be overlapped with those of nitrogen and oxygen.

• The Journal of the Korea Contents Association
• /
• v.19 no.8
• /
• pp.115-122
• /
• 2019

The companion animal related businesses are rapidly growing as the pet population increases in Korea. In this study, we analyzed the market trends of companion animal food and products to offer basic information that can be used in related policies and industries. The data were collected using Nielsen Korea's wholesale/retail distribution channels. As a result, in the case of companion dog food, PB products of domestic companies showed the highest market share with 24.6%, and the ratio of domestic companies(54.8%) was higher than that of import companies(45.2%). Domestic PB products also had the highest market share(16.5%) in companion cat food, however, the ratio of import companies(71.6%) was higher than that of domestic companies(28.4%). In the case of the market share of the companion animal products(toys, oral and bath supplies), Nosework mats from domestic companies were top ranked in the toy category(28.0%). Oral products(62.5%) and bath products(59.5%) from domestic companies were also having a higher market share than import companies. Our research may help domestic companion animal product companies to steadily increase market share and the amount of their export.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.40 no.4
• /
• pp.331-339
• /
• 2014

This study is aimed to provide the primary data about safety of cosmetics products using indirect preference of korean cosmetics customer and numerical comparison of applied area. For this study, we collected 9,879 cosmetics products which were inspected in cosmetics research team from January, 2010 to December, 2012. The domestic cosmetics was 645 cases (6.5%) and Imported cosmetics was 9,234 cases (93.5%). As manufacturing country, the France has 4,342 cases (44.0%) and the next ranking were like those, Germany 1,637 cases (16.6%), U.S.A 1,476 cases (14.9%), Republic of Korea 645 cases (6.5%), Italy 557 cases (5.6%), and etc 1,222 cases (12.4%). By the year, the cases of test cosmetics have decreased from 3,784 cases (2010), 3,394 cases (2011) to 2,701 cases (2012), the relative ratio of common cosmetics part was drop in but the other group (functional cosmetics and hair dye related products) was increased. The largest market share product was Skin care 5,470 cases (55.4%) and the next order was like those, Make up 1,908 cases (19.3%), Hand & Foot 1,026 cases (10.4%), Hair Care 616 cases (6.2%), Bath 361 cases (3.7%), and etc 498 cases (5.0%). In domestic cosmetics, the greatest proportion was Skin care and the others were Hair Care > Makeup > Hand & Foot > Bath, but the proportion was evidently changed in imported cosmetics, Skin care > Makeup > Hand & Foot > Hair Care > Bath. It is necessary to set the priority of the international quality standards to identify trends from domestic consumers directly or indirectly. Compare the ratio of category and human application parts from domestic and imported cosmetics, we utilize leverage as the basis for future-oriented cosmetic safety.

• Textile Coloration and Finishing
• /
• v.20 no.6
• /
• pp.35-41
• /
• 2008

This study investigated the dyeing properties of silk fabrics with Annatto. The dye stuff was extracted by distilled water at $60^{\circ}C$, 10minutes, 1:100 of bath ratio. Dyeability(K/S) and color fastness of silk fabrics were tested under conditions of various concentrations, time, temperature, repeat-numbers of dyeing, pH, mordants variables and methods of mordanting. The highest absorbance was found in methanol extract of Annatto. The optimum dyeing concentration, time and temperature of silk fabrics with Annatto were 25%(o.w.f.), 60min and $60^{\circ}C$ respectively. The K/S value showed higher in post-mordanting than in pre-mordanting, and especially post-Fe mordant showed highest K/S value. In the case of colorfastness, Cu-mordanted fabrics were good washing fastness. Dry cleaning fastness appeared 4-5 grades and light fastness showed lowest grade.