• Journal of Korean Society on Water Environment
• /
• v.30 no.3
• /
• pp.351-360
• /
• 2014

The allocation of margin of safety (MOS) at a uniform rate to all areas of the unit watershed makes it very difficult to keep the load allotment stable in the area for lack of reduction measures like forest land. This study developed an equation to calculate margin of safety differentially according to the regional characteristics. The equation was formulated on the basis of the regional characteristic factors such as a load contribution factor for land use type and a site conversion factor for the unit watershed. The load contribution factor represents a contribution of loads from a particular land use. The site conversion factor was derived from the site conversion ratio of a unit watershed. Margin of safety for the non-point pollution load in the land use sector decreased by 20~25% in three river basins. The margin of safety in the unit watersheds with low site occupation ratios decreased in high rate, while in the unit watersheds with large urban area decreased in low rate. With the application of the differential margin of safety considering regional characteristics, not only the reduction of pollution loads can become lighter but also it can be easier to develop plans for Total Maximum Daily Loads (TMDLs) even where the reduction measures are not available.

• Journal of Korea Foresty Energy
• /
• v.24 no.2
• /
• pp.10-15
• /
• 2005

This study was achieved by purpose to measure carbon emissions by conversion of forest land in Korea to correspond to UNFCCC. The conversion of forest land data extracted in forest basis statistical data during the latest 5 years from 2000 to 2004, and biomass carbon emissions used biomass extension factor by forest types and carbon conversion factor. During the latest 5 years, the forest land of the annual means about 7,200ha was conversed as other expenditure and tree volume of the annual mean about $212,000m^3$ was felled. It was calculated that total biomass carbon emissions by conversion of the forest land emits annual mean 105,000tC during the latest 5 years. Biomass carbon emissions by forest types was calculated that coniferous forest emits 54,000tC and deciduous forest emits 51,000tC. It was calculated that carbon emissions per ha by conversion of the forest land emits annual mean 14.4tC/ha during the latest 5 years. Seeing by forest types, coniferous forest emits 13.3tC/ha and deciduous forest emits 18.5tC/ha. Therefore, it was shown that deciduous forest emits more carbon per unit area than coniferous forest.

• Convergence Security Journal
• /
• v.7 no.3
• /
• pp.79-86
• /
• 2007

B2B e-business is an economic transaction formed between companies through various networks including internet. At present, e-business between companies partly applies information distribution between companies, but many enterprises expect that a corporate basic system will be gradually changed into XML basis if web service is earnestly materialized, so they are competing with each other in developing XML DBMS. Existing XML DBMS studies used XML DTD in order to represent the structure of XML document. Such XML DTD defines the expression of a simple type, so there are many difficulties in defining the structure of XML document. To cope with this, in this paper, the author will develop database schema generator utilizing relational database generally used in storing contents of data, on the basis of XML schema selected as a standard of W3C. Also, to store XML data, the author proposed the automatic conversion method of relational database schema that used XML schema.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.4
• /
• pp.201-209
• /
• 2020

In this study, issues related to changes in base year, which have controversial effects on fees in service contracts, were reviewed. In this regard, sensitivity analysis was conducted on the effects of changes in base year on conversion factor by type. The benefits and disadvantages of each specific type of medical institution were examined. Main conclusions are as follows. First, changing the base year to be closer to the present time had a beneficial effect on the conversion factor of hospitals. Second, changing the base year to be closer to the current point of time had an adverse effect on the conversion factor of pharmacies and clinics and had a significant adverse effect on clinics. Third, assuming that a single conversion factor is collectively applied to all types, a favorable effect occurred in all cases when the base year was changed to be closer to the present time. Base year changes can bring about conflicts of interest between insurer and providers, and within providers. Therefore, changing the base year should be pursued upon mutual agreement on a reasonable basis for resource allocation. In addition, it is necessary to provide incentives for temporary compensation for the types of losses incurred.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.2
• /
• pp.251-256
• /
• 2010

This paper aims for developing the intelligent robot emulating human synesthetic skills which associate a color image with sound, so that we are able to build an application system based on the principle of mutual conversion between color image and sound. As the first step, in this study, we have tried to realize a basic system using the color image to sound conversion. This study describes a new conversion method to convert color image into sound, based on the likelihood in the physical frequency information between light and sound. In addition, we present the method of converting color image into sound using color model conversion as well as histograms in the converted color model. In the basis of the method proposed in this study, we built a basic system using Microsoft Visual C++(ver. 6.0). The simulation results revealed that the hue, saturation and intensity elements of a input color image were converted into F0, harmonic and octave elements of a sound, respectively. The converted sound elements were synthesized to generate a sound source with WAV file format using Csound toolkit.

• Journal of environmental and Sanitary engineering
• /
• v.14 no.3
• /
• pp.130-138
• /
• 1999

The feasibility of municipal sewage sludge digestion was investigated by using thermophilic anaerobic sequencing batch reactor(ASBR). One-day settle time was enough for the high performance of solid-liquid separation. The conversion of semi-continuous mode to sequencing batch mode is easily achieved without any adverse effects, although the large amount of sludge equal to the volume ratio of 0.3~06 to reactor volume was added in the feed step of the start-up. The ASBRs had higher conversion capability of organics to biogas than the control reactor. Gas yields of the ASBRs were increased by the average of 50% over the control reactor across a range of hydraulic retention time(HRT)s from 10days to 5days. The thermophilic reactors showed higher gas production than mesophilic reactor. Removal efficiencies of organic matter exceeded 80% on the basis of supernatants, except that at the reactor. Solid-liquid separation was essential in the performance of the ASBR, especially, at the lower HFT. The ASBRs were highly efficient in the retention of activated biomass within the reactor. thus compensating for increased equivalent organic loading rate through increased solids retention times followed by the increased solids, while maintaining shorter HRTs.

• 한국생물공학회:학술대회논문집
• /
• 2000.04a
• /
• pp.259-262
• /
• 2000

The production of pullulan by Aureobasidium pullulans HP-2001 was investigated under various ratios of glucose as carbon source and yeast extract as the nitrogen source, Highest conversion rate (productivity) of glucose to pullulan was 40.0% when concentrations of glucose and yeast extract were 5% and 0.15%, respectively. Maximal production of pullulan was 29.3g/1 when the concentration of glucose was 8%(w/v) and that of yeast extract was 40:1. On basis of the result that production of pullulan was found in a medium which concentration of glucose as carbon source was up to 20%(w/v), Aureobasidium pullulans HP-2001 seemed to overcome the catabolite repression. Conversion rate of pullulan from 20%(w/v) of glucose was 11.1%.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.683-686
• /
• 2001

This paper presents a novel prototype of the utility­interactive voltage source type sinewave pulse modulated power inverter using a high-frequency flyback transformer link. The proposed power conditioner circuit for the solar photovoltaic generation and small scale fuel cell has an isolation function due to the safety of the power processing system, which is more cost effective and acceptable for the small-scale distributed renewal energy conditioning and processing systems. The discontinuous current mode(DCM) of this power processing conversion circuit is applied to implement a simple circuit topology and pulse modulated control scheme. Its operation principle is described on the basis of simulation evaluations and theoretical considerations. The simulation results obtained herein prove that the proposed inverter outputs with sinusoidal waveforms and unity power factor currents are synchronized to the main voltage in utility power source grid. In this paper, the soft switching topology of high­frequency linked sinewave pulse modulation inverter is proposed and discussed.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.9
• /
• pp.25-31
• /
• 2007

In this paper, a novel MPPT(Maximum Power Point Tracking) algorithm for power of PV(Photovoltaic) systems is presented using a boost converter for a connected single phase inverter. On the basic principle of power generation for the PV(photovoltaic) module, the model of a PV system is presented. On the basis of this model, simulation of this PV system and algorithms for maximum power point tracking are described by utilizing a boost converter to adjust the output voltage of the PV module. Based on output power of a boost converter, single phase inverter uses predicted current control to control four IGBT#s switch in full bridge. Furthermore, a low cost control system for solar energy conversion using the DSP is developed, based on the boost converter to adjust the output voltage of the PV module. The effectiveness of the proposed inverter system is confirmed experimentally and by means of simulation. Finally, experimental results confirm the superior performance of the proposed method.

• Korean Journal of Agricultural Science
• /
• v.42 no.1
• /
• pp.23-27
• /
• 2015

The study was conducted to determine the effect of corssbred Korean native chickens (CKNC) on growth performance indices for hatch to 28 days. A total of 192 1-day-old birds were divided into one of 4 CKNC groups by 5 Korean native pure strains. Diets used in the study consisted of 2 phases with corn and soybean meal basis as earlier (1~2 weeks; crude protein 18.5%, metabolizable energy 3,000 kcal/kg), and grower (2~4 weeks; crude protein 15.0%, Metabolizable Energy 2,850 kcal/kg). Body weight and feed intake were measured bi-weekly. Crossbred 1G (group of family line) had higher body weight and average daily gain whereas crossbred 5Y had greater average daily feed intake and feed conversion ratio than other crossbred Korean native chicken for hatch to 28 days. The results in the current study indicated that crossbred 1G had higher growth performance indices compared with other crossbred Korean native chicken for hatch to 28 days.