• 한국실내디자인학회논문집
• /
• 제22권4호
• /
• pp.23-32
• /
• 2013

This study represents something in common and differences of organic characteristics between early modern architecture and contemporary architecture analysing F. L. Wright's Robie House and Toyo Ito's Sendai Mediatheque. A natural organic body cannot be separated from the natural environment, and each part of an architecture has each own property and forms a whole at the same time. That is a basic concept of organic architecture, and a framework for analysis is set up based on it. The followings are similarities and differences of organic concept and interpretation between Wright's Robie House and Ito's Sendai Mediatheque First, Wright' Robie house unites with the natural surrounding, using a physically close connection to the ground. In contract, Ito's Mediatheque shows characteristics of noncentural and fluidic space that are metaphorically reflecting tangible and intangible of factors in modern city, where there is an ambiguous physical boundary between architecture and urban environment. Next, floors, walls and ceilings of Wright's housing as for basic building blocks are physically separated and at the same time form formative unity from the point of view of a physical and structural organic body. And continuous flow of faces of separated walls form an organism united with the nature from a physical aspect. On the contrary to this, there is an no-boudary and floating organic architecture of integrated structure from ambiguous setting of relation between architecture and urban space in Ito's architecture. Especially, Mediatheque shows semantic integration of floating urban environmental factors through horizontal and vertical integration of horizontal slabs, vertical pipes, and skins. Last, horizontal and vertical factors of Wright' Housing is appreciated as an basic experienced structure in terms of spacial perception and fluidic inner spaces in Wright's housing is completed with a series of spatial experiences in a visual sense. On the other hand, no-boundary and floating space of Ito's architecture accept user's physical and virtual body. Especially, there is an integration transcending beyond time and space, accepting an imaginary body and events with the course of time at Ito's Mediatheque.

• 대한수학교육학회지:학교수학
• /
• 제13권3호
• /
• pp.423-446
• /
• 2011

학교수학에서 정적분과 치환적분법의 개념은 확률밀도함수의 도입, 연속확률변수의 기댓값, 정규분포의 표준화와 관련하여 수학적 연결성을 가진다. 그러나 개정교육과정의 '미적분과 통계 기본', '적분과 통계' 과목의 교육과정해설서와 검인정 교과서 및 익힘책에서 적분단원과 통계단원 사이의 수학적 연결성 고려가 어려움을 발견하였다. 본 연구는 학교수학에서 확률밀도함수의 도입, 연속확률변수의 기댓값, 정규분포의 표준화에 대하여 적분단원과의 수학적 연결성을 고려한 지도방안 마련을 목적으로 한다. 세개념에 대한 학생대상 실태조사와 개정교육과정의 교육과정해설서, 교과서, 익힘책, 그리고 국내 외 통계학(확률론) 도서(국내 13종, 국외 22종)의 내용을 비교하였다. 이를 바탕으로 세 개념에 대한 지도내용을 개발하여 실제 수업에 적용해보았고, 교육과정개정이나 교과서의 내용구성 변화에 대한 시사점을 발견하여 그 결과를 제언하였다.

• 한국산학기술학회논문지
• /
• 제14권11호
• /
• pp.5890-5896
• /
• 2013

본 연구는 BIM 기반의 납품체계에서 IFC 파일의 공정정보를 축적하고 활용하기 위한 방안을 제시하였다. 이를 위해 첫 번째로, 공정정보의 활용방안에 대하여 기존연구를 분석하였고, IFC 표준을 고찰하였다. 두 번째로, 공정요소를 도출하기 위해 공정계획 수립절차를 분석하였으며, 공정프로세스와 상용소프트웨어를 분석하여 공정정보항목을 도출하였다. 또한 도출된 공정정보항목을 기반으로 IFC 스키마를 분석하여 IFC의 공정요소를 도출하였다. 마지막으로 IFC 납품파일의 축적을 위해 조달청의 시설사업 BIM 적용 기본 지침서를 분석하여 개념적인 BIM 모델의 납품프로세스를 통한 축적방법과 활용방안을 제시하였다. 본 연구는 국가적으로 진행되고 있는 BIM 도입과정에서 BIM모델의 정보를 축적하는데 기여할 것으로 기대된다.

• International Journal of Computer Science & Network Security
• /
• 제21권12호
• /
• pp.356-364
• /
• 2021

In the formation of a socially oriented economy in the context of European integration, the development of tourism is one of the priority areas that positively affects the socio-economic situation of the country as a whole and its regions in particular, stimulates important economic activities and strengthens Ukraine's positive image in Europe and the world. In view of this, in the framework of a thorough study of the tourism industry it is necessary to assess its potential. This study proposes an assessment of tourism potential in the regional context, which consists of consistent implementation of six steps, namely: first, the definition of research objects for which the tourism potential is determined; secondly, the formation of a set of basic features for assessing tourism potential of certain objects; thirdly, the collection of information on individual indicators, which are selected to assess the tourism potential of the objects; fourth, the calculation of parametric indices by comparing the indicators of each individual object of study (region) with the average values in the set of objects under study; fifth, the definition of a generalized index of tourism potential of the region; sixth, grouping regions by the values of the generalized index of tourism potential. Execution of the stated algorithm involves the use of various methods, in particular, statistical, graphical, parametric, the analysis of hierarchies, matrix and cartographic. Approbation of the proposed assessment of tourism potential at the regional level in Ukraine allowed to group regions according to the values of the generalized index of tourism potential, which can be used as a basis for developing measures to increase and enhance their tourism potential in Ukraine in terms of European integration.

• 한국정밀공학회지
• /
• 제13권9호
• /
• pp.114-129
• /
• 1996

This paper describes the whole development phase for the underwater vehicle actuating system with high hydroload torque disturbance. This includes requirement analysis, system modeling, control algorithm design, real time implementation, test and performance evaluations. As for driving control algorithms, fuzzy logic, variable structure and PD(Proportional-Differential) algorithm were designed and implemented on board controller using a single chip microprocessor. Intel 8797. And test and performance evaluation is carried out both single test and wystem integration test. We could confirm the basic performance of actuating system through the single test and gereral developing work of any actuating systems was finished with a single performance test of actuating system without system integration test. But, we suggested that system integration test be needed. System integration test is carried out using G/C HILS(Guidance and Control Hardware-In-the -Loop Simulation) which is constituted flight motion simulator, load simulator, real time host computer and the related subsystems such as inertial navigation system, power supply system and Guidance and Control Computer etc.. The most important practical contribution of this paper is that full system characteristics such as minimal control effort, enhancement of guidance and autopilot performance by the actuating system using G/C HILS technique are investigated. Through full running G/C HILS, in spite of the passing to single tests, some control algorithm resulted in failure as to stability of full system and system time frame.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 추계 학술논문 발표대회
• /
• pp.189-190
• /
• 2011

The purpose of this study is to suggest the development direction for vendor management in plant construction. Therefore this research has proposed the integration management of vendor and information standardization. This research has proposed that plant industry association manage the basic information of vendor. And each company manage the performance evaluation of vendor's firm. Expecially, vendor management system should be developed by ISO information system.

• 정보기술과데이타베이스저널
• /
• 제8권1호
• /
• pp.25-40
• /
• 2001

Bibliographic information-based MARC format is using in 66 countries, and it has been keeping the position of acknowledged information system in many national libraries. But the development of exchange format about integrated database to run integration the factual information and bibliographic information integrative is necessary. Actually factual information and bibliographic information are required frequently in the library. This paper was to extract the element field of factual information that will be expanded at the libraries, and to make the basic data of integrated database-based interactive format through comparative analysis of varied record format to be used around the world.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.56.5-56
• /
• 2001

In the three axis control of satellite by using reaction wheel and gyro, a reaction wheel produces the control torque by the wheel speed or momentum, and a gyro carries out measuring of the attitude angle and the attitude angular velocity In this study, dynamic modelling of the Low Earth Orbit (LEO) is consisted of the one from the rotational motion of the satellite with the basic rigid body and a flexible body model, and the gyro in addition to the reaction wheel model. The results obtained by the robust controller are compared with those of the PI (Proportional and Integration) controller which is commonly used for the stabilizing satellite.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국제학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.928-933
• /
• 1988

Control technology has been making remarkable progress in electrical control (E), instrumentation & control (I) and computer control (C) field respectively. In order to rationalize system engineering and simplify system configuration and operation work, so called, EIC are now to be integrated into one system. FUJI has developed it's own E, I&C integrated system, to meet above mentioned market requirements of variety. This paper describes basic concept of FUJI's Integrated Man-Machine Interface, hereinafter called SINGLE CONSOLE, from some view points of E, I, C integration technology.

• Journal of applied mathematics & informatics
• /
• 제5권3호
• /
• pp.735-748
• /
• 1998

We analyze the error in the p version of the of the finite element method when the effect of the quadrature error is taken in the load vector. We briefly study some results on the $H^{1}$ norm error and present some new results for the error in the $L^{2}$ norm. We inves-tigate the quadrature error due to the numerical integration of the right hand side We present theoretical and computational examples showing the sharpness of our results.