• Spatial Information Research
• /
• v.16 no.3
• /
• pp.331-342
• /
• 2008

The countries are trying to expand the sea limit such as the territorial sea, fishing zone or the exclusive economic zone as far as the Law of the Sea permit to do for the benefit of their national interest. Especially, they are eager to claim the base point where it locates far from the coastline even if it is uninhabited island or reef under the sea. The baseline has been claimed to maximize the territorial sea. Another way to expand the sea limit is to lower the vertical datum to change the land limit. China claimed Dongdo which is located about 79 miles far from the coast as the base point. Japan also claimed many uninhabited island or the reef which is located very far from the coast such as Okino Dorishima. As Korea is the party who negotiate the maritime limit with Japan and China, we should be keen and sensitive on the issues claimed by neighboring countries in terms of base point and the baseline. This paper is to review the characteristics of the base points or baselines of neighboring countries and to suggest the views how to maintain and to relocate our base points. As western coast of Korean peninsula is one of the largest tide fluctuation zone in the world, with long tidal record to prove the vertical datum adjustment, Korea can find the way to lower the vertical datum especially in Yellow Sea. So, major and critical tidal station has to be set up along the western coast to verify tide fluctuation record which can be met with international standard.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.139-140
• /
• 2010

Recently, Many countries are promoting rapidly development of marine. As they are very committed for the purpose of securing territorial sea. Disagreements between countries had being emphasized the importance of terrirorial sea. As the South Korea has been at the center of a territorial dispute between Japan and China, the South Korea should be encouraged to expand the nation. The purpose of this study is to derive the improvement plan of Efficient control of the territorial base point through the analyses of the existing control of the territorial base point and check of the territorial base point.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.10
• /
• pp.775-784
• /
• 2013

Mobile operators are considering a variety of technical measures to cope with the explosion of data while reducing TCO(Total Cost of Ownership) of their networks. In this paper, to investigate the possibility about one of such technical measures, system level simulation to evaluate the performance of the capacity and mobility was performed in cloud base station structure to apply coordinated multi-point transmission and reception. As a result, we find out that system capacity and mobility performance may be improved according to the scale and application area of cloud base station with the operation of coordinated multi-point transmission and reception, and these mutual causality can provide practical guidelines to mobile network's operation.

• Journal of Internet Computing and Services
• /
• v.23 no.5
• /
• pp.9-15
• /
• 2022

This paper proposes a coordinated multi-point communication (CoMP) method with channel selection to improve performance of a macro user equipment (MUE) in a dense small-cell network environment in a building located within coverage of a macro base station (MBS). In the proposed CoMP method, in order to improve the performance of the MUE located in the building, A small-cell base station (SBS) selects a channel with lower interference to the neighboring MUE and transmits appropriate signals to the MUE requiring CoMP. Simulation results show that the proposed CoMP method improves the performance of the MUE by up to 164% and 51%, respectivley, compared to a random channel allocation based traditional SBS network and CoMP method.

• Tribology and Lubricants
• /
• v.18 no.4
• /
• pp.255-259
• /
• 2002

The tribological properties of eight different liquid crystals were investigated in a concentrated point contact device and a ball-on-flat contact. For comparison, the same tests were also performed with commercial greases and the corresponding base oils. Under the fully flooded conditions studied, liquid crystals in a concentrated point contact showed lower friction than commercial greases and greater film thickness dependence on rolling speed than grease base oils or greases. Test results also showed that the film thickness and friction were little influenced by the composition of the examined liquid crystals.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.34 no.6
• /
• pp.421-425
• /
• 2012

Purpose: The aim of this study is to compare the soft tissue changes of the midfacial area at the repose position and the natural smiling position for the improvement of evaluation and planning in the orthognathic surgery. Methods: The total of 30 subjects, 15 male and 15 female, were included in this study. The metal point landmarks were placed at the cheek, orbital rim, subpupil, and nasal base. The movements of the landmarks were evaluated at the repose position and smiling position in the lateral and posteroanterior cephalograms. Paired t test and correlation analysis were used for the evaluation of the soft tissue changes statistically. Results: In the lateral cephalograms, the cheek point (4.49 mm in female, 4.87 mm in male) showed the most distant movement. All points presented significant movements, except the orbital rim and nasal base point in male. Cheek point presented significant positive correlation between the horizontal and vertical change in male. Subpupil point presented significant positive correlation between horizontal and vertical change in both male and female. In the posteroanterior cephalograms, the nasal base point (5.41 mm in female, 6.30 mm in male) showed the most distant movement. Subpupil point and nasal base point presented significant movements in both female and male. Nasal base point presented significant negative correlation between the horizontal and vertical change in both male and female. In the lateral and posteroanterior cephalograms, the positional changes of all points presented significant positive correlation with each other in both female and male. Conclusion: The cheek point in the sagittal view and the nasal base point in the frontal view showed the most distant movement on smile. In the sagittal view, the subpupil point and cheek point moved anteriorsuperiorly on smile. In the frontal view, the nasal base points moved laterosuperiorly on smile. In both the sagittal and frontal view, the positional changes of all point were highly correlated to each other. These results may be used in the soft tissue references for the treatment planning of the dentofacial deformity patients.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10a
• /
• pp.55-62
• /
• 2002

Significant changes in the performance requirements of finished lubricants is having a pronounced impact on the quality and manufacturing approach for base stocks, the building block for these products. Separation processing is no longer capable of producing high yields of premium base stocks and is rapidly being replaced with hydroprocessing. Isoparaffins are the most desirable component because of their high Viscosity Index, low pour point and excellent stability. This paper will discuss industry trends and the drive towards higher quality base stocks. Manufacturing options are discussed and examples presented to demonstrate the performance of these premium base stocks.

• Journal of Positioning, Navigation, and Timing
• /
• v.11 no.4
• /
• pp.369-379
• /
• 2022

In weighted k-nearest neighbor (WkNN)-based Fingerprinting positioning step, a process of comparing the requested positioning signal with signal information for each reference point stored in the fingerprint DB is performed. At this time, the higher the number of matched base station identifiers, the higher the possibility that the terminal exists in the corresponding location, and in fact, an additional weight is added to the location in proportion to the number of matching base stations. On the other hand, if the matching number of base stations is small, the selected candidate reference point has high dependence on the similarity value of the signal. But one problem arises here. The positioning signal can be compared with the repeater signal in the signal information stored on the DB, and the corresponding reference point can be selected as a candidate location. The selected reference point is likely to be an outlier, and if a certain weight is applied to the corresponding location, the error of the estimated location information increases. In order to solve this problem, this paper proposes a WkNN technique including an outlier removal function. To this end, it is first determined whether the repeater signal is included in the DB information of the matched base station. If the reference point for the repeater signal is selected as the candidate position, the reference position corresponding to the outlier is removed based on the clustering technique. The performance of the proposed technique is verified through data acquired in Seocho 1 and 2 dongs in Seoul.

• The Journal of Advanced Prosthodontics
• /
• v.3 no.3
• /
• pp.136-139
• /
• 2011

PURPOSE. A new light curing urethane dimethacrylate and a cold curing resin with simpler and faster laboratory procedures may have even improved flexural properties. This study investigated the 3-point flexural strengths and flexural moduli of two alternate base materials. MATERIALS AND METHODS. A cold curing resin (Weropress) and a light curing urethane dimethacrylate base material (Eclipse). Along with Eclipse and Weropress, a high impact resin (Lucitone199) and three conventional base materials (QC 20, Meliodent and Paladent 20) were tested. A 3-point bending test was used to determine the flexural strengths and flexural moduli. The mean displacement, maximum load, flexural modulus and flexural strength values and standard deviations for each group were analyzed by means of one-way analysis of variance (ANOVA) (with mean difference significant at the 0.05 level). Post hoc analyses (Scheffe test) were carried out to determine the differences between the groups at a confidence level of 95%. RESULTS. Flexural strength, displacement and force maximum load values of Eclipse were significantly different from other base materials. Displacement values of QC 20 were significantly different from Lucitone 199 and Weropress. CONCLUSION. The flexural properties and simpler processing technique of Eclipse system presents an advantageous alternative to conventional base resins and Weropress offers another simple laboratory technique.

• International Journal of Control, Automation, and Systems
• /
• v.6 no.5
• /
• pp.677-688
• /
• 2008

In this paper, the general problem of impedance control for a robotic manipulator with a moving flexible base is addressed. Impedance control imposes a relation between force and displacement at the contact point with the environment. The concept of impedance control of flexible base mobile manipulator is rather new and is being considered for first time using singular perturbation and new sliding mode control methods by authors. Initially slow and fast dynamics of robot are decoupled using singular perturbation method. Slow dynamics represents the dynamics of the manipulator with rigid base. Fast dynamics is the equivalent effect of the flexibility in the base. Then, using sliding mode control method, an impedance control law is derived for the slow dynamics. The asymptotic stability of the overall system is guaranteed using a combined control law comprising the impedance control law and a feedback control law for the fast dynamics. As first time, base flexibility was analyzed accurately in this paper for flexible base moving manipulator (FBMM). General dynamic decoupling, whole system stability guarantee and new composed robust control method were proposed. This proposed Sliding Mode Impedance Control Method (SMIC) was simulated for two FBMM models. First model is a simple FBMM composed of a 2 DOFs planar manipulator and a single DOF moving base with flexibility in between. Second FBMM model is a complete advanced 10 DOF FBMM composed of a 4 DOF manipulator and a 6 DOF moving base with flexibility. This controller provides desired position/force control accurately with satisfactory damped vibrations especially at the point of contact. This is the first time that SMIC was addressed for FBMM.