• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1998년도 제28회 추계학술대회
• /
• pp.181-189
• /
• 1998

In order to investigate the effect of base oil composition on the electronic insulating oil's performances, an experimental study has been conducted using different oils. Owing to their properties, like lower pour point and gas absorbing, naphthenic base oils are used more often than paraffmic base oils for the electronic insulating oil application. Naphthenic and paraffinic base oils are significantly different in their aromatic hydrocarbon content. In this paper, PXE(para xylyl ethane), LAB(linear alkylbenzene), C13 aromatic hydrocarbon mixture and C17 aromatic hydrocarbon mixture are investigated regarding their influence on insulating oil's performances. According to present study, breakdown voltage decreased with increasing aromatic lydrocarbon content in a deep dewaxed paraffmic base oil. However, any changing in the dissipation factor was not recognizable at small treated level. Furthermore, the volume resistance was not influenced by aromatic hydrocarbon content. The gassing tendency was found as a highly sensible property, changing with treating aromatic hydrocarbons. The higher benzene ring content in the hydrocarbon, the better gassing tendency.

• 대한전자공학회논문지
• /
• 제27권1호
• /
• pp.37-45
• /
• 1990

In this paper, a knowledge base editor is presented as a supporting environment for an expert system building tool, OPS5. The knowledge base editor is especially useful for the fast and easy development of a knowledge base when the OPS5 production language is used. This knowledge base editor has some special facilities such as syntax and type checking, rule browsing and automatic bokkeeping. The syntax and type checking provides the facilities to find syntax and type errors in an edited knowledge base, respectively. The rule browsing facility offers various pattern matching schemes to see the causes and effects of a concerned rule. Automatic bookkeeping keeps the updated date and user name of a rule for the later reference whenever a user adds or changes a rule.

• 대한치과기공학회지
• /
• 제7권1호
• /
• pp.53-59
• /
• 1985

This paper aims to examine baes metal alloy in all its aspects - the roles of elements, the content of every element according to uses, characters, laboratory technique methods and the kind of artificial base metal alloy registered in A.D.A. Specification. The results are as follows; 1. Base metal alloy is used widely bacaues it is rather cheap, but it should be handled appropriately in operating because its quality is bad. 2. Classifying base metal alloy, it is classified into Co-Cr alloy, Ni-Cr alloy, and Ni-Cr-Co alloy according to element, it is classified into partial denture alloy, surgical alloy and crown & bridge alloy according to use. 3. Among elements of base metal alloy, Bellium lowers the melting point of the alloy and increases the strength, but the amount should be limited when it is used because it destroys the organization of a living body. 4. The investments for base metal alloy are ethyl silcate bonded investment and phosphate bonded investment which endure well at high burn out temperature. 5. A.D.A specification No.14 in Kore contains Niranium, Nobilium, regalloy, Ticonium and Vitallium.

• Journal of Positioning, Navigation, and Timing
• /
• 제10권3호
• /
• pp.207-214
• /
• 2021

A new positioning technique for positioning of LTE base stations is proposed. The positioning information of the base station is absolutely necessary for model-based wireless positioning, and is required in some of the various merhodologies for estimating signals in an uncorrected area when construnting a database for fingerprinting-based positioning. Using the acquired location-based Reference Signal Received Power (RSRP) information to estimate the location of the base station, it is impossible with the existing trilateration methods. Therefore, in this paper, a method using reference particles is proposed. Particles are randomly generated in the application area, and signal propagation modeling is performed assuming that a base station is located in each particle. Based on this, the errors of measurements are calculated. The particle group with the minimum measurement errors is selected, the position of the base station is estimated through weighted summation, and the signal propagation model of the corresponding base station is built at the same time. The performance of the proposed technology is verified using data acquired in Seocho-dong, Seoul.

• Steel and Composite Structures
• /
• 제44권1호
• /
• pp.1-15
• /
• 2022

The weld quality has always been an important factor affecting the development of exposed CFT column-base joint. In this paper, a new type of exposed RCFST column-base joint is proposed, in which the high strength steel bars (USD 685) are set through the column and reinforced concrete foundation without any base plate and anchor bolts. Three specimens, the varying axial force ratio (0, 0.25 and 0.5), were tested under cyclic loadings. In addition, the bending moment capacity, energy dissipation capacity and deformation capacity of column-base joints were clarified. The experimental results indicated that the axial force ratio increases the stiffness and the bending moment and improves the energy dissipation capacity of column-base joints. This is because a large axial force can limit the slip between steel tubular and infilled concrete effectively. The specimens show stable hysteresis behavior.

• 산업경영시스템학회지
• /
• 제20권44호
• /
• pp.123-128
• /
• 1997

A data base design framework for predictive a preventive-maintenance system is presented in this paper in order to effectively control machines and reduce accident rates in the workplace. The data base is designed to meet general management requirements to evaluate different maintenance strategies. There are seven data files: the equipment list maintenace pesonnel, maintenance history, maintenance specification, spare part, maintenance equipment, and maintenance schedules. Each data base file has several record based upon data acquisition.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1996년도 추계학술대회 학술발표 논문집
• /
• pp.129-132
• /
• 1996

In this paper, we suggest a framework to represent the fuzziness in knowledge base as a perspective of the object-oriented paradigm. We divide the knowledge base in two parts. One is the object-base that stores the fuzzy propositions and the explanatory databases. The other is the rule-base that manages the rules between the fuzzy propositions. As the first step, we have to develop a new fuzzy object model that gives an easy way to represent the fuzzy propositions, that is, the fuzzy knowledge in the real world.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1997년도 가을 학술발표회 논문집
• /
• pp.231-238
• /
• 1997

Many methods have been proposed for achieving optimum performance of structures subjected to earthquake excitation. The conventional approach requires that structures passively resist earthquakes through a combination of strength, deformability, and energy absorption. Base isolation is a technique for mitigating the effects of earthquakes on structures through the introduction of flexibility and energy absorption capability. In this paper, a parametric study of effectiveness of isolation systems with various main structures' properties is carried out through the response spectrum analysis. It is shown that, most base isolators with its longer period and higher damping can significantly reduce the base shear force transmitted to the structures.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2017년도 춘계학술대회
• /
• pp.754-755
• /
• 2017

본 논문에서는 최근 21세기의 지식정보화 시대의 ICT 분야에서 그 중요성과 응용 부분이 극대화되고 있는 유한체상에서의 기저 변환에 대한 한 가지 방법을 제안하였다. 제안한 방법은 기존의 방법에 비해 규칙적이고 확장성의 용이하고, 각종 IT 분야에 적용 및 응용이 가능하다.

• ETRI Journal
• /
• 제26권5호
• /
• pp.493-496
• /
• 2004

An effective paging strategy is essential for improving the utility of radio channels. This paper proposes a two-step paging strategy which involves using base station paging agents to page a single cell at each paging. An analytical model is used to evaluate the performance of the proposed strategy. The proposed strategy is compared with the traditional simultaneous paging strategy and a recent proposal using the base station paging agents. The numerical results showed that the proposed strategy proficiently reduces paging cost on radio channels compared with other paging strategies.