• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.340-343
• /
• 2007

In this paper, we present our method to reduce vibration of the base plate of a refrigerator by avoiding resonance between base plate and compressor operation. To verify the modes of the base plate, FE models of the base plate with free-free condition and applied boundary condition were built and validated by results from experimental modal analysis. Operating Deflection Shape analysis was applied to find the sensitive area on the base plate during compressor operation. In optimization process, Finite Difference Method - based sensitivity analysis is used to detect the most sensitive area. Finally, based on this numerical result, we will make beads on the base plate to reduce vibration of refrigerator.

• 대한기계학회논문집A
• /
• 제36권2호
• /
• pp.211-216
• /
• 2012

이 논문은 배터리의 위치 변화에 따라 발생되는 OLEV의 처짐 개선을 위한 배터리 지지구조물의 설계에 대한 것이다. 배터리의 위치 변화에 따른 OLEV의 동강성을 유한요소해석을 통해 분석하였고, 동강성이 가장 높은 위치를 찾았다. 배터리 하중에 의한 최대 처짐을 정적 해석을 통해 분석하였다. 발생된 처짐을 줄이기 위해서 기본 프레임 부재별 기여도와 보강재 사용 시 보강재의 위치에 따른 기여도에 대한 평가를 수행하였고, 기여도가 높은 기본 프레임과 보강 프레임을 사용한 개선 모델을 선정하였다. 개선 모델을 사용하여 정적 해석을 수행하였고, 기본 모델과의 결과를 비교하였다. 기여도 평가를 통한 개선 및 보강으로 처짐을 목표치 이하가 되도록 하였고, 이 때 개선 모델의 질량이 기본 모델 보다 감소하는 것을 확인할 수 있었다.

• Design & Manufacturing
• /
• 제15권1호
• /
• pp.1-7
• /
• 2021

The position of the gate is one of the important factors for optimal injection molding. This is because inappropriate gate positions cannot fill the cavity uniformly, which can lead to defects such as contraction. In this study, CAE was performed on hot runner injection molding of the washing machine base and plasticity was compared by changing gate position from existing gate position. A total of two alternatives have been applied to compare the plasticity of the washing machine base according to its optimal gate position. The gate position of the improved molds and the gate position of the current mold is analyzed by injection molding analysis. The results of the fill time, the pressure at V/P switchover, clamping force, and deflection were compared. In washing machine base injection molding, the deflection was reduced by about 3.76% in the improved mold 2. In improved mold 1, the fill time during injection molding was reduced by 3.32% to enable uniform charging, and the clamping force was reduced by 31.24%. We have confirmed that the position of the gate can change the charging pressure and the clamping force and affect the quality and cost savings of the molded product.

• 한국항해학회지
• /
• 제12권2호
• /
• pp.33-42
• /
• 1988

As a basic study for enhancing the sensitivity of the follow-up system of the marine gyrocompass, the geometric characteristics of the deflection sensor were investigated and the theoretical model of it was formulated. The output signal voltage of the deflection sensor was esamined by changing the attitude of gyrosphere against follow-up container. The characteristics of the output are found to be indentical with those of the distance difference versus the relative azimuthal deflection of the gyrosphere against the follow up container. On the base of the theoretical model, some useful points for the design of the deflection sensor are suggested as following : 1. When the difference between semidiamter of gyrophere and that of the follow-up container decreases, the sensitivity of deflection sensor increases. 2. If the semidiameter difference of two spheres is constant, the sensitivity of deflection sensor is proportional to the magnitude of the semidiamter of each sphere. 3. The farther the gyrosphere is deviated from the center of follow-up container, the higher the sensitivity of deflection sensor is. 4. It is recommendable that the value of the datum deflection of the electrodes on the gyrosphere should be within the range between $4^{\circ}$ and $16^{\circ}$deviated from north-south line.

• 전산구조공학
• /
• 제4권4호
• /
• pp.107-116
• /
• 1991

Base isolation is the alternative tool to protect structures against the earthquake. Basic ideas are the flexibflity to reduce the response of the structure, energy dissipation to reduce the excessive deflection by flexibility, and the rigidity under the service load. Base isolation is specially good for bridges because it can be installed easily and be used for both new construction and rehabilitation. This paper describes the basic ideas of base isolation, various base isolation devices and design guidelines by AASHTO. It also introduces the applications in United States and New Zealand.

• 한국도로학회논문집
• /
• 제19권2호
• /
• pp.67-74
• /
• 2017

PURPOSES : The objective of this study is to ascertain the curing period of cementless cold central plant recycled asphalt base-layer, using mechanical analyses and specimen quality tests on the field. METHODS : Cold central plant recycled asphalt base-layer mixture was produced in the plant from reclaimed asphalt, natural aggregate, filler for the cold mix, and the modified emulsion AP using asphalt mix design and plant mix design. In order to examine the applicability of the curing period during the field test, the international standards for the possibility of core extraction and the degree of compaction and LFWD deflection were analyzed. Moreover, Marshall stability test, porosity test, and indirect tensile strength test were performed on the specimens of asphalt mix and plant mix design. RESULTS : The plant production process and compaction method of cementless cold central plant recycled asphalt base-layer were established, and the applicability of the optical moisture content for producing the mixture was verified through the field test. In addition, it was determined that the core extraction method of the conventional international curing standard was insufficient to ensure performance, and the LFWD test demonstrated that the deflection converges after a two-day curing. However, the back-calculation analysis reveals that a three-day curing is satisfactory, resulting in a general level of performance of dense asphalt base-layer. Moreover, from the result of the specimen quality test of the asphalt mix design and plant mix design according to the curing period, it was determined that the qualities satisfied both domestic and international standards, after a two-day curing. However, it was determined that the strength and stiffness after three-day curing are higher than those after a two-day curing by approximately 3.5 % and 20 %, respectively. CONCLUSIONS:A three-day curing period is proposed for the cementless cold central plant recycled asphalt base-layer; this curing period can be demonstrated to retain the modulus of asphalt-base layer in the field and ensure stable quality characteristics.

• 대한건축학회논문집:구조계
• /
• 제35권7호
• /
• pp.147-156
• /
• 2019

The purpose of this study is to consider structural issues and analyze construction sequences when constructing hanging floors supported by Mega truss. Since suspended structures were supported by the Mega truss, vertical load on suspended structures was needed to transfer from low to high. Deflection management of structures was the primary point under construction. The results of this study were as follows; The steel structures, which has relatively lighter self-weight, were constructed upwards after the base floor steel truss erection. Concrete Placing, which has relatively heavier self-weight, were performed in two phases to minimize structure's deflection. Slab was placed downwards from the top floor to lower floor whereas column was places upwards. Deflection measurements were carried out at every construction sequences.

• 대한토목학회논문집
• /
• 제9권1호
• /
• pp.97-107
• /
• 1989

본 연구에서는 falling weight deflectometer(FWD)시험의 표면 처짐곡선으로부터 3층 아스팔트 포장 구조체의 물성을 추정할 수 있는 역산반복기법을 개발하였다. 안정처리기층과 쇄석기층을 갖는 포장구조체에 대한 요소설계를 실시하여 일련의 해석모델을 설정하고, 다층탄성해석에 의해 이들 해석모델의 이론적 처짐곡선을 산정하여 처짐특성 분석 및 탄성계수 추정식을 구하였다. 반복역산시 추정식에 의한 각 층 탄성계수를 초기 가정치로 하고, 탄성계수 변화율과 처짐 변화율의 관계를 구하여 이들 탄성계수 보정에 사용하였다. 다층탄성해석은 전산 프로그램 SINELA를 이용하였다. 처짐특성 분석을 통한 보다 효율적인 역산반복기법을 전산화하였으며, 수치모델을 통해 그 신뢰성 및 적용성을 검증하였다.

• 대한토목학회논문집
• /
• 제44권2호
• /
• pp.203-214
• /
• 2024

항만은 노상 하부가 연약지반으로 구성되어 있으며, 빈번한 중하중 장비 운행에 따라 부등 침하, 균열 등의 포장 피해가 흔히 발생한다. 본 연구에서는 항만 콘크리트 블록을 개발하여 2가지로 구분되는 포장 단면으로 ◯◯항에 블록 포장을 시공하였으며, 포장체 성능 및 포장 표면에서 나타나는 침하 특성을 분석하였다. 포장체 성능을 분석하기 위하여 3회의 FWD 시험이 수행되었으며, 시간의 흐름에 따른 침하 특성을 분석하기 위하여 3회의 LiDAR 계측을 수행하였다. 시멘트 처리기층 단면의 블록 포장에 대해 시공 7개월 이후 수행된 FWD 시험에서 아스팔트 포장보다 더 낮은 처짐이 발생하여 상대 처짐비가 1보다 적게 나타났다. 이는 항만 운영에 따른 하부지반 안정화로 인해 블록 포장의 지지력이 향상되었기 때문이라고 판단된다. 전체 포장 단면의 침하 특성을 분석하기 위해 수행된 LiDAR 계측에서는 시공 초기 중장비 등의 상재하중으로 인해 쇄석기층 내 다수의 침하 구간이 확인되었다. 상대 처짐비와 LiDAR 계측 결과는 동일한 경향을 나타내었으며, 콘크리트 블록 포장의 높은 활용성과 시멘트 처리기층 단면의 지지력 향상 효과를 바탕으로 다양한 항만 부지에 널리 적용될 수 있을 것으로 판단된다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.815-820
• /
• 2011

The railway bridge of the domestic still has been used steel base such as sperical bearing and pot bearing widely. However, the bearing of steel series is occured corrosion frequently, reduced durability and raised maintenance cost excessively due to the nature of the material. If the elastomeric bearing which is widely used in highway bridge is applied to the railway bridge, it will be able to compensate this defect a lot. In order to apply to the railway bridge used for highway bridge, is needed the control of the bridge ends deflection, lateral displacement and negative reaction. Therefore, the elastomeric bearing can be applied to the railway bridge enough, if installed negative reaction key for control of the bridge ends deflection, improved shear wedge performance for control of the lateral force, adjust the thickness of the elastomeric pad for the minimize deflection, in addition, can be economic design of sub-structures due to damping effect.