• Wind and Structures
• /
• v.18 no.4
• /
• pp.423-441
• /
• 2014

The high frequency base balance (HFBB) technique is a convenient and relatively fast wind tunnel testing technique for predicting wind-induced forces for tall building design. While modern tall building design has seen a number architecturally remarkable buildings constructed recently, the characteristics of those buildings are significantly different to those that were common when the HFBB technique was originally developed. In particular, the prediction of generalized forces for buildings with 3-dimensional mode shapes has a number of inherent uncertainties and challenges that need to be overcome to accurately predict building loads and responses. As an alternative to the more conventional application of general mode shape correction factors, an analysis methodology, referred to as the linear-mode-shape (LMS) method, has been recently developed to allow better estimates of the generalized forces by establishing a new set of centers at which the translational mode shapes are linear. The LMS method was initially evaluated and compared with the methods using mode shape correction factors for a rectangular building, which was wind tunnel tested in isolation in an open terrain for five incident wind angles at $22.5^{\circ}$ increments from $0^{\circ}$ to $90^{\circ}$. The results demonstrated that the LMS method provides more accurate predictions of the wind-induced loads and building responses than the application of mode shape correction factors. The LMS method was subsequently applied to a tall building project in Hong Kong. The building considered in the current study is located in a heavily developed business district and surrounded by tall buildings and mixed terrain. The HFBB results validated the versatility of the LMS method for the structural design of an actual tall building subjected to the varied wind characteristics caused by the surroundings. In comparison, the application of mode shape correction factors in the HFBB analysis did not directly take into account the influence of the site specific characteristics on the actual wind loads, hence their estimates of the building responses have a higher variability.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.24 no.3
• /
• pp.85-98
• /
• 2021

In this study, the characteristics of tree growth and soil environment were analyzed at 5 sites that had been planted on the back slope of dam for more than 15 years in Korea. First, as a result of investigating the growth of 15 trees planted on the back slope of the dam, the average height was 10.6m, diameter at roots was 27.3cm, and DBH was 22.9cm, showing good growth status of most of the trees. In particular, the growth levels of pine, hackberry, and oak were similar or better than those of general forests and artificial ground. As a result of excavating and investigating the roots of trees, horizontal roots grew well in the left and right directions of the back slope of the dam, and the growth of vertical roots was insufficient. Currently, the roots of trees do not directly affect dam safety, but they may continue to grow in the long term and interfere with dam management. Second, the physicochemical characteristics of the soil on the back slope of dam were generally above the intermediate level in terms of landscape design standards, and were similar to those of the domestic forest soil. Therefore, although it was judged to be suitable for plant growth, isolation of the site, soil acidification, and nutrient imbalance may affect tree growth and forest health in the long term. Through this study, it was possible to confirm the potential and applicability of planting area on the back slope of dam as an ecological base. Continuous monitoring is required for safety management and ecological value of dams in the future, and through this, it will be possible to secure the feasibility of planting trees on the slopes of new or existing dams and improving management.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.4
• /
• pp.213-219
• /
• 2021

Polytetrafluoroethylene (PTFE) is a commercialized friction material in friction pendulum systems used for earthquake hazard mitigation in structures, and it has excellent chemical resistance and frictional performance. However, PTFE has a relatively low wear resistance for the friction pendulum systems in service. As an alternative to PTFE, a cost-effective frictional material, polyvinylidene fluoride (PVDF) strengthened by magnesium oxide (MgO), with enhanced wear resistance performance is proposed in this study. The frictional performance of the developed PVDF/MgO was evaluated through experiments and compared with that of PTFE. Accordingly, a friction pendulum system was designed using the measured friction coefficient. The performance of this friction pendulum system was evaluated via nonlinear time history analyses of bridges. Subsequently, the plausibility of using PVDF/MgO as an alternative to PTFE as a friction material for friction pendulum systems was discussed.

• Journal of Microbiology and Biotechnology
• /
• v.32 no.8
• /
• pp.1041-1046
• /
• 2022

Nucleoside deoxyribosyltransferase (NDT) is an enzyme that replaces the purine or pyrimidine base of 2'-deoxyribonucleoside. This enzyme is generally used in the nucleotide salvage pathway in vivo and synthesizes many nucleoside analogs in vitro for various biotechnological purposes. Since NDT is known to exhibit relatively low reactivity toward nucleoside analogs such as 2'-fluoro-2'-deoxynucleoside, it is necessary to develop an enhanced NDT mutant enzyme suitable for nucleoside analogs. In this study, molecular evolution strategy via error-prone PCR was performed with ndt gene derived from Lactobacillus leichmannii as a template to obtain an engineered NDT with higher substrate specificity to 2FDU (2'-fluoro-2'-deoxyuridine). A mutant library of 214 ndt genes with different sequences was obtained and performed for the conversion of 2FDU to 2FDA (2'-fluoro-2'-deoxyadenosine). The E. coli containing a mutant NDT, named NDT^L59Q, showed 1.7-fold (at 40℃) and 4.4-fold (at 50℃) higher 2FDU-to-2FDA conversions compared to the NDT^WT, respectively. Subsequently, both NDT^WT and NDT^L59Q enzymes were over-expressed and purified using a His-tag system in E. coli. Characterization and enzyme kinetics revealed that the NDT^L59Q mutant enzyme containing a single point mutation of leucine to glutamine at the 59^th position exhibited superior thermal stability with enhanced substrate specificity to 2FDU.

• Korean Journal of Materials Research
• /
• v.33 no.7
• /
• pp.285-294
• /
• 2023

Porous ceramics are used in various industrial applications based on their physical properties, including isolation, storage, and thermal barrier properties. However, traditional manufacturing environments require additional steps to control artificial pores and limit deformities, because they rely on limited molding methods. To overcome this drawback, many studies have recently focused on fabricating porous structures using additive manufacturing techniques. In particular, the binder jet technology enables high porosity and various types of designs, and avoids the limitations of existing manufacturing processes. In this study, we investigated process optimization for manufacturing porous ceramic filters using the binder jet technology. In binder jet technology, the flowability of the powder used as the base material is an important factor, as well as compatibility with the binder in the process and for the final print. Flow agents and secondary binders were used to optimize the flowability and compatibility of the powders. In addition, the effects of the amount of added glass frit, and changes in sintering temperature on the microstructure, porosity and mechanical properties of the final printed product were investigated.

• Korean Journal of Social Welfare Studies
• /
• v.44 no.2
• /
• pp.409-436
• /
• 2013

The purpose of this study is to examine the residential institutions for the disabled in Korea on the base of welfare rights, and to propose some actual ways for improvement. For this, we analyzed the attributes of the residential institutions for the disabled in Korea. The results shows that the residential institutions for the disabled in Korea are characterized by massiveness, isolation, inequality in power, and no choice. For improvement we suggested that the residential institutions for the disabled should be run by the principles of supplement, normalization, inter-reliance, and individualization. In order to achieve these goals, the government has to invest the needs for de-institutionalization of the users, run the institutions on the smaller scale and replace them in communities, and systemize the person-centered support and service provision processes. In addition to them, the managers of the institutions should try to socialize the institutions, and to increase the participation of the users in management.

• Nuclear Engineering and Technology
• /
• v.56 no.7
• /
• pp.2595-2609
• /
• 2024

This paper introduces a base isolation system-tuned mass damper inerter (BIS-TMDI) hybrid system to the AP1000 nuclear power plant (NPP), which reduces seismic damage potential of the NPP structure. The effects of fluid-structure interaction (FSI) caused by the passive containment cooling system water storage tank (PCCWST) on NPP's seismic performance are investigated. The FSI of water tank theoretical model is considered based on the Housner's model, and a series of time history analyses are performed to prove the rationality of the proposed model. Three single-objective optimization strategies are employed to minimize the relative displacement variance and absolute acceleration variance of the upper structure, as well as the filtered energy index (FEI). Furthermore, a multi-objective optimization strategy considering all these three indexes is proposed to obtain optimal parameters of vibration control. The influence of vibration control strategies on the relative deformation and acceleration of the upper structure is explored with various water level ratios. The analytical results indicate that the proposed BIS-TMDI strategy has significantly reduced the NPP structure's seismic response. The effectiveness of the vibration control strategy is influenced by the water level ratio, emphasizing the significance of designing an appropriate water level ratio to reduce NPP structure's seismic response.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.58 no.2
• /
• pp.149-160
• /
• 2013

The objective of present study was to simultaneously isolate of isoflavone and soyasaponin compounds from the germ of soybean seeds. Soy germ flours were defatted with hexane for 48h at room temperature, and methanolic extracts were prepared using reflux apparatus at $90^{\circ}C$ for 6h, two times. After extraction, extracts were separated with preparative RP-$C_{18}$ packing column ($125{\AA}$, $55-105{\mu}m$, $40{\times}150mm$), and collected 52 fractions were identified with TLC plate (Kieselgel 60 F-254) and HPLC, respectively. Among the identified isoflavone and soyasaponin fractions, isoflavone fractions were re-separated using a recycling HPLC with gel permeation column (Jaigel-W252, $20{\times}500mm$). Final fractions were air-dried, and the purified compounds of two isoflavones (ISF-1-1, ISF-1-2) and four soyasaponins (SAP-1, SAP-2, SAP-3, SAP-4) were obtained. Two isoflavone compounds (ISF-1-1, ISF-1-2) were acid-hydrolyzed for the identification of their aglycones, and confirmed by comparing with 12 types of isoflavone isomers. While the four kinds of soyasaponins were identified by using a micro Q-TOF mass spectrometer in the ESI positive mode with capillary voltage of 4.5kV, and dry temperature of $200^{\circ}C$. Base on the obtained results, it was conclude that ISF-1-1 is the mixture isomers of daidzin (43.4%), glycitin (47.0%), and genistin (9.6%), but ISF-1-2 is the single compound of genistin (99.8% <). On the other hand, soyasaponin SAP-1 is the mixture compounds of soyasaponin A-group (Aa, Ab, Ac, Ae, Af); SAP-2 is soyasaponin B-group (Ba, Bb, Bc) and E-group (Bd, Be); SAP-3 is soyasaponin B-group (Ba, Bb, Bc), E-group (Bd, Be), and DDMP-group (${\beta}g$); SAP-4 is soyasaponin B-group (Ba, Bb, Bc), E-group (Bd, Be), and DDMP-group (${\beta}g$, ${\beta}a$), respectively.

• Journal of Food Hygiene and Safety
• /
• v.22 no.2
• /
• pp.82-87
• /
• 2007

This research was performed to investigate chemical and microbiological hazards of Ready-to-eat(RTE) compound foods which uses the by-product of meat. For this experiment, 51 samples of RTE compound foods in by-product of meat distributed in Incheon from January to December 2006 were tested. The contents of heavy metals in the main ingredient of RTE compound foods were in the range of $0.073{\sim}0.112ppm$ for lead (Pb), $0.006{\sim}0.013ppm$ for cadmium (Cd) and $0.746{\sim}0.978ppb$ for mercury (Hg). The concentrations of residual ABS(alkyl benzene sulfate) in the small intestine which is a main ingredient of Gopchang-casserole were $$0.8ppm{\sim}57.6ppm$ (Ave. 10.3ppm). Staphylococcus aureus was isolated from 11 samples (21.6%) among 51 main ingredients of RTE compound foods. The isolation rates of Salmonella spp. and Clostridium perfringens were 2.0% (1/51) and 5.9% (2/51), respectively. By types of main ingredient, the small intestine was showed the highest isolation rate as 35.3% (12/34), ham and the sausage which are main ingredients of the Budae-pot stew were 25% (2/8) and other meat products were 20% (1/5). Food poisoning bacteria was not found in the blood of pig which is a main ingredient of the Sunji-pot stew. 28.4% (27/95) of sauce included in each RTE compound foods were coliform bacteria positive. Pesticide residues were found in four of 45 vegetables which are the additional ingredient of RTE compound foods. The concentrations of pesticide were chlorothalonil 2.8 ppm, EPN 10.3 ppm, chlorpyrifos 0.4ppm and indoxacarb 0.7ppm. In 33 bean sprout samples, captan and carbendazim were not detected.

• Journal of Life Science
• /
• v.26 no.4
• /
• pp.496-502
• /
• 2016

This review describes the diversity of Korean fermented foods and their significance as potential sources of probiotic bacteria. Fermented foods consumed in Korea are categorized according to their base material. Fermented foods such as kimchi, meju, doenjang, kangjang, jeotgal, and makgeolli are reported to have significant medicinal properties. These fermented products, which are consumed regularly by local people, are rich sources of beneficial microbes represented by several genera, including Weissella spp., Lactobacillus spp., Leuconostoc spp., Mucor, Penicillium, Scopulariopsis, Aspergillus, Rhodotorula, Candida, Saccharomyces, and Bacillus, as well as lactic acid bacteria. Fermented foods are now taken beyond the boundaries of their use as mere side dishes and are used significantly as a functional as well as medicinal foods. Fermented foods are a rich source of potential natural substances with antioxidant, anticancer, anticholesteric, antiobesitic, and antiaging properties, so that traditional fermented foods used as food supplements can impart health benefits. Publication of scientific studies on the dietary benefits of various fermented foods and growing consciousness about the potential health benefits of traditional fermented food are reflected in the scores of reports currently available in this field. Food microbiologists now have abundant opportunities to explore Korean traditional fermented foods for the isolation of new bacterial strains and to evaluate the potential applications of these strains through microbiological research.