• Smart Media Journal
• /
• v.2 no.4
• /
• pp.51-59
• /
• 2013

With increasing transmission speed of backbone networks, it is getting to provide enough available bandwidth. However, the bandwidth is not effectively utilized in volumetric data transfer. This mainly comes from the transmission protocol, TCP, which is used for most applications. TCP is inherently difficult to adapt the available bandwidth because of it's own characteristic of transfer mechanism. UDT is a prominent application level data transfer protocol which is targeting high speed network. In this paper, we propose UDT parallel transfer technologies which is adaptive to network status and then evaluate their performance in two points of view. Firstly, we measure data transfer rate of UDT with rate congestion control methods, and compare them with basic UDT. Secondly, we apply parallel transfer technologies adapted to network status, and measure their performance. Experimental results showed that UDT rate congestion control method outperforms UDT with 106% improvement in RTT 100ms section set with jitter 30ms. In addition, performance of parallel transfer with rate congestion control method showed 107% improvement than that of parallel transfer in RTT 400ms section set with jitter 20ms.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.6
• /
• pp.65-70
• /
• 1999

In ATM network there exist several traffics according to QoS, such as CBR, rt-VBR, nrt-VBR, UBR, and ABR. Many studies have done at the traffic management of ABR which uses the unused network bandwidth. Many flow control mechanisms have proposed to use efficiently the unused bandwidth. In TMWG(Traffic Management Working Group) of ATM Forum, there exist rate-based, credit-based, and mixture of them to manage flow control of ABR traffic. Among these, rate-based mechanisms adopted as standard because it is flexible and also makes it possible to implement ATM switch with low price and high capacity. In this paper, we study the switch that uses EFCI, ER and VS/VD(Virtual Source/Virtual Destination) with rate-based mechanism. Instead of using queue threshold, we propose a new algorithm which uses bandwidth threshold of input stage of switch, and manages efficiently ABR traffic with EPRCA algorithm.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.9 s.339
• /
• pp.71-84
• /
• 2005

A 'VPN over Intemet' has the benefit of being cost-effective and flexible. However, it has difficulties providing sufficient QoS and adequate transmission capacity for high bandwidth service. Given the increasing demand for high bandwidth Internet and QoS assurances in a 'VPN over Internet', IP/GMPLS based on a control plane combined with a high bandwidth, DWDM optical network is seen as a very favorable anroach for realizing the future 'OVPN over IP/GMPLS over DWDM'. Within this architecture, providing QoS guaranteed multimedia services with a differentiated QoS guaranteed protocol framework with QoS recovery is one of the key issues to implement. Therefore, in this paper, we suggest the entire interoperability procedure of control protocols based on differentiated optical QoS service (DOQOS) classes for providing end-to-end QoS in an 'OVPN over IP/GMPLS over DWDM' architecture.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.1
• /
• pp.1-13
• /
• 2001

In this paper, we propose a new dynamic bandwidth allocation and call admission control for VBR video sources with QoS constraints to support an efficient resource management and at the same Lime to satisfy the user's quality or service requirements. For the dynamic bandwidth allocation, first the next amount of traffic is predicted using a modified adaptive linear prediction method that considers abrupt scene change effects. And then, we dynamically allocate the necessary bandwidth to each connection based on the currently provided quality degree by the network with respect to the user's QoS requirements in terms of average delay and loss ratio. For the admission control, we determine the acceptance or rejection or a new connection based on the quality satisfaction degrees of the existing connections. Simulation results show that our proposed dynamic schemes are able to provide a stable service, which well meets the user's quality requirements.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.8
• /
• pp.54-61
• /
• 2001

A fully on-chip open-drain CMOS output driver was designed for high bandwidth DRAMs, such that its output voltage swing was insensitive to the variations of temperature and supply voltage. An auto refresh signal was used to update the contents of the current control register, which determined the transistors to be turned-on among the six binary-weighted transistors of an output driver. Because the auto refresh signal is available in DRAM chips, the output driver of this work does not require any external signals to update the current control register. During the time interval while the update is in progress, a negative feedback loop is formed to maintain the low level output voltage ($V_OL$) to be equal to the reference voltage ($V_{OL.ref}$) which is generated by a low-voltage bandgap reference circuit. Test results showed the successful operation at the data rate up to 1Gb/s. The worst-case variations of $V_{OL.ref}$ and $V_OL$ of the proposed output driver were measured to be 2.5% and 7.5% respectively within a temperature range of $20^{\circ}C$ to $90^{\circ}C$ and a supply voltage range of 2.25V to 2.75V, while the worst-case variation of $V_OL$ of the conventional output driver was measured to be 24% at the same temperature and supply voltage ranges.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.2
• /
• pp.153-160
• /
• 1999

Dual-stage servo system for super-high density HDD has the chances of being composed of the coarse actuator(VCM) for track-seeking control and the fine actuator(microactuator) for-following control in near future. This paper presents the concept design of dual-stage servo system and the track-following control using an electrostatic microactuator for super-high density HDD. The electrostatic microactuator is designed and fabricated by MEMS(micro-electro-mechanical system) process. Both the nonlinear plant(voltage/displacement-to-electrostatic force) and the linear plant(electrostatic force-to-displacement) of the microactuator are established. Inverse function of the nonlinear plant is employed for a feedforward nonlinear compensator design. And feedforward control effect of this compensator is shown by time-domain experiments. A track-following feedback controller is designed using the feedback nonlinear compensator which is derived from the feedforward nonlinear compensator. The track-following control experiment is done to show the control efficiency of the proposed control system. And, excellent track-following control performance(2.21kHz servo-bandwidth, 7.51dB gain margin, $50.98^{\circ}$phase margin) is achieved by the proposed control system.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.20 no.6
• /
• pp.517-525
• /
• 2015

A grid connected inverter must be operated as the main electricity source under an isolated condition caused by the grid problem. Conventionally, the dual loop controller is used for the grid inverter, and the controller is used for control under the stand-alone mode. Generally, the PI(Proportional - Integral) controller is highly efficient under a synchronous reference frame, and stable control can be available. However, in this synchronous frame-based control, high-quality DSP is required because many sinusoidal calculations are necessary. When the PI control is conducted under a stationary frame, the controller constructions are made simple so that they work even with a low-price micro controller. However, given the characteristics of the PI controller, it should be designed with the phase of reference voltage considered. Otherwise, the phase delay of the output voltage can occur. Although the current controller also has a higher bandwidth than the voltage controller, distortion of the voltage is difficult to avoid only by the rapid response of the PI controller, as a sudden load change can occur in the nonlinear load. In this study, a new control method that solves the voltage controller bandwidth problem and rapidly copes with it even in the nonlinear load situation is proposed. The validity of the proposed method is proved by simulation and experimental results.

• Journal of Digital Contents Society
• /
• v.15 no.2
• /
• pp.147-154
• /
• 2014

There have been company researches for TCP-Westwood algorithms in wireless TCP environment with high packet loss rate. Because the TCP-Westwood algorithm adjusts the congestion window according to the ABE(Available Bandwidth Estimation), the algorithm has a problem which the accuracy of ABE decreases as the error rate increases. To solve such a problem, the proposed scheme in this paper adopts the existing packet pattern based algorithm that the ABE is ignored when the arriving interval time of ACK is longer than a given interval time and uses new algorithm that the ABE is reallocated to a given allowable ABE when the ABE is over the allowable range. The proposed scheme shows the simulation result that the ABE is closest to the setting bandwidth for simulation compared to the existing algorithms.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.11
• /
• pp.84-90
• /
• 2010

In this paper, the reduced size of broad bandpass filter with parallel coupled line structure is presented. This proposed filter can control bandwidth of narrow to broadband by adjusting the coupling coefficient. The conventional filter is operated with a narrow band. If a higher bandwidth is desired than the conventional narrow bandwidth, it is hard to realize due to the coupling coefficient between feeding line and resonator. In this paper, to overcome this limitation, a proposed bandpass filter is designed with reduced size due to SIR(Stepped Impedance Resonator) and multi-grade type structures than conventional one, and it has characteristics of adjusting bandwidth freely as per quantity of coupling coefficient. The proposed bandpass filter that, experimental results of insertion and return losses are 0.42 dB and 20.9 dB with bandwidth of 60 % at the center frequency of 5.8 GHz, respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.2A
• /
• pp.86-96
• /
• 2006

In recent year, EPON(Ethernet PON) system is expected to be more attractive solutions for high speed, broadband access networks in next generation access networks due to the conversionce of low-cost ethernet equipment and low-cost fiber infrastructure. Upstream channel control algorithm is essential to hare upstream bandwidth in EPON. In this paper, we suggest HUHG(High Utilization and Hybrid Granting) algorithm for supporting high bandwidth utilization and QoS for different service class. This algorithm improves bandwidth utilization as removing or diminishing idle time of upstream channel using characteristics of fixed EF(Expedited Forwarding) sub-cycle. The proposed algorithm also minimizes the packet delay and delay variation of EF class. We conduct detailed simulation experiments using OPNET to study the performance and validate the effectiveness of the proposed algorithm.