• 대한전자공학회논문지SD
• /
• 제44권10호
• /
• pp.17-22
• /
• 2007

이 논문에서는 PHS용 new automatic tuning 방법을 가지는 baseband complex bandpass filter를 제안하였다. DC offset 문제를 해결하기 위한 Low_IF 구조로 CMOS로만 집적된 PHS용 수신기를 설계하였다. ACS 특성을 만족시키기 위해 3차 Chebyshev complex filter를 이용하여 baseband를 선택할 수 있는 filter를 설계하였다. 새롭게 제시한 Comer frequency tuning 방법은 공정의 변화에 보상을 해주는 방식이고, MOS 스위치에 의한 노이즈 레벨을 감소시킨다. 이 filter는 CMOS 0.35um 공정이며, 전력소모는 12mW였다.

• 전기학회논문지
• /
• 제60권12호
• /
• pp.2299-2304
• /
• 2011

In this paper, we propose the methodology to make the bandpass filters for the Smart Grid IED(Intelligent Electronic Device) smaller than the conventional bandpass filters. The size-reduction of the filters and the filter performances are indebted to devising small CRLH(composite right- and left-handed) resonators and coupling them as the metamaterial structures. The design methodology is validated by the equivalent circuit to be compared with the reliable full-wave EM simulation, and the proposed metamaterial filter outperforms the standard parallel-edge coupled filter with respect to the miniaturization and frequency response.

• Journal of electromagnetic engineering and science
• /
• 제7권4호
• /
• pp.190-194
• /
• 2007

In this paper, a cross-coupled microstrip combline bandpass filter using stepped-impedance resonators(SIRs) is proposed. In order to improve the selectivity as well as the insertion loss, the SIR configuration is used. The cross coupling is also introduced to enhance the selectivity. The improvement of the insertion loss is demonstrated not only by deriving the quality factor of the SIR but through the measured performances. Both the proposed and the conventional combline bandpass filter with 5 % of fractional bandwidth at 2 GHz were fabricated and tested. Compared to the conventional combline bandpass filter, the proposed one exhibits the improved selectivity as well as the lower insertion loss characteristics.

• Journal of electromagnetic engineering and science
• /
• 제11권4호
• /
• pp.257-261
• /
• 2011

A highly efficient 2.4 GHz rectenna is designed using a harmonic rejection bandpass filter. The rectenna is printed on Rogers Duroid 5880 substrate with ${\varepsilon}_r$=2.2 and a thickness of 1.6 mm. The rectenna consists of a microstrip antenna and high order harmonic rejection bandpass filter, microstrip lowpass filter, and Schottky barrier diode (HSMS2820). The use of a $2^{nd}$ and $3^{rd}$ harmonic rejection microstrip bandpass filter in the rectenna results in high conversion efficiency. The proposed rectenna achieves a RF to DC conversion efficiency of 72.17 % when the received RF power is 63.09 mW.

• Journal of electromagnetic engineering and science
• /
• 제8권4호
• /
• pp.144-147
• /
• 2008

This paper proposes a tunable combline bandpass filter with high selectivity, constant bandwidth, and good stopband performances. A filter with these characteristics is obtained by applying cross-coupling to the conventional combline bandpass filter using stepped-impedance resonators(SIRs). For high selectivity and constant bandwidth, cross-coupling is utilized and the SIR configuration is used for enhanced stopband performances. The proposed combline tunable bandpass filter with 5% of fractional bandwidth at 1.6 GHz was fabricated and tested. The measured results showed 11.6% tunability with constant bandwidth, high selectivity and enhanced stopband characteristics.

• ETRI Journal
• /
• 제30권4호
• /
• pp.615-617
• /
• 2008

A novel and compact elliptic-function bandpass filter is proposed in this letter. The techniques of slot etching and the addition of open stubs are applied to enhance the self-inductance and self-capacitance of hexagonal open-loop resonators. Thus, size reduction and improved transmission performance are obtained. Compared to the performance of the conventional design, the central frequency and insertion loss are reduced by 28% and 3.1 dB, respectively. Measurements show that the proposed filter has a fraction bandwidth of 23% at the central frequency of 1.84 GHz, and its insertion loss in the passband is less than -1.5 dB. The bandpass filter occupies only 12 mm${\times}$21.2 mm (approximately $0.24{\lambda}_g{\times}0.14{\lambda}_g$).

• Journal of Magnetics
• /
• 제22권2호
• /
• pp.275-280
• /
• 2017

A magnetic-field tunable 2.4 GHz microwave bandpass filter having insertion loss < -5dB on an FR4 substrate with the flaky magnetic material was designed and characterized. The tunability in the designed bandpass filter was achieved by adhering soft magnetic materials on top of the device. This soft magnetic material can be composed of ferromagnetic substance or ferrimagnetic substance. The performance of the designed bandpass filter under its influence is investigated. The frequency offset ratio changes over 30 %. There is over 20 % change in the center frequency towards the lower frequency region due to this application. These magnetic material layers achieved the center frequency shift and bandwidth extension without actually changing the original structure of the device.

• 한국항해항만학회지
• /
• 제31권9호
• /
• pp.759-762
• /
• 2007

A novel miniaturized CMOS C-Band bandpass filter based on diagonally end-shorted coupled lines and interdigital capacitors is proposed. The utilized coupled lines structure reduced the configuration in size, as small as a few degrees. Moreover, the characteristic of interdigital capacitor, relatively high Q and good capacitance tolerance, accounts for the satisfied performance of this new filter. A two-stage bandpass filter was designed and fabricated with chip surface area only $1.02{\times}1.4\;mm^2$.

• 한국전자파학회논문지
• /
• 제27권5호
• /
• pp.424-429
• /
• 2016

본 논문은 인공전송선로 중 하나인 LUC(Low-pass filter Unit Cell)을 이용한 이중모드 링-공진기 대역통과 여파기를 제안한다. 기존의 링 공진기 대역통과 여파기는 한 파장 링 공진기를 기반으로 설계하므로 소형화에 어려움이 있고, 정수배 파장의 고조파로 인한 원치 않는 동작의 문제점이 있다. 저역통과 특성을 지닌 인공전송선로 중 하나인 LUC를 이용하여 링-공진기를 구성함으로써 소형화와 고조파 저지 특성을 구현하였다. 링-공진기와 입력 및 출력 단의 인터디지탈 결합선로 인버터를 이용하여 2단 대역통과 여파기를 설계 및 제작하였다. 제작된 여파기는 이중모드, UWB 전 대역저지, 날카로운 스커트 특성을 나타냈으며, 기존의 링-공진기 대역통과 여파기의 링 면적을 약 60 % 감소시켰다.

• 한국전자파학회논문지
• /
• 제18권6호
• /
• pp.674-679
• /
• 2007

본 논문에서는 이중 모드 마이크로스트립 링 공진기의 크기를 줄이기 위해 4개의 개방 스터브를 삽입하였고, 이를 이용해 중심 주파수 2 GHz에서 100 MHz의 대역폭을 갖는 대역 통과 필터를 설계하였다. 삽입된 개방 스터브의 캐패시턴스 값에 따라 링 공진기의 크기를 조절할 수 있고, 스터브들의 두 가지 조합 형태 각각의 경우에 대역 통과 필터를 설계할 수 있음을 보였다. 제안된 구조를 2단 대역 통과 필터 회로로 모델링하여 위의 두 가지 경우에 각각 필터를 설계 및 제작하였으며, 설계 결과와 측정 결과가 잘 일치함을 확인하였다.