• Journal of the Korea Society of Computer and Information
• /
• v.18 no.4
• /
• pp.35-43
• /
• 2013

As texture images have become prevalent throughout a variety of industrial applications, copyright protection of these images has become important issues. For this reason, this paper proposes a color-texture image watermarking algorithm utilizing texture properties inherent in the image. The proposed algorithm selects suitable blocks to embed a watermark using the energy and homogeneity properties of the grey level co-occurrence matrices as inputs for the fuzzy c-means clustering algorithm. To embed the watermark, we first perform a discrete wavelet transform (DWT) on the selected blocks and choose one of DWT subbands. Then, we embed the watermark into discrete cosine transformed blocks with a gain factor. In this study, we also explore the effects of the DWT subbands and gain factors with respect to the imperceptibility and robustness against various watermarking attacks. Experimental results show that the proposed algorithm achieves higher peak signal-to-noise ratio values (47.66 dB to 48.04 dB) and lower M-SVD values (8.84 to 15.6) when we embedded a watermark into the HH band with a gain factor of 42, which means the proposed algorithm is good enough in terms of imperceptibility. In addition, the proposed algorithm guarantees robustness against various image processing attacks, such as noise addition, filtering, cropping, and JPEG compression yielding higher normalized correlation values (0.7193 to 1).

• Journal of the Institute of Convergence Signal Processing
• /
• v.14 no.2
• /
• pp.136-146
• /
• 2013

In this paper, the residual delay compensation algorithm is proposed for FX-type KJJVC. In case of initial version as that design algorithm of KJJVC, the integer calculation and the cos/sin table for the phase compensation coefficient were introduced in order to speed up of calculation. The mismatch between data timing and residual delay phase and also between bit-jump and residual delay phase were found and fixed. In final design of KJJVC residual delay compensation algorithm, the initialization problem on the rotation memory of residual delay compensation was found when the residual delay compensated value was applied to FFT-segment, and this problem is also fixed by modifying the FPGA code. Using the proposed residual delay compensation algorithm, the band shape of cross power spectrum becomes flat, which means there is no significant loss over the whole bandwidth. To verify the effectiveness of proposed residual delay compensation algorithm, we conducted the correlation experiments for real observation data using the simulator and KJJVC. We confirmed that the designed residual delay compensation algorithm is well applied in KJJVC, and the signal to noise ratio increases by about 8%.

• Journal of the Korean Chemical Society
• /
• v.51 no.2
• /
• pp.178-185
• /
• 2007

Intermediate pentasil borosilicate zeolite-like materials have been crystallized by a novel method named steam-assisted conversion, which involves vapor-phase transport of water. Indeed, amorphous powders obtained by drying Na2O.SiO2.B2O3.TBA2O gels of various compositions using different boron sources are transformed into crystalline borosilicate zeolite belonging to pentasil family structure by contact with vapors of water under hydrothermal conditions. Using a variant of this method, a new material which has an intermediate structure of MFI/MEL in the ratio 90:10 was crystallized. The results show that steam and sufficiently high pH in the reacting hydrous solid are necessary for the crystallization to proceed. Characterization of the products shows some specific structural aspects which may have its unique catalytic properties. X-ray diffraction patterns of these microporous crystalline borosilicates are subjected to investigation, then, it is shown that the product structure has good crystallinity and is interpreted in terms of regular stacking of pentasil layers correlated by inversion centers (MFI structure) but interrupted by faults consisting of mirror-related layers (MEL structure). The products are also characterized by nitrogen adsorption at 77 K that shows higher microporous volume (0.160 cc/g) than that of pure MFI phase (0.119 cc/g). The obtained materials revealed high surface area (~600 m2/g). The infrared spectrum reveals the presence of an absorption band at 900.75 cm-1 indicating the incorporation of boron in tetrahedral sites in the silicate matrix of the crystalline phase.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.20 no.3
• /
• pp.107-112
• /
• 2010

The Cu$(In_{1-x}Ga_x)Se_2$ is the absorber material for thin film solar cell with high absorption coefficient of $1{\times}10^5cm^{-1}$. In the case of CIGS, the movable energy band gap from $CuInSe_2$ (1.00 eV) to $CuGaSe_2$ (1.68 eV) can be acquired while controlling Ga contain ratio. Generally, the co-evaporator method have used for development and fabrication of the CIGS absorption layer. However, this method should need many steps and lengthy deposition time with high temperature. For these reasons, in this paper, a new growth method of CIGS layer was attempted to hydride vapor transport (HVT) method. The CIGS mixed-source material reacted for HCl gas in the source zone was deposited on the substrate after transporting to growth zone. c-plane $Al_2O_3$ and undoped GaN were used as substrates for growth. The characteristics of grown samples were measured from SEM and EDS.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.11
• /
• pp.1653-1660
• /
• 2016

The synthetic aperture rardar (SAR) is an active sensor using microwaves. It transmits a microwave signal, called a chirp pulse, and receives the reflected signal in a moving platform such as satellite and unmanned aerial vehicle. Since this sensor uses microwaves that can penetrate the atmosphere, SAR generates the images regardless of light and weather conditions. However SAR operates on the moving platform, the Doppler shift and the side-looking observation method should be considered. In addtion, a residual image or ghost image can be occurred according to selection of the pulse repetition frequency (PRF). In this paper, a range design of the PRF for the L-band spaceborne SAR system is studied for prevention of SAR image distortion. And the system is studied for prevention of SAR image distortion. And the system parameter and the PRF are calibrated iteratively according to the proposed system design procedure and design constraints. The MATLAB based on SAR system simulator has been developed to verify the validity of calculated PRF. The developed simulator assumes that SAR sensor is operated by the PRF calculated from the design. The results of the simulator show that the targets in image has a valid peak to side-lobe ratio (PSLR) so that the PRF can be used for the spaceborne SAR sensor.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.1
• /
• pp.111-116
• /
• 2017

We propose the compact circular polarized antenna. The radiation elements of the proposed antenna is designed using FR4 substrate with the size of $25mm{\times}3.2mm{\times}5mm$ and stand on four corners of the feed network substrate. The feeder network is designed on FR4 substrate with the size of $40mm{\times}40mm{\times}0.8mm$ and has four oupt signals with same magnitude and $90^{\circ}$ phase difference. The input impedances of the designed radiation elements and the output impedances of the feeder network are $100{\Omega}$. The designed antenna has the dimension of $40mm{\times}40mm{\times}5.8mm$ and the operated frequency band of 1.559 - 1.609 GHz. The fabricated antenna has RHCP radiation pattern and the measured results of axial ratio less than 3.5 dB and radiated gain more than 1.5 dBic. The fabricated antenna can apply to GLONASS and Beiodu systems as well as GPS system.

• Food Science and Preservation
• /
• v.21 no.6
• /
• pp.776-783
• /
• 2014

Kimchi cabbages were cut ($3{\times}3cm$), and were pre-heat treated at $40^{\circ}C$, and their physicochemical qualities and browning degrees were investigated during 8 weeks storage at $5^{\circ}C$. The Cut kimchi cabbages were treated at $40^{\circ}C$ (1~8 hrs) and their protein bands profiles were determined by sodium dodecyl sulfate polyacrylamide electrophoresis (SDS-PAGE). The 60, 39, 33, and 12 kDa bands considered heat shock proteins (HSPs) were expressed in the cut kimchi cabbage, and the 4-hr pre-heat treatment (HS 4) exhibited the strongest band ratio. The weight ratios and titratable acidities of the pre-heat treated cut kimchi cabbages were not changed so much after 8 weeks storage at $5^{\circ}C$, and the soluble solid contents of HS 4 decreased less than that of any other treatments. The browning degree of HS 4 after 8 week storage was also shown to be the least among the treatments. The polyphenol oxidase (PPO) activities of all treatments slightly rose during the over all storage period, in contrast with the decrease of total phenolic contents. The expression of HSPs was identified in the pre-heat treated cut kimchi cabbages, and HS 4 exhibited the best quality and appearance after 8 weeks storage at $5^{\circ}C$.

• Advances in pediatric surgery
• /
• v.1 no.2
• /
• pp.140-148
• /
• 1995

To study the clinical profiles and outcome of surgery in infants with esophageal atresia, we reviewed 96 esophageal atresia cases who were treated from April, 1978 to June, 1995. There were 51 male and 45 female infants, a ratio of 1.1:1. The low birth weight(<2500g) patients were 32%. Clinical findings at the time of diagnosis included drooling in 57%, choking in 50%, cyanosis in 38%, respiratory distress in 27% and swallowing difficulty in 20%. Gross classification included 6 cases of type A esophageal atresia(6%), 79 cases of type C(82%), 3 cases of type E (3%) and 8 cases of type F(8%). Associated anomalies occurred in 34 infants(35%). Among them, cardiac anomalies were most common(60%). A primary repair of the defect was carried out in 76 patients with type A or C. A staged operation comprising a repair or gastric tube interposition after gastrostomy was performed in 8 patients. In all 3 infants with H-type, a division of fistula was performed. Esophageal resection and anastomosis was done in 8 infants with esophageal stenosis. In one infant, a gastrostomy was performed and he expired before staged operation. Anastomotic complications included leakage in 16 cases(17%), stricture in 37 cases(39%) and recurrent tracheoesopohageal fistula in 3 cases(3%). The mortality rate was 14% and the leading cause of death was pneumonia. The overall survival rate was 86%, and according to Waterston criteria, the survival rates were 93%, 85% and 58% in class A, Band C, respectively. 75 patients were followed up with median follow up 6.4 years. Among them, 93% were uneventful and 7% had frequent pneumonia.

• Transactions of the Korean hydrogen and new energy society
• /
• v.10 no.1
• /
• pp.59-69
• /
• 1999

AlN thin films were fabricated by reactive sputtering for the application of MIS devices with Al/AlN/Si structure. It has investigated the surface morphology change, I-V characteristics, C-V characteristics, and chemical composition of AlN films with the intriducing time of hydrogen on the fixed deposition condition(RF power: 150W, sputtering pressure: 5mTorr, flow rate ratio of $Ar/N_2=1$, hydrogen concentration: 5%). By addition of the hydrogen the deposition rate decreased drastically whereas the surface morphology changed little. It has been found from the analysis of I-V and C-V characteristics curves that the films deposited with hydrogen addition in initial stage had lower leakage current density, lower flat band voltage and hystersis profile when compared with those with hydrogen addition in last stage. The oxygen concentration in AlN films decreased with addition of hydrogen gas, which suggesting a profitable role in the insulation and C-V characteristics of AlN films.

• Journal of Korean Society of Forest Science
• /
• v.68 no.1
• /
• pp.32-36
• /
• 1985

Megagametophyte tissues of Pinus densiflora were subjected to study the inheritance of acid phosphatase (ACP), alcohol dehydrogenase (ADH) and catalase (CAT) isozymes by starch gel zone-electrophoresis. At least three or four zones were segregated for ACP isozyme. However, as one isozyme of ACP-A zone was separated clearly, only that isozyme was analysed. Five isozyme phenotypes (A1-A5), observed in ACP-A zone, were segregated to a simple Mendelian ratio, suggesting that these are controlled by five codominant alleles existed at ACP-A locus. Two zones of activity were segregated in the gels after staining for ADH, the more anodal zone (ADH-A) of the two was invariant in our materials. Three isozyme phenotypes (B1-B3) were observed in ADH-B zone and these variants showed a 1:1 segregation pattern, suggesting that each variant is controlled by three codominant alleles at ADH-B locus. A total of five isozyme phenotypes, composed of multiple bands, were observed in CAT isozyme. The segregation of these phenotypes in heterozygous trees did not show any significant deviation from a 1:1 segregation. Therefore, the genetic control of CAT isozyme in Pinus densiflora seeds seems to be based on a single locus (CAT-A) with Five codominant alleles ($A_1-A_5$).