• 한국정보통신학회논문지
• /
• 제3권2호
• /
• pp.281-290
• /
• 1999

본 논문에서는 INMARSAT-C형 송신기에 사용되는 L-BAND(1626.5-1646.5 MHz)용 고출력 증폭기(High Power Amplifier)를 연구 개발하였다. 제작의 간편성 때문에 전체 고출력증폭기를 크게 구동증폭단과 전력증폭단 두 부분으로 나누어 구현하였으며, 전력증폭부를 구동하기 위한 구동단은 HP사의 AT-41486을 사용하였으며, 전력증폭단은 SGS-THOMSON사의 STM1645를 사용하여 RF부와 온도보상회로를 함께 집적화하였다. 제작된 고출력증폭기는 20 MHz대역폭 내에서 소신호 이득이 36 dB 이상, 입ㆍ출력 정재파비는 1.5:1 이하이었다. 1636.5 MHz 주파수에 대해 출력전력은 42.2 dBm이상으로서 설계시 목표로 했던 출력전력 20 Watt를 얻었다.

• 한국가축번식학회지
• /
• 제13권1호
• /
• pp.40-48
• /
• 1989

Guppy fry were treated for the first 40 days of life with 0, 20, 40, 60 & 100$\mu\textrm{g}$ of estradiol per gram of food in order to change the sex of normal males to functional females(genetic male). The present investigation deals with the effects of steroid hormones, such as $\beta$-estradiol and testosterone, on the sex differentiation in guppy and tilapia. The results obtained were summarized as follows. 1. In B (20$\mu\textrm{g}$/g diet) group 17$\beta$-estradiol-treated, 67.8% of male offsprings were produced. 2. In D (60$\mu\textrm{g}$/g diet) group 17$\beta$-treated, 67% of female offsprings were produced. 3. B, D groups of genetic male brooders had significantly different effects (P<0.01) upon sex ratios of their progeny. 4. This strongly indicates that sex direction has been achieved and that the male is the heterogametic sex. 5. The group that produced the highest percentage of male offspring(male percentage of observed number to expected number was 91%) contained only full-sibling male brooders to the sex-reversed female brooders. 6. After 7 months following treatment, the sex-reversed males had ovarian portion in the anterior region and a testicular portion in the posterior region of the same intersexual gonad, respectively. 7. At 7 months after treatment, the ovareis revealed a complete arrest of the ovarian formation, and appearances of spermatogenetic cell cysts among surviving auxocytes. 8. In most of sex-reversed fish, anterior portion of test is was devoid of sperm ducts including the seminal vesicle and vas deferens. 9. The male transferrin showed two strong bands, while the female transferrin showed a single weak band. 10. One of the two bands of male transferrin showed the same mobility with band of female transferrin.

• 한국전자파학회논문지
• /
• 제19권2호
• /
• pp.244-249
• /
• 2008

본 논문에서는 Sendust와 Mn-Zn ferrite를 이용하여 2.4 GHz ISM 대역 PCB 노이즈 제거용 전파흡수체를 설계 및 제작하였다. Sendust와 Mn-Zn ferrite를 바인더인 CPE와 혼합하여 조성비별 전파흡수체 샘플을 제작하였고, 이를 분석한 결과 최적의 조성비가 Sendust : Mn-Zn ferrite : CPE=70:5:20 wt.%임을 확인하였다. 전파흡수체 샘플로부터 계산되어진 재료 정수를 이용하여 두께에 따른 흡수능의 변화를 시뮬레이션 하였으며, 시뮬레이션 결과를 토대로 전파흡수체를 실제작하여 전파 흡수능을 비교, 분석하였다. 그 결과, 시뮬레이션 결과와 실측정 결과는 잘 일치하였으며, 중심 주파수 2.4 GHz에서 흡수능 5.4 dB, 1.4$\sim$4.1 GHz 대역에서 3 dB 이상의 흡수능을 보였으며, 이때 두께는 0.85 mm이었다.

• 한국축산식품학회지
• /
• 제31권6호
• /
• pp.827-833
• /
• 2011

The objective of this study was to develop a fluorogenic real-time PCR-based assay for detecting and quantifying amounts of cow milk in cow/goat milk mixtures or goat milk products. In order to quantify the exact amount of cow milk in cow/goat raw milk mixtures and commercial goat milk products, it was necessary to achieve quantitative extraction of total genomic DNA from the raw milk matrix. Both mammalian-specific PCR and cow-specific PCR were performed. A cow-specific 252 bp band obtained from the raw cow milk and raw goat milk mixtures, commercial goat milk, and two goat milk powders was identified, along with the relationship between the cow milk amount and band intensity of the electrophoresis image. The detection threshold was found to be 0.1%. The expression of cow's 12S rRNA in the cow/goat milk mixtures, commercial goat milk, and two goat milk powders was identified. The expression quantity of the milk 12S rRNA increased with increasing ratios of the cow/goat milk mixtures. Using these calibrated relative expression levels as a standard curve in the cow/goat raw milk mixtures, the contents of cow milk were 1.8% in the commercial goat milk, 9.6% in goat milk powder A, and 11.6% in goat milk powder C. However, cow milk was not detected in goat milk powder B.

• 공업화학
• /
• 제23권6호
• /
• pp.539-545
• /
• 2012

전자를 끌어당기는 benzotriazole을 vinylene으로 thiophene과 연결한 3-(2-benzo-triazolovinyl)thiophene (BVT)을 합성하고, FT-IR 및 $^1H$-NMR, $^{13}C$-NMR, 2D hetero-cosy spectra로 구조분석을 하였다. 합성한 BVT와 3-octylthiophene (OT)을 공중합 하였다. 공중합체들은 수평균 분자량 12000 (PDI 2.67)과 15000 (PDI 2.55)을 나타내었으며, THF, TCE와 chloroform 등의 유기용매에 잘 용해되었다. 공중합체들의 BVT와 OT의 공중합된 비율은 $^1H$-NMR spectra에 의하여 BVT : OT = 1 : 1.8과 1 : 2.8 (mol/mol)로 확인되었다. 파장 470 nm와 465 nm에서 UV-vis 최대 흡수를 나타내었고, photoluminescence (PL)는 각각 ${\lambda}_{max}$ = 662 nm와 641 nm로 나타나 적색계로 관찰되었다. 공중합체의 band gap은 각각 1.96 eV, 2.02 eV로 poly(3-octylthiophene)보다 더 증가하였다. 또한, poly(3-octylthiophene)에 비해서 HOMO 에너지 준위는 모두 낮아졌으나, LUMO 에너지 준위는 모두 높아졌다.

• 한국표면공학회지
• /
• 제52권1호
• /
• pp.16-22
• /
• 2019

The structural change of DLC coatings during long-term wear test and dicing test under the low loading condition was investigated. DLC coatings were applied for the precision injection molds of a modified SNCM steel for the extension of life and the micro-diamond blades for the high cutting efficiency and the increase in life. A ball-on-disc wear tests in the mold steel and a dicing tests in the micro-diamond blades were conducted to understand degradation of DLC coatings. The degradation of DLC coatings for the injection mold steel and the micro-diamond blades during the wear and dicing tests were studied with Raman Spectroscopy. Raman peaks were divided two bands(D band and G band) to study the degradation process of DLC structure. By the wear test, polished condition of wear marks were observed to be maintained until 10 hrs of wear test period is given, but small striation marks appeared in 20 hours wear test. It was observed that $I_D/I_G$ ratios changed as the degradation of DLC coatings is proceeded during the wear tests and the dicing tests. It is suggested that the change in $I_D/I_G$ value possibly reflected from the composition of $sp^2$ and $sp^3$ bondings in DLC layers relevant to the change in mechanical and physical property.

• 한국분말재료학회지
• /
• 제28권3호
• /
• pp.259-266
• /
• 2021

The (Ga_1-xZn_x)(N_1-xO_x) solid solution is attracting extensive attention for photocatalytic water splitting and wastewater treatment owing to its narrow and controllable band gap. To optimize the photocatalytic performance of the solid solution, the key points are to decrease its band gap and recombination rate. In this study, (Ga_1-xZn_x)(N_1-xO_x) nanofibers with various Zn fractions are prepared by electrospinning followed by calcination and nitridation. The effect of the composition and crystallinity of electrospun oxide nanofibers on the morphology and optical properties of the obtained solid-solution nanofibers are systematically investigated. The results show that the final shape of the (Ga_1-xZn_x) (N_1-xO_x) material is greatly affected by the crystallinity of the oxide nanofibers before nitridation. The photocatalytic properties of (Ga_1-xZn_x)(N_1-xO_x) with different Ga:Zn atomic ratios are investigated by studying the degradation of rhodamine B under visible light irradiation.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.114-114
• /
• 2009

ZnO has received considerable attention due to its potential applicability to optoelectronic devices such as ultraviolet-light emitting diodes (UVLEDs) and laser diodes (LDs). As well known, however, polar ZnO with the growth direction along the c-axis has spontaneous and piezoelectric polarizations that will result in decreased quantum efficiency. Recently, nonpolar ZnO has been studied to avoid such a polarization effect. In order to realize applications of nonpoar ZnO-based films to LEDs, growth of high quality alloys for quantum well structures is one of the important tasks that should be solved. $Mg_xZn_{1-x}O$ and $Cd_xZn_{1-x}O$ is ones of most promising alloys for this application because the alloys of ZnO with MgO and CdO provide a wide range of band-gap engineering spanning from 2.4 to 7.8 eV. In this study, we investigated on $Mg_xZn_{1-x}O$ films grown with various Mg/Zn flux ratios The films were grown on R-plane sapphire substrates by plasma-assisted molecular beam epitaxy (PAMBE). we investigated on $Mg_xZn_{1-x}O$ films grown with various Mg/Zn flux ratios. The films were grown on R-plane sapphire substrates by plasma-assisted molecular beam epitaxy (PAMBE). With the relatively low Mg/Zn flux ratios, a typical striated anisotropic surface morphology which was generally observed from the nonpolar (11-20) ZnO film on r-plane sapphire substrates. By increasing the Mg/Zn flux ratio, however, additional islands were appeared on the surface and finally the surface morphology was entirely changed, which was generally observed for the (0001) polar ZnO films by losing the striated morphology. Investigations by X-ray $\Theta-2{\Theta}$ diffraction revealed that (0002) and (10-11) ZnO planes are appeared in $Mg_xZn_{1-x}O$ films by increasing the Mg/Zn flux ratio. Further detailed investigation by transmission electron microscopy (TEM) and photoluminescence (PL) will be discussed.

• 폴리머
• /
• 제39권1호
• /
• pp.71-77
• /
• 2015

본 연구에서는 전자가 풍부한 구조단위(dithienosilole 및 benzodithiophene)와 전자가 부족한 구조단위(difluorobenzothiadiazole)를 주사슬에 교대로 갖는 작은 밴드갭 공중합체를 Stille 짝지움 반응을 이용하여 합성하였다. $^1H$ NMR을 통하여 각 단계별 화합물과 고분자의 구조를 확인하였다. GPC, TGA, UV-vis 분광분석기 및 cyclic voltammetry를 이용하여 합성한 고분자의 특성을 조사하였다. 합성한 공액고분자와 $PC_{70}BM$을 1:1.5, 1:2, 1:3, 1:3.5 및 1:4의 중량비로 혼합하여 ITO/PEDOT:PSS/polymer:$PC_{70}BM/Al$의 구조로 유기태양전지 소자를 제작하여 그 광전특성을 조사하였다. 고분자:$PC_{70}BM$의 혼합비율이 1:3에서 최고 1.0%의 광전변환효율이 달성되었다. TEM 실험을 통하여 1:3 혼합비율에서 유기태양전지에 가장 적합한 나노규모로 상분리가 일어났으며, 다른 혼합비율에서는 고분자와 $PC_{70}BM$의 뭉침현상에 기인하여 태양전지 특성이 낮아졌다.

• 한국정보통신학회논문지
• /
• 제19권3호
• /
• pp.500-506
• /
• 2015

본 논문에서는 자성 금속재료인 센더스트(Sendust)를 이용하여 2.4 GHz ISM 대역의 전자파 노이즈 억제를 목적으로 하는 EMI/EMC 대책용 전파흡수체를 설계 제작하였다. CPE (Chlorinated Ploy-ethylene)를 바인더로 하여 압착 Sendust와의 조성비 별로 전파흡수체 샘플을 제작하였고, 이를 분석하여 최적의 조성비를 탐색하였다. 그 결과 최적의 조성비는 Flaked Sendust : CPE = 72.5 : 27.5 wt.%로 밝혀졌다. 전파 흡수체 샘플로부터 도출된 재료정수를 이용하여 두께의 변화에 따른 전파흡수능의 변화를 시뮬레이션 하였으며, 그 결과를 토대로 제작한 전파흡수체의 전파흡수능과 시뮬레이션 결과치가 잘 일치하는 것을 확인하였다. 이 경우, 중심주파수 2.4 GHz에서 5.4 dB의 전파흡수능을 보였으며, 이때 전파흡수체의 정합두께는 0.6 mm로서 종래의 전파흡수체에 비해 초박형이어서 실용성이 높고 고성능화됨을 알았다. 본 논문에 제시한 초박형화 전파흡수체는 전자회로 및 회로부품으로부터 방사되는 전자파를 억제하거나 효율적으로 흡수하여 정보통신기술의 발전에 기여할 것으로 기대된다.