• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.380-383
• /
• 2003

In this paper, we analyzed the characteristics of a modified DGS(Defected Ground Ground Structure)and extracted the equivalent citcuit of that. The proposed DGS is the structure that connects two DGS units, which are composed of the defects on the metallic ground plane and the gab on the signal line. The gab on the signal line was adopted to induce series capacitor of band pass filter. Also, to confirm the validity of the proposed structure, we designed and implemented C - Band pass filter by using the modified DGS.

• Journal of Integrative Natural Science
• /
• v.2 no.1
• /
• pp.41-44
• /
• 2009

Photonic crystals containing multiple rugate structure are prepared by electrochemical etchings. Typically etched rugate PSi prepared in this study. Etching is carried out in a Teflon cell by using a two-electrode configuration with a Pt mesh counter electrode. They exhibit sharp photonic band gaps in the optical reflectivity spectrum. This reflectivity can be tuned to appear anywhere in the visible to near-infrared spectral range, depending on the programmed etch waveform. We study the method of full width half maxima and reflectivity index control by using amplitude.

• Journal of Mechanical Science and Technology
• /
• v.17 no.1
• /
• pp.97-104
• /
• 2003

The main objectives of this study are to examine the random responses of a vibration absorber system with autoparametric coupling in the neighborhood of internal resonance subjected to narrow band random excitation by Gaussian closure scheme and to compare the results with those obtained by Monte Carlo simulation. The Monte Carlo simulation is found to support the main features of the nonlinear modal interaction in the neighborhood of internal resonance conditions. The jump phenomenon of the cantilever mode and saturation phenomenon of the main system are shown to occur if the excitation bandwidth is sufficiently small.

• Management & Information Systems Review
• /
• v.3
• /
• pp.201-214
• /
• 1999

Adaptive correlator receiver with neural network based on complex multilayer perceptron is persented for suppressing interference of narrow-band of direct spread spectrum communication systems. Recursive least square algorithm with backpropagation error is used for fast convergence and better performance in adaptive correlator scheme. According to signal noise and transmission power, computer simulation results show that bit error ratio of adaptive correlator using neural network improved that of adative transversal filter of direct sequence spread spectrum considering of jamming and narrow-band interference. Bit error ratio of adaptive correlator with neural network is reduced about 10-1 than that of adaptive transversal filter where interference versus signal ratio is 5dB.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.5
• /
• pp.388-396
• /
• 2019

This paper describes the RF(Radio Frequency) interference on the GNSS receiver due to the S-band signals transmitted from the transmitters in the Test Launch Vehicle, and analyzes the cause of the RF interference. Due to the S-band signals that have relatively high power levels compared with GNSS signals, an LNA(Low Noise Amplifier) in the active GNSS antenna was saturated, and the intermodulation signal within GNSS in-bands was produced in the LNA whenever two S-band signals were received from the GNSS antenna. For these reasons, the C/N0 of the satellite signals in the GNSS receiver was attenuated severely. The design of the LNA was changed in order to protect the RF interference due to the S-band signals and the suppression capability of the RF interference was confirmed in the new LNA through the comparison of the old LNA.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.4
• /
• pp.214-226
• /
• 1992

In this paper, the characteristics of fatigue crack growth in the spot welded joint of the same kinds of specimens($HS{\times}HS,\;GA{\times}GAB$) and different kinds of specimens($HS{\times}GA,\;HS{\times}GAB$) which consist of dual phase high strength steel(HS) and monogalvanized steel(GA) were examined with static tension tests and axial tension fatigue tests. Some of the important results are as follows : 1. The divergence of tensile strengths among the same and different kinds of spot welds under the same conditions is comparatively low regardless of the difference of stiffness. 2. At the low load bevel and long life legion, the fatigue crack is initiated near the nugget. However, in the high load level and short life region, it occurs a tittle far from the nugget. 3. It has shown a linear relation between maximum stress Intensity factor, Kmax and fatigue life, $N_f$ among each of the spot welds and has gathered in a narrow band on the log-log graph paper. $Kmax=H{\cdot}{N_f}^{P}$ where H and P are a material constant.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.306-307
• /
• 2015

유기태양전지의 대표적 Hole Transporting Layer(HTL)로는 전도성 고분자인 PEDOT:PSS이다. PEDOT:PSS는 약산성의 물질로 전극을 부식시켜 디바이스의 효율을 감소시키기 때문에 PEDOT:PSS를 대체하기 위한 Buffer층에 대한 연구가 활발히 진행되어지고 있다. PEDOT:PSS를 대체할 수 있는 Nickel Oxide(NiO) Buffer 층은 wide band-gab으로 Hole Transporting Layer와 Electron Blocking Layer 역할을 동시에 하여 디바이스의 효율을 향상시킬 수 있으며, 디바이스의 수명을 향상시킬 수 있다는 장점이 있다. NiO는 용액공정과 Sputter 증착 방법으로 형성할 수 있는데, 용액공정은 고온공정이 요구되어지고 Sputter 증착방법은 산화되기 쉬운 전극위에서는 전극의 손상을 발생한다. 본 연구에서는 이러한 단점을 해결하기 위해서 Ni을 Magnetron Sputter로 증착한 후 Ion Beam 처리를 통해 산화시켜 NiO 층을 형성하는 방법을 연구하였다. 본 연구에서 제안한 NiO형성 방법으로 유기태양전지를 제작하여 PEDOT:PSS를 Buffer층으로 사용한 태양전지와 Voc가 0.72 V로 유사하게 나와 NiO가 Buffer층으로 잘 형성된 것을 확인하였다.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.70-73
• /
• 2002

This paper describes the way to embody the grid coverage and the grid coverage processor which can construct pipelines. The pipeline constructed by the developed grid coverages has internal pipelines that have different resolution and it provides the way of access to very large datasets efficiently. Several operations, such as filtering, image enhancement and band operation, are embedded in the developed grid coverage and grid coverage processor COM components. The practical usefulness of the developed grid coverage and grid coverage processor has been proven by applying them in developing an image processing software for very large images.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.1
• /
• pp.51.4-52
• /
• 2015

From 2010 to 2014, CQUEAN (Camera for QUasars in EArly uNiverse) has been operated for the observation at the 82 inch Otto Struve Telescope of the McDonald Observatory, US. This camera is optimized at wavelength range of 0.7 - 1.1 um with seven (g', r', I', z', Y, Iz and Is) broad-band filters for the survey of high redshift (z > 5) quasars in the early universe. We are upgrading this system to identify more details of SED (Spectral Energy Distribution) of quasar candidates and other astronomical sources. The SQUEAN is comprised of a focal reducer, a CCD camera, a new filter wheel, new auto guiding system and new control software. The new filter wheel consists of interchangeable cartridges for various wavelength and size of filters. 50 nm medium bandwidth filters from 600 - 1050 nm, seven SDSS (Sloan Digital Sky Survey) filters and Johnson-Cousin BVRI filters are installed for now. We also have a plan to use narrow band interference filters to classify high redshift quasars or to obtain SEDs of interesting astronomical sources in details more efficiently. We also developed KAP82 (Kyung Hee University Auto guiding Package for 82 inch telescope) for auto guiding software. CQUEAN and SQUEAN have been developed by CEOU (Center for the Exploration of the Origin of the Universe).

• Parasites, Hosts and Diseases
• /
• v.37 no.3
• /
• pp.171-179
• /
• 1999

Non-biting midges are known to contain potent inhalant allergens. IgE antibody responses to the crude extract of Chironomus kiiensis adults, a dominant chironomid species in Korea, were examined. With the IgE-ELISA or passive cutaneous anaphylaxis reactions, increased levels of chironomid-specific IgE were detected in the skin test positived human sera, or immunized BALB/c mouse sera with the crude extract adsorbed to alum. IgE-immunoblot analysis showed mafor IgE-reacting protein band patterns, which reacted with more than 50% of the skin test positive human sera, at 110, 80, 46, 40, 37, 34 and 31 kDa. The reactive band patterns were larely similar between skin test positive humans and immune BALB/c mice. However, the bands of 55, 31, 27, 26, 24 and 23 kDa were found only in sensitized humans, but not in immunized mice.